65-5819-06 Breather Cap Outer Diameter 42 mm Thickness 36.5 BM-34G
คุณลักษณะ
- The ventilation structure allows air to enter and exit freely even with the cap attached.
- Even if a large pressure difference occurs temporarily in the tank due to a sudden temperature rise or backlash of oil, it is safe because it immediately regains equilibrium with the outside air. Suitable for use with pressure boosters and pressure reducers where the amount of oil increases or decreases drastically.
- Since the oil splashing is guarded by the special inclined blade inside, there is no external oil leakage under general operating conditions. In addition, air filters are built into the vents, so there is no need to worry about environmental pollution caused by oil fumes.
ข้อมูลจําเพาะ
- Outer Diameter (mm): 42
- Thickness (mm): 36.5
- Thread Dimensions: G3/4
- Thread length (mm): 11.5
- Thread Diameter: G3/4
- Cap: Polyamide Orange
- Screw Part: Polyamide Black
- Air Filter: Galvanized Iron Wire (SWMGS-1)
- Level Gauge: SUM22L Galvanized
- Packing: Nitrile Rubber (NBR)
- Avoid using it in a water tank because the resin absorbs water and expands.
- You cannot use gasoline or alcohol.
- Mass: 42 g
- Country of Origin: Italy
- Securities Code: 805-5653
| หมายเลขใบสั่ง | 65-5819-06 | |
|---|---|---|
| หมายเลขแบบจําลอง | BM-34G | |
| รหัส JAN | 4995889011482 | |
| ราคามาตรฐาน |
JPY: 1,550
USD: 9.64
Excange rate 1USD= 160.72JPY
Valid price in Japan |
|
| ปริมาณ | 1piece | |
| หุ้นในประเทศญี่ปุ่น |
|
|
| หุ้นซัพพลายเออร์ |
|
|
ผลิตภัณฑ์ที่เกี่ยวข้อง (ขนาดที่แตกต่างกัน, ข้อมูลจําเพาะ,ผลิตภัณฑ์ตัวเลือก ฯลฯ)
| รูปภาพผลิตภัณฑ์ | หมายเลขใบสั่ง | ชื่อ | หมายเลขแบบจําลอง | ปริมาณ | ราคามาตรฐาน | ราคาที่ถูกต้องในประเทศญี่ปุ่น | หุ้น [หุ้นซัพพลายเออร์] |
|
|---|---|---|---|---|---|---|---|---|
![]() |
65-5819-05 | Breather Cap Outer Diameter 42 mm Thickness 36.5 BM-1G | BM-1G | 1piece | JPY: 1,720 | USD: 10.70 |
|
|
![]() |
65-5819-06 | Breather Cap Outer Diameter 42 mm Thickness 36.5 BM-34G | BM-34G | 1piece | JPY: 1,550 | USD: 9.64 |
|


