AS ONE AS ONE

ผลิตภัณฑ์ : 3 มิลิออน สินค้า
วิธีใช้
Cách sử dụng
ติดต่อเรา
UNION TOOL CO.

65-2019-01　Carbide 2 Flute Tapered Neck Ball End Mill, R 0.75 x Neck Length 16 x Neck Taper Angle 2 degrees x Blade Length 1.2 x Total Length 60　HTNB2015-160-4

คุณลักษณะ

  • High rigidity is realized by adopting a tapered neck shape.
  • Even in deep carving, stable machining and high-quality machined surfaces have been achieved.
  • Uses HARDMAX coat that maintains high levels of heat resistance, toughness, and lubrication.
  • 65HRC high hardness material can also be cut.
  • Applicable Work Materials: Quenched Steel (~55HRC) (~60HRC) (~65HRC), Pre-Hardened Steel, Copper, Carbon Steel, Alloy Steel, Cast Iron, Titanium Alloy, Super Heat-Resistant Alloy
  • Shank Taper Angle is a guide.
  • If it is necessary to interfere with the work, be sure to measure and confirm.
  • Be careful of contact between the shank and the workpiece.

ข้อมูลจําเพาะ

  • Ball radius (mm): R 0.75
  • Blade length (mm): 1.2
  • Total length (mm): 60
  • Shank diameter (mm): 4
  • Length Under Neck (mm): 16
  • Number of blades: 2
  • Helix angle: 30
  • Surface treatment: HARDMAX
  • Surface treatment: HM coating
  • Helix angle 30 degrees
  • Material/Finish: Ultrafine Grain Alloy (Super MG)
  • Mass: 10 g
  • Country of origin: Japan
  • Securities Code: 250 -4424
  •  
หมายเลขใบสั่ง 65-2019-01
หมายเลขแบบจําลอง HTNB2015-160-4
รหัส JAN 4560295115705
ราคามาตรฐาน JPY: 7,020 USD: 44.00
Excange rate 1USD= 159.53JPY
Valid price in Japan
ปริมาณ 1piece
หุ้นในประเทศญี่ปุ่น
หุ้นซัพพลายเออร์

ผลิตภัณฑ์ที่เกี่ยวข้อง (ขนาดที่แตกต่างกัน, ข้อมูลจําเพาะ,ผลิตภัณฑ์ตัวเลือก ฯลฯ)

รูปภาพผลิตภัณฑ์ หมายเลขใบสั่ง ชื่อ หมายเลขแบบจําลอง ปริมาณ ราคามาตรฐาน ราคาที่ถูกต้องในประเทศญี่ปุ่น หุ้น
[หุ้นซัพพลายเออร์]
65-2018-70 Carbide 2-Flute Tapered Neck Ball End Mill, R 0.3 x 8 Neck Length x 2 Neck Taper Angle x 0.48 Blade Length x Total Length 50　HTNB2006-080-4 HTNB2006-080-4 1piece JPY: 6,923 USD: 43.40

65-2018-71 Carbide 2 Flute Tapered Neck Ball End Mill, R 0.3 x 8 Neck Length x 3 Neck Taper Angle x 0.48 Blade Length x Total Length 50　HTNB2006-080-6 HTNB2006-080-6 1piece JPY: 6,923 USD: 43.40

65-2018-72 Carbide 2 Flute Tapered Neck Ball End Mill, R 0.3 x Neck Length 12 x Neck Taper Angle 5 degrees x Blade Length 0.48 x Total Length 50　HTNB2006-120-10 HTNB2006-120-10 1piece JPY: 7,605 USD: 47.67

65-2018-73 Carbide 2 Flute Tapered Neck Ball End Mill, R 0.3 x Neck Length 12 x Neck Taper Angle 2 degrees x Blade Length 0.48 x Total Length 50　HTNB2006-120-4 HTNB2006-120-4 1piece JPY: 7,605 USD: 47.67

65-2018-74 Carbide 2 Flute Tapered Neck Ball End Mill, R 0.3 x Neck Length 12 x Neck Taper Angle 3 degrees x Blade Length 0.48 x Total Length 50　HTNB2006-120-6 HTNB2006-120-6 1piece JPY: 7,605 USD: 47.67

65-2018-75 Carbide 2 Flute Tapered Neck Ball End Mill, R 0.3 x Neck Length 14 x Neck Taper Angle 30 "x Blade Length 0.48 x Total Length 50　HTNB2006-140-1 HTNB2006-140-1 1piece JPY: 7,605 USD: 47.67

