67-2261-90 One Touch Joint M Series Reducer 12 mm-8mm PRM-12-8-PM
คุณลักษณะ
- Electroless nickel plating is applied to the metal part.
- The R (PT) screws are coated with a color sticker for each R (PT) screw that can tell the screw size at a glance.
- The body can be positioned according to the tube extraction direction.
- The joint between the R (PT) screw part and the resin such as the elbow/tee rotates, and can be freely positioned in accordance with the direction in which the tube is taken out after fitting.
- In addition, it is possible to tighten the screw while fixing the resin part.
- The tube grip rotates smoothly within the fitting and prevents the tube from turning out.
- For General Pneumatic and Hydraulic Piping
- for robots and labor-saving equipment
ข้อมูลจําเพาะ
- Applicable Tube Outer Diameter D1 (mm): 8
- Operating Temperature Range (°C): Air: 0~60°C, Water: 0~30°C(Do not freeze.)
- Fluids used: Air, Water
- Hex Opposite Side (mm): 17
- Compatible joint size D2 (mm): 12
- Fluids used: Air, Water
- Fluid Temperature: Air: 0~60°C, Water: 0~30°C(Do not freeze.)
- Maximum Working Pressure: Air: 0.97 MPa, Water: 0.19 MPa
- Working vacuum pressure (when the working fluid is air): 1.4 kPa or more
- Applicable Tube (when the fluid used is air): Nylon Tube (AS1, AS4), Tube for Spot Welding Equipment (SP4, SPF), Polyurethane Tube (UH, UF, UFL, UE, UC)
- Applicable Tube (When Using Water): Nylon Tube (AS1), Tube for Spot Welding Equipment (SP4, SPF)
- Material/Finish: Body (Resin)/Polybutylene Terephthalate (PBT)
- Note:If the maximum operating pressure of the tube is lower than the above pressure, use the tube at the maximum operating pressure or less.
- Note:When using a tube other than the applicable tube, please use a tube whose outer diameter accuracy is within ±0.1 mm of nylon and within ±0.15 mm of urethane, and whose roundness is within 0.2 mm of maximum outer diameter and minimum outer diameter.
- Country of Origin: Japan
- Securities Code: 383-8356
ขนาดแพ็คเกจ：50×17×17 mm [เกี่ยวกับขนาดแพ็คเกจ]
| หมายเลขใบสั่ง | 67-2261-90 | |
|---|---|---|
| หมายเลขแบบจําลอง | PRM-12-8-PM | |
| ราคามาตรฐาน |
JPY: 246
USD: 1.54
Excange rate 1USD= 159.53JPY
Valid price in Japan |
|
| ปริมาณ | 1piece | |
| หุ้นในประเทศญี่ปุ่น |
|
|
| หุ้นซัพพลายเออร์ |
|
|
ผลิตภัณฑ์ที่เกี่ยวข้อง (ขนาดที่แตกต่างกัน, ข้อมูลจําเพาะ,ผลิตภัณฑ์ตัวเลือก ฯลฯ)
| รูปภาพผลิตภัณฑ์ | หมายเลขใบสั่ง | ชื่อ | หมายเลขแบบจําลอง | ปริมาณ | ราคามาตรฐาน | ราคาที่ถูกต้องในประเทศญี่ปุ่น | หุ้น [หุ้นซัพพลายเออร์] |
|
|---|---|---|---|---|---|---|---|---|
 |
67-2261-77 | One Touch Joint M Series Reducer 12 mm-10mm PRM-12-10-PM | PRM-12-10-PM | 1piece | JPY: 254 | USD: 1.59 |
|
|
 |
67-2261-90 | One Touch Joint M Series Reducer 12 mm-8mm PRM-12-8-PM | PRM-12-8-PM | 1piece | JPY: 246 | USD: 1.54 |
|
|
 |
67-2262-03 | One Touch Joint M Series Reducer 10 mm-8mm PRM-10-8-PM | PRM-10-8-PM | 1piece | JPY: 236 | USD: 1.48 |
|
|
 |
67-2262-13 | One Touch Joint M Series Reducer 10 mm-6mm PRM-10-6-PM | PRM-10-6-PM | 1piece | JPY: 229 | USD: 1.44 |
|
|
 |
67-2262-25 | One Touch Joint M-Series Reducer 8 mm-4mm PRM-8-4-PM | PRM-8-4-PM | 1piece | JPY: 218 | USD: 1.37 |
|
|
 |
67-2262-36 | One Touch Joint M Series Reducer 8 mm-6mm PRM-8-6-PM | PRM-8-6-PM | 1piece | JPY: 218 | USD: 1.37 |
|
|
 |
67-2262-44 | One Touch Joint M-Series Reducer 6 mm-4mm PRM-6-4-PM | PRM-6-4-PM | 1piece | JPY: 210 | USD: 1.32 |
|