67-2261-53 Stainless Steel Joint Nipple (Inch G Series) 3.18 x 1.65 mm PT1/8 N-18G-PT18-SUS
คุณลักษณะ
- Composed of highly corrosion-resistant SUS316.
- Can be used in a wide temperature range from low to high.
- You can select a special fitting that is optimally designed for each tube material.
- The tube does not turn out due to over-tightening the bag nut.
- There is no problem with the connection until the tube ruptures.
- There is no need to manage tightening torque of bag nuts.
- For Corrosive Fluid Piping
- For Hydraulic Piping
- For Rust-Proof Piping
ข้อมูลจําเพาะ
- Applicable Tube Outer Diameter D (mm): 3.18
- Hex Opposite Side (mm): 10
- Connection Diameter: PT1/8
- Operating temperature range (°C): – 65~180 (air), 0~180 (water), – 65~180 (corrosive fluid)
- Fluids used: Air, Water, Corrosive Fluid
- Compatible joint size D (mm): 3.18
- Hex Opposite Side (mm) Body: 10
- Applicable Tube Inner Diameter (mm): 1.65
- Hex Opposite Side (mm) Mounting Nut: 10
- Fluid Temperature (°C): – 65~180°C (air), 0~180°C (water), – 65~180°C (corrosive fluid)
- Maximum working pressure: according to tube maximum working pressure
- Maximum vacuum pressure in use: 0.014 kPa or more
- Compatible Tube: Multilayer Tube AP1, AP4, Fluorine Tube TA, TF, Nylon Tube AS1, AS4(Air, Water Only)
- Material/Finish: Stainless Steel (SUS316)
- Note:If the temperature range of the tube is within the temperature range of the joint, give priority to the temperature range of the tube.
- Country of Origin: Japan
- Securities Code: 383-0582
ขนาดแพ็คเกจ：27×10×10 mm [เกี่ยวกับขนาดแพ็คเกจ]
| หมายเลขใบสั่ง | 67-2261-53 | |
|---|---|---|
| หมายเลขแบบจําลอง | N-18G-PT18-SUS | |
| ราคามาตรฐาน |
JPY: 1,631
USD: 10.22
Excange rate 1USD= 159.53JPY
Valid price in Japan |
|
| ปริมาณ | 1piece | |
| หุ้นในประเทศญี่ปุ่น |
|
|
| หุ้นซัพพลายเออร์ |
|
|
ผลิตภัณฑ์ที่เกี่ยวข้อง (ขนาดที่แตกต่างกัน, ข้อมูลจําเพาะ,ผลิตภัณฑ์ตัวเลือก ฯลฯ)
| รูปภาพผลิตภัณฑ์ | หมายเลขใบสั่ง | ชื่อ | หมายเลขแบบจําลอง | ปริมาณ | ราคามาตรฐาน | ราคาที่ถูกต้องในประเทศญี่ปุ่น | หุ้น [หุ้นซัพพลายเออร์] |
|
|---|---|---|---|---|---|---|---|---|
 |
67-2257-39 | Stainless Steel Joint Nipple (Inch G Series) 9.53 x 6.35 mm PT1/2 N-38G-PT12-SUS | N-38G-PT12-SUS | 1piece | JPY: 2,356 | USD: 14.77 |
|
|
 |
67-2257-52 | Stainless Steel Joint Nipple (Inch G Series) 9.53 x 6.35 mm PT3/8 N-38G-PT38-SUS | N-38G-PT38-SUS | 1piece | JPY: 1,994 | USD: 12.50 |
|
|
 |
67-2258-21 | Stainless Steel Joint Nipple (Inch G Series) 9.53 x 6.35 mm PT1/4 N-38G-PT14-SUS | N-38G-PT14-SUS | 1piece | JPY: 1,631 | USD: 10.22 |
|
|
 |
67-2258-54 | Stainless Steel Joint Nipple (Inch G Series) 6.35 x 3.96 mm PT3/8 N-14G-PT38-SUS | N-14G-PT38-SUS | 1piece | JPY: 1,776 | USD: 11.13 |
|
|
 |
67-2259-57 | Stainless Steel Joint Nipple (Inch G Series) 6.35 x 3.96 mm PT1/4 N-14G-PT14-SUS | N-14G-PT14-SUS | 1piece | JPY: 1,505 | USD: 9.43 |
|
|
 |
67-2260-76 | Stainless Steel Joint Nipple (Inch G Series) 3.18 x 1.65 mm PT1/4 N-18G-PT14-SUS | N-18G-PT14-SUS | 1piece | JPY: 1,668 | USD: 10.46 |
|
|
 |
67-2261-10 | Stainless Steel Joint Nipple (Inch G Series) 6.35 x 3.96 mm PT1/8 N-14G-PT18-SUS | N-14G-PT18-SUS | 1piece | JPY: 1,269 | USD: 7.96 |
|
|
 |
67-2261-53 | Stainless Steel Joint Nipple (Inch G Series) 3.18 x 1.65 mm PT1/8 N-18G-PT18-SUS | N-18G-PT18-SUS | 1piece | JPY: 1,631 | USD: 10.22 |
|