65-2018-76 Carbide 2 Flute Tapered Neck Ball End Mill, R 0.3 x Neck Length 14 x Neck Taper Angle 1 degree 30 "x Blade Length 0.48 x Total Length 50　HTNB2006-140-3 HTNB2006-140-3 1piece JPY: 7,605 USD: 47.67

65-2018-77 Carbide 2 Flute Tapered Neck Ball End Mill, R 0.3 x Neck Length 20 x Neck Taper Angle 5 degrees x Blade Length 0.48 x Total Length 50　HTNB2006-200-10 HTNB2006-200-10 1piece JPY: 10,156 USD: 63.66

65-2018-78 Carbide 2 Flute Tapered Neck Ball End Mill, R 0.3 x Neck Length 20 x Neck Taper Angle 1 degree 30 "x Blade Length 0.48 x Total Length 50　HTNB2006-200-3 HTNB2006-200-3 1piece JPY: 10,156 USD: 63.66

65-2018-79 Carbide 2 Flute Tapered Neck Ball End Mill, R 0.3 x Neck Length 20 x Neck Taper Angle 2 degrees x Blade Length 0.48 x Total Length 50　HTNB2006-200-4 HTNB2006-200-4 1piece JPY: 10,156 USD: 63.66

65-2018-80 Carbide 2 Flute Tapered Neck Ball End Mill, R 0.3 x Neck Length 20 x Neck Taper Angle 3 degrees x Blade Length 0.48 x Total Length 50　HTNB2006-200-6 HTNB2006-200-6 1piece JPY: 10,156 USD: 63.66

65-2018-81 Carbide 2 Flute Tapered Neck Ball End Mill, R 0.5 x Neck Length 12 x Neck Taper Angle 5 degrees x Blade Length 0.8 x Total Length 50　HTNB2010-120-10 HTNB2010-120-10 1piece JPY: 6,143 USD: 38.51

65-2018-82 Carbide 2 Flute Tapered Neck Ball End Mill, R 0.5 x Neck Length 12 x Neck Taper Angle 2 degrees x Blade Length 0.8 x Total Length 50　HTNB2010-120-4 HTNB2010-120-4 1piece JPY: 6,143 USD: 38.51

65-2018-83 Carbide 2 Flute Tapered Neck Ball End Mill, R 0.5 x Neck Length 12 x Neck Taper Angle 3 degrees x Blade Length 0.8 x Total Length 50　HTNB2010-120-6 HTNB2010-120-6 1piece JPY: 6,143 USD: 38.51

65-2018-84 Carbide 2 Flute Tapered Neck Ball End Mill, R 0.5 x Neck Length 14 x Neck Taper Angle 30 "x Blade Length 0.8 x Total Length 50　HTNB2010-140-1 HTNB2010-140-1 1piece JPY: 6,143 USD: 38.51

65-2018-85 Carbide 2 Flute Tapered Neck Ball End Mill, R 0.5 x Neck Length 14 x Neck Taper Angle 1 degree 30 "x Blade Length 0.8 x Total Length 50　HTNB2010-140-3 HTNB2010-140-3 1piece JPY: 6,143 USD: 38.51

65-2018-86 Carbide 2 Flute Tapered Neck Ball End Mill, R 0.5 x Neck Length 16 x Neck Taper Angle 2 degrees x Blade Length 0.8 x Total Length 50　HTNB2010-160-4 HTNB2010-160-4 1piece JPY: 6,143 USD: 38.51

65-2018-87 Carbide 2 Flute Tapered Neck Ball End Mill, R 0.5 x Neck Length 16 x Neck Taper Angle 3 degrees x Blade Length 0.8 x Total Length 50　HTNB2010-160-6 HTNB2010-160-6 1piece JPY: 6,143 USD: 38.51

65-2018-88 Carbide 2 Flute Tapered Neck Ball End Mill, R 0.5 x Neck Length 18 x Neck Taper Angle 30 "x Blade Length 0.8 x Total Length 50　HTNB2010-180-1 HTNB2010-180-1 1piece JPY: 6,143 USD: 38.51

65-2018-89 Carbide 2 Flute Tapered Neck Ball End Mill, R 0.5 x Neck Length 18 x Neck Taper Angle 1 degree 30 "x Blade Length 0.8 x Total Length 50　HTNB2010-180-3 HTNB2010-180-3 1piece JPY: 6,143 USD: 38.51

