67-2256-57 Stainless Steel Joint Elbow (Inch G Series) 9.53 x 6.35 mm PT1/4 L-38G-PT14-SUS
คุณลักษณะ
- Composed of highly corrosion-resistant SUS316.
- Can be used in a wide temperature range from low to high.
- You can select a special fitting that is optimally designed for each tube material.
- The tube does not turn out due to over-tightening the bag nut.
- There is no problem with the connection until the tube ruptures.
- There is no need to manage tightening torque of bag nuts.
- For Corrosive Fluid Piping
- For Hydraulic Piping
- For Rust-Proof Piping
ข้อมูลจําเพาะ
- Applicable Tube Outer Diameter D (mm): 9.53
- Connection Diameter: PT1/4
- Hex Opposite Side (mm): 19
- Operating temperature range (°C): – 65~180 (air), 0~180 (water), – 65~180 (corrosive fluid)
- Fluids used: Air, Water, Corrosive Fluid
- Applicable Tube Inner Diameter (mm): 6
- Hex Opposite Side (mm) Body: 19
- Hex Opposite Side (mm) Mounting Nut: 17
- Fluids used: Air, Water, Corrosive Fluid
- Fluid temperature: – 65~180°C (air), 0~180°C (water), – 65~180°C (corrosive fluid)
- Maximum working pressure: according to tube maximum working pressure
- Maximum vacuum pressure in use: 0.014 kPa or more
- Applicable Tube: Multilayer Tube AP1, AP4, Fluorine Tube TA, TF, Nylon Tube AS1, AS4(Air, Water Only)
- Material/Finish: Stainless Steel (SUS316)
- Note:If the temperature range of the tube is within the temperature range of the joint, give priority to the temperature range of the tube.
- Country of Origin: Japan
- Securities Code: 383-2129
ขนาดแพ็คเกจ：39×39×17 mm [เกี่ยวกับขนาดแพ็คเกจ]
| หมายเลขใบสั่ง | 67-2256-57 | |
|---|---|---|
| หมายเลขแบบจําลอง | L-38G-PT14-SUS | |
| ราคามาตรฐาน |
JPY: 2,719
USD: 17.04
Excange rate 1USD= 159.53JPY
Valid price in Japan |
|
| ปริมาณ | 1piece | |
| หุ้นในประเทศญี่ปุ่น |
|
|
| หุ้นซัพพลายเออร์ |
|
|
ผลิตภัณฑ์ที่เกี่ยวข้อง (ขนาดที่แตกต่างกัน, ข้อมูลจําเพาะ,ผลิตภัณฑ์ตัวเลือก ฯลฯ)
| รูปภาพผลิตภัณฑ์ | หมายเลขใบสั่ง | ชื่อ | หมายเลขแบบจําลอง | ปริมาณ | ราคามาตรฐาน | ราคาที่ถูกต้องในประเทศญี่ปุ่น | หุ้น [หุ้นซัพพลายเออร์] |
|
|---|---|---|---|---|---|---|---|---|
 |
67-2255-59 | Stainless Steel Joint Elbow (Inch G Series) 9.53 x 6.35 mm PT1/2 L-38G-PT12-SUS | L-38G-PT12-SUS | 1piece | JPY: 3,553 | USD: 22.27 |
|
|
 |
67-2256-46 | Stainless Steel Joint Elbow (Inch G Series) 9.53 x 6.35 mm PT3/8 L-38G-PT38-SUS | L-38G-PT38-SUS | 1piece | JPY: 2,900 | USD: 18.18 |
|
|
 |
67-2256-57 | Stainless Steel Joint Elbow (Inch G Series) 9.53 x 6.35 mm PT1/4 L-38G-PT14-SUS | L-38G-PT14-SUS | 1piece | JPY: 2,719 | USD: 17.04 |
|
|
 |
67-2256-74 | Stainless Steel Joint Elbow (Inch G Series) 6.35 x 3.96 mm PT3/8 L-14G-PT38-SUS | L-14G-PT38-SUS | 1piece | JPY: 2,810 | USD: 17.61 |
|
|
 |
67-2257-87 | Stainless Steel Joint Elbow (Inch G Series) 6.35 x 3.96 mm PT1/4 L-14G-PT14-SUS | L-14G-PT14-SUS | 1piece | JPY: 2,266 | USD: 14.20 |
|
|
 |
67-2257-90 | Stainless Steel Joint Elbow (Inch G Series) 3.18 x 1.65 mm PT1/4 L-18G-PT14-SUS | L-18G-PT14-SUS | 1piece | JPY: 2,900 | USD: 18.18 |
|
|
 |
67-2259-95 | Stainless Steel Joint Elbow (Inch G Series) 6.35 x 3.96 mm PT1/8 L-14G-PT18-SUS | L-14G-PT18-SUS | 1piece | JPY: 2,175 | USD: 13.63 |
|
|
 |
67-2260-25 | Stainless Steel Joint Elbow (Inch G Series) 3.18 x 1.65 mm PT1/8 L-18G-PT18-SUS | L-18G-PT18-SUS | 1piece | JPY: 2,629 | USD: 16.48 |
|