67-2258-94 One Touch Joint M Series Bulkhead Union 10 mm PUPM-10-BSM
คุณลักษณะ
- Electroless nickel plating is applied to the metal part.
- The R (PT) screws are coated with a color sticker for each R (PT) screw that can tell the screw size at a glance.
- The body can be positioned according to the tube extraction direction.
- The joint between the R (PT) screw part and the resin such as the elbow/tee rotates, and can be freely positioned in accordance with the direction in which the tube is taken out after fitting.
- In addition, it is possible to tighten the screw while fixing the resin part.
- The tube grip rotates smoothly within the fitting and prevents the tube from turning out.
- For General Pneumatic and Hydraulic Piping
- for robots and labor-saving equipment
ข้อมูลจําเพาะ
- Applicable Tube Outer Diameter D (mm): 10 x 10
- Hex Opposite Side (mm): 24
- Operating Temperature Range (°C): Air: 0~60°C, Water: 0~30°C(Do not freeze.)
- Fluids used: Air, Water
- Fluids used: Air, Water
- Fluid Temperature: Air: 0~60°C, Water: 0~30°C(Do not freeze.)
- Maximum Working Pressure: Air: 0.97 MPa, Water: 0.19 MPa
- Working vacuum pressure (when the working fluid is air): 1.4 kPa or more
- Applicable Tube (when the fluid used is air): Nylon Tube (AS1, AS4), Tube for Spot Welding Equipment (SP4, SPF), Polyurethane Tube (UH, UF, UFL, UE, UC)
- Applicable Tube (When Using Water): Nylon Tube (AS1), Tube for Spot Welding Equipment (SP4, SPF)
- Material/Finish: Body (Metal)/Brass (Nickel Plating)
- Note:If the maximum operating pressure of the tube is lower than the above pressure, use the tube at the maximum operating pressure or less.
- Note:When using a tube other than the applicable tube, please use a tube whose outer diameter accuracy is within ±0.1 mm of nylon and within ±0.15 mm of urethane, and whose roundness is within 0.2 mm of maximum outer diameter and minimum outer diameter.
- Country of Origin: Japan
- Securities Code: 383-8338
ขนาดแพ็คเกจ：42×24×24 mm [เกี่ยวกับขนาดแพ็คเกจ]
| หมายเลขใบสั่ง | 67-2258-94 | |
|---|---|---|
| หมายเลขแบบจําลอง | PUPM-10-BSM | |
| ราคามาตรฐาน |
JPY: 671
USD: 4.18
Excange rate 1USD= 160.72JPY
Valid price in Japan |
|
| ปริมาณ | 1piece | |
| หุ้นในประเทศญี่ปุ่น |
|
|
| หุ้นซัพพลายเออร์ |
|
|
ผลิตภัณฑ์ที่เกี่ยวข้อง (ขนาดที่แตกต่างกัน, ข้อมูลจําเพาะ,ผลิตภัณฑ์ตัวเลือก ฯลฯ)
| รูปภาพผลิตภัณฑ์ | หมายเลขใบสั่ง | ชื่อ | หมายเลขแบบจําลอง | ปริมาณ | ราคามาตรฐาน | ราคาที่ถูกต้องในประเทศญี่ปุ่น | หุ้น [หุ้นซัพพลายเออร์] |
|
|---|---|---|---|---|---|---|---|---|
 |
67-2257-21 | One Touch Joint M Series Bulkhead Union 12 mm PUPM-12-BSM | PUPM-12-BSM | 1piece | JPY: 906 | USD: 5.64 |
|
|
 |
67-2258-94 | One Touch Joint M Series Bulkhead Union 10 mm PUPM-10-BSM | PUPM-10-BSM | 1piece | JPY: 671 | USD: 4.18 |
|
|
 |
67-2259-48 | One Touch Joint M Series Bulkhead Union 8 mm PUPM-8-BSM | PUPM-8-BSM | 1piece | JPY: 544 | USD: 3.39 |
|
|
 |
67-2260-20 | One Touch Joint M Series Bulkhead Union 6 mm PUPM-6-BSM | PUPM-6-BSM | 1piece | JPY: 508 | USD: 3.16 |
|
|
 |
67-2260-49 | One Touch Joint M Series Bulkhead Union 4 mm PUPM-4-BSM | PUPM-4-BSM | 1piece | JPY: 490 | USD: 3.05 |
|