65-2018-90 Carbide 2 Flute Tapered Neck Ball End Mill, R 0.5 x Neck Length 20 x Neck Taper Angle 5 degrees x Blade Length 0.8 x Total Length 70　HTNB2010-200-10 HTNB2010-200-10 1piece JPY: 7,800 USD: 48.89

65-2018-91 Carbide 2 Flute Tapered Neck Ball End Mill, R 0.5 x Neck Length 20 x Neck Taper Angle 2 degrees x Blade Length 0.8 x Total Length 60　HTNB2010-200-4 HTNB2010-200-4 1piece JPY: 7,800 USD: 48.89

65-2018-92 Carbide 2 Flute Tapered Neck Ball End Mill, R 0.5 x Neck Length 20 x Neck Taper Angle 3 degrees x Blade Length 0.8 x Total Length 60　HTNB2010-200-6 HTNB2010-200-6 1piece JPY: 7,800 USD: 48.89

65-2018-93 Carbide 2 Flute Tapered Neck Ball End Mill, R 0.5 x Neck Length 29.8 x Neck Taper Angle 3 degrees x Blade Length 0.8 x Total Length 70　HTNB2010-298-6 HTNB2010-298-6 1piece JPY: 8,580 USD: 53.78

65-2018-94 Carbide 2 Flute Tapered Neck Ball End Mill, R 0.5 x Neck Length 30 x Neck Taper Angle 30 "x Blade Length 0.8 x Total Length 70　HTNB2010-300-1 HTNB2010-300-1 1piece JPY: 8,580 USD: 53.78

65-2018-95 Carbide 2 Flute Tapered Neck Ball End Mill, R 0.5 x Neck Length 30 x Neck Taper Angle 1 degree x Blade Length 0.8 x Total Length 70　HTNB2010-300-2 HTNB2010-300-2 1piece JPY: 8,580 USD: 53.78

65-2018-96 Carbide 2 Flute Tapered Neck Ball End Mill, R 0.5 x Neck Length 30 x Neck Taper Angle 1 degree 30 "x Blade Length 0.8 x Total Length 70　HTNB2010-300-3 HTNB2010-300-3 1piece JPY: 8,580 USD: 53.78

65-2018-97 Carbide 2 Flute Tapered Neck Ball End Mill, R 0.5 x Neck Length 30 x Neck Taper Angle 2 degrees x Blade Length 0.8 x Total Length 70　HTNB2010-300-4 HTNB2010-300-4 1piece JPY: 8,580 USD: 53.78

65-2018-98 Carbide 2 Flute Tapered Neck Ball End Mill, R 0.75 x Neck Length 12 x Neck Taper Angle 2 degrees x Blade Length 1.2 x Total Length 60　HTNB2015-120-4 HTNB2015-120-4 1piece JPY: 6,435 USD: 40.34

65-2018-99 Carbide 2 Flute Tapered Neck Ball End Mill, R 0.75 x Neck Length 12 x Neck Taper Angle 3 degrees x Blade Length 1.2 x Total Length 60　HTNB2015-120-6 HTNB2015-120-6 1piece JPY: 6,435 USD: 40.34

65-2019-01 Carbide 2 Flute Tapered Neck Ball End Mill, R 0.75 x Neck Length 16 x Neck Taper Angle 2 degrees x Blade Length 1.2 x Total Length 60　HTNB2015-160-4 HTNB2015-160-4 1piece JPY: 7,020 USD: 44.00

65-2019-02 Carbide 2 Flute Tapered Neck Ball End Mill, R 0.75 x Neck Length 16 x Neck Taper Angle 3 degrees x Blade Length 1.2 x Total Length 60　HTNB2015-160-6 HTNB2015-160-6 1piece JPY: 7,020 USD: 44.00

65-2019-03 Carbide 2 Flute Tapered Neck Ball End Mill, R 0.75 x Neck Length 20 x Neck Taper Angle 2 degrees x Blade Length 1.2 x Total Length 60　HTNB2015-200-4 HTNB2015-200-4 1piece JPY: 7,020 USD: 44.00

65-2019-04 Carbide 2 Flute Tapered Neck Ball End Mill, R 0.75 x Neck Length 20 x Neck Taper Angle 3 degrees x Blade Length 1.2 x Total Length 60　HTNB2015-200-6 HTNB2015-200-6 1piece JPY: 7,020 USD: 44.00

