65-9584-35 Diameter of Pulled Object of Gear Puller D (mm): 60~150 Width of Pulled Object t (mm): 60 (When D is Maximum) Nail Reach Length H (mm): 135 GT150S
คุณลักษณะ
- Since the claw is closed by the force of the spring, it is easy to set on the drawing object and workability is outstanding. In addition, GL type long claws can be attached to further expand the range of use.
ข้อมูลจําเพาะ
- Diameter of object to be drawn D (mm): 60~150
- Width of the drawn object t (mm): 60 (when D is maximum)
- Nail Length H (mm): 135
- Claw Tip Thickness S (mm): 5.3
- Male Thread Hexagon Opposite Side B (mm): 22
- External Diameter of Male Thread (mm): 22
- Breaking Load (kN): 75
- Mass (kg): 3.4
| หมายเลขใบสั่ง | 65-9584-35 | |
|---|---|---|
| หมายเลขแบบจําลอง | GT150S | |
| รหัส JAN | 4967521316804 | |
| ราคามาตรฐาน |
JPY: 17,260
USD: 108.19
Excange rate 1USD= 159.53JPY
Valid price in Japan |
|
| ปริมาณ | 1piece | |
| หุ้นในประเทศญี่ปุ่น |
|
|
| หุ้นซัพพลายเออร์ |
|
|
ผลิตภัณฑ์ที่เกี่ยวข้อง (ขนาดที่แตกต่างกัน, ข้อมูลจําเพาะ,ผลิตภัณฑ์ตัวเลือก ฯลฯ)
| รูปภาพผลิตภัณฑ์ | หมายเลขใบสั่ง | ชื่อ | หมายเลขแบบจําลอง | ปริมาณ | ราคามาตรฐาน | ราคาที่ถูกต้องในประเทศญี่ปุ่น | หุ้น [หุ้นซัพพลายเออร์] |
|
|---|---|---|---|---|---|---|---|---|
 |
65-9584-31 | G Type Gear Puller Red G100S | G100S | 1piece | JPY: 7,510 | USD: 47.08 |
|
|
 |
65-9584-32 | G Type Gear Puller Orange G150S | G150S | 1piece | JPY: 11,370 | USD: 71.27 |
|
|
 |
65-9584-33 | G Type Gear Puller Blue G200S | G200S | 1piece | JPY: 24,360 | USD: 152.70 |
|
|
 |
65-9584-34 | Diameter of Pulled Object of Gear Puller D (mm): 50~100 Width of Pulled Object t (mm): 45 (When D is Maximum) Nail Reach Length H (mm): 80 GT100S | GT100S | 1piece | JPY: 10,150 | USD: 63.62 |
|
|
 |
65-9584-35 | Diameter of Pulled Object of Gear Puller D (mm): 60~150 Width of Pulled Object t (mm): 60 (When D is Maximum) Nail Reach Length H (mm): 135 GT150S | GT150S | 1piece | JPY: 17,260 | USD: 108.19 |
|
|
 |
65-9584-36 | Diameter of Pulled Object of Gear Puller D (mm): 80~200 Width of Pulled Object t (mm): 100 (When D is Maximum) Nail Reach Length H (mm): 225 GT200S | GT200S | 1piece | JPY: 34,510 | USD: 216.32 |
|
|
 |
65-9584-37 | Diameter of Pulled Object of Gear Puller D (mm): 80 (Minimum)/200 (Maximum) Width of Pulled Object t (mm): 100 (When D is Maximum) Length Reachable by Claw H (mm): 230 GT200 | GT200 | 1piece | JPY: 30,450 | USD: 190.87 |
|
|
 |
65-9584-38 | Gear Puller, Diameter of Pulled Object: 100 (Minimum)/250 (Maximum) Width of Pulled Object t (mm): 120 (When D is Maximum) Length Reachable by Claw H (mm): 245 GT250 | GT250 | 1piece | JPY: 45,680 | USD: 286.34 |
|
|
 |
65-9584-66 | Diameter of Pulled Object of Gear Puller D (mm): 40~90 Adapter Outer Diameter d (mm): 16 Length Reachable by Claw H (mm): 70 ABT90 | ABT90 | 1piece | JPY: 17,230 | USD: 108.01 |
|
|
 |
65-9584-72 | Diameter of Pulled Object of Gear Puller D (mm): 120 (Minimum)/300 (Maximum) Width of Pulled Object t (mm): 125 (When D is Maximum) Length Reachable by Claw H (mm): 275 GT12 | GT12 | 1piece | JPY: 92,220 | USD: 578.07 |
|
|
 |
65-9584-73 | Diameter of Pulled Object of Gear Puller D (mm): 150 (Minimum)/375 (Maximum) Width of Pulled Object t (mm): 130 (When D is Maximum) Length Reachable by Claw H (mm): 320 GT15 | GT15 | 1piece | JPY: 133,550 | USD: 837.15 |
|
|
 |
65-9584-74 | Diameter of Pulled Object of Gear Puller D (mm): 180 (Minimum)/450 (Maximum) Width of Pulled Object t (mm): 140 (When D is Maximum) Length Reachable by Claw H (mm): 370 GT18 | GT18 | 1piece | JPY: 165,300 | USD: 1,036.17 |
|
|
 |
65-9588-57 | Diameter of Pulled Object of Gear Puller D (mm): 40 (Minimum)/75 (Maximum) Width of Pulled Object t (mm): 30 (When D is Maximum) Length Reachable by Claw H (mm): 55 G3 | G3 | 1piece | JPY: 5,450 | USD: 34.16 |
|
|
 |
65-9588-58 | Diameter of Pulled Object of Gear Puller D (mm): 50 (Minimum)/100 (Maximum) Width of Pulled Object t (mm): 45 (When D is Maximum) Length Reachable by Claw H (mm): 100 G4 | G4 | 1piece | JPY: 7,450 | USD: 46.70 |
|
|
 |
65-9588-59 | Diameter of Pulled Object of Gear Puller D (mm): 60 (Minimum)/150 (Maximum) Width of Pulled Object t (mm): 60 (When D is Maximum) Length Reachable by Claw H (mm): 150 G6 | G6 | 1piece | JPY: 11,370 | USD: 71.27 |
|
|
 |
65-9588-60 | Diameter of Pulled Object of Gear Puller D (mm): 80 (Minimum)/200 (Maximum) Width of Pulled Object t (mm): 100 (When D is Maximum) Length Reachable by Claw H (mm): 240 G8 | G8 | 1piece | JPY: 24,490 | USD: 153.51 |
|
|
 |
65-9588-61 | Diameter of Pulled Object of Gear Puller D (mm): 100 (Minimum)/250 (Maximum) Width of Pulled Object t (mm): 120 (When D is Maximum) Length Reachable by Claw H (mm): 250 G10 | G10 | 1piece | JPY: 44,520 | USD: 279.07 |
|
|
 |
65-9588-62 | Diameter of Pulled Object of Gear Puller D (mm): 120 (Minimum)/300 (Maximum) Width of Pulled Object t (mm): 125 (When D is Maximum) Length Reachable by Claw H (mm): 275 G12 | G12 | 1piece | JPY: 56,830 | USD: 356.23 |
|
|
 |
65-9588-63 | Diameter of Pulled Object of Gear Puller D (mm): 150 (Minimum)/375 (Maximum) Width of Pulled Object t (mm): 130 (When D is Maximum) Length Reachable by Claw H (mm): 320 G15 | G15 | 1piece | JPY: 110,030 | USD: 689.71 |
|
|
 |
65-9588-95 | Diameter of Pulled Object of Gear Puller D (mm): 180 (Minimum)/450 (Maximum) Width of Pulled Object t (mm): 140 (When D is Maximum) Length Reachable by Claw H (mm): 370 G18 | G18 | 1piece | JPY: 132,600 | USD: 831.19 |
|
|
 |
65-9588-96 | Diameter of Pulled Object of Gear Puller D (mm): 50 (Minimum)/100 (Maximum) Width of Pulled Object t (mm): 60 (When D is Maximum) Length Reachable by Claw H (mm): 150 GL4 | GL4 | 1piece | JPY: 13,170 | USD: 82.56 |
|
|
 |
65-9588-97 | Diameter of Pulled Object of Gear Puller D (mm): 60 (Minimum)/150 (Maximum) Width of Pulled Object t (mm): 70 (When D is Maximum) Length Reachable by Claw H (mm): 190 GL6 | GL6 | 1piece | JPY: 18,550 | USD: 116.28 |
|
|
 |
65-9588-98 | Diameter of Pulled Object of Gear Puller D (mm): 80 (Minimum)/200 (Maximum) Width of Pulled Object t (mm): 100 (When D is Maximum) Length Reachable by Claw H (mm): 275 GL8 | GL8 | 1piece | JPY: 37,670 | USD: 236.13 |
|
|
 |
65-9588-99 | Diameter of Pulled Object of Gear Puller D (mm): 100 (Minimum)/250 (Maximum) Width of Pulled Object t (mm): 125 (When D is Maximum) Length Reachable by Claw H (mm): 300 GL10 | GL10 | 1piece | JPY: 61,200 | USD: 383.63 |
|
|
 |
65-9589-01 | Diameter of Pulled Object of Gear Puller D (mm): 120 (Minimum)/300 (Maximum) Width of Pulled Object t (mm): 170 (When D is Maximum) Length Reachable by Claw H (mm): 350 GL12 | GL12 | 1piece | JPY: 80,550 | USD: 504.92 |
|
|
 |
65-9589-02 | Diameter of Pulled Object of Gear Puller D (mm): 150 (Minimum)/375 (Maximum) Width of Pulled Object t (mm): 185 (When D is Maximum) Length Reachable by Claw H (mm): 400 GL15 | GL15 | 1piece | JPY: 132,750 | USD: 832.13 |
|
|
 |
65-9589-03 | Diameter of Pulled Object of Gear Puller D (mm): 180 (Minimum)/450 (Maximum) Width of Pulled Object t (mm): 200 (When D is Maximum) Length Reachable by Claw H (mm): 440 GL18 | GL18 | 1piece | JPY: 162,880 | USD: 1,021.00 |
|
|
 |
65-9591-46 | Diameter of Pulled Object of Gear Puller D (mm): 40~90 Adapter Outer Diameter d (mm): 16 Length Reachable by Claw H (mm): 100 ABT90L | ABT90L | 1piece | JPY: 18,020 | USD: 112.96 |
|