65-2019-05 Carbide 2 Flute Tapered Neck Ball End Mill, R 0.75 x Neck Length 30 x Neck Taper Angle 2 degrees x Blade Length 1.2 x Total Length 70　HTNB2015-300-4 HTNB2015-300-4 1piece JPY: 8,970 USD: 56.23

65-2019-06 Carbide 2 Flute Tapered Neck Ball End Mill, R 0.75 x Neck Length 30 x Neck Taper Angle 3 degrees x Blade Length 1.2 x Total Length 70　HTNB2015-300-6 HTNB2015-300-6 1piece JPY: 8,970 USD: 56.23

65-2019-07 Carbide 2-Flute Tapered Neck Ball End Mill, R1 x Under-Neck Length 10 x Neck Taper Angle 1 degrees 30 "x Blade Length 1.6 x Total Length 60　HTNB2020-100-3 HTNB2020-100-3 1piece JPY: 6,581 USD: 41.25

65-2019-08 Carbide 2-Flute Tapered Neck Ball End Mill, R1 x 12 Neck Length x 2 Neck Taper Angle x 1.6 Blade Length x Total Length 60　HTNB2020-120-4 HTNB2020-120-4 1piece JPY: 6,581 USD: 41.25

65-2019-09 Carbide 2-Flute Tapered Neck Ball End Mill, R1 x 12 Neck Length x 3 Neck Taper Angle x 1.6 Blade Length x Total Length 60　HTNB2020-120-6 HTNB2020-120-6 1piece JPY: 6,581 USD: 41.25

65-2019-10 Carbide 2-Flute Tapered Neck Ball End Mill, R1 x 16 Neck Length x 2 Neck Taper Angle x 1.6 Blade Length x Total Length 60　HTNB2020-160-4 HTNB2020-160-4 1piece JPY: 6,581 USD: 41.25

65-2019-11 Carbide 2-Flute Tapered Neck Ball End Mill, R1 x 16 Neck Length x 3 Neck Taper Angle x 1.6 Blade Length x Total Length 60　HTNB2020-160-6 HTNB2020-160-6 1piece JPY: 6,581 USD: 41.25

65-2019-12 Carbide 2-Flute Tapered Neck Ball End Mill, R1 x 20 Neck Length x 2 Neck Taper Angle x 1.6 Blade Length x Total Length 60　HTNB2020-200-4 HTNB2020-200-4 1piece JPY: 7,020 USD: 44.00

65-2019-13 Carbide 2-Flute Tapered Neck Ball End Mill, R1 x 20 Neck Length x 3 Neck Taper Angle x 1.6 Blade Length x Total Length 60　HTNB2020-200-6 HTNB2020-200-6 1piece JPY: 7,020 USD: 44.00

65-2019-14 Carbide 2-Flute Tapered Neck Ball End Mill, R1 x 30 Neck Length x 2 Neck Taper Angle x 1.6 Blade Length x Total Length 70　HTNB2020-300-4 HTNB2020-300-4 1piece JPY: 9,295 USD: 58.27

65-2019-15 Carbide 2-Flute Tapered Neck Ball End Mill, R1 x 30 Neck Length x 3 Neck Taper Angle x 1.6 Blade Length x Total Length 70　HTNB2020-300-6 HTNB2020-300-6 1piece JPY: 9,295 USD: 58.27

65-2019-16 Carbide 2-Flute Tapered Neck Ball End Mill, R1 x 40 Neck Length x 2 Neck Taper Angle x 1.6 Blade Length x Total Length 80　HTNB2020-400-4 HTNB2020-400-4 1piece JPY: 11,359 USD: 71.20

65-2019-17 Carbide 2-Flute Tapered Neck Ball End Mill, R1 x 40 Neck Length x 3 Neck Taper Angle x 1.6 Blade Length x Total Length 80　HTNB2020-400-6 HTNB2020-400-6 1piece JPY: 11,359 USD: 71.20

65-2019-18 Carbide 2-Flute Tapered Neck Ball End Mill, R2 x Neck Length 60 x Neck Taper Angle 1 degree 30 "x Blade Length 3.2 x Total Length 120　HTNB2040-600-3 HTNB2040-600-3 1piece JPY: 22,750 USD: 142.61

หน้านี้เป็นหน้าของ Carbide 2 Flute Tapered Neck Ball End Mill, R 0.75 x Neck Length 16 x Neck Taper Angle 2 degrees x Blade Length 1.2 x Total Length 60 ที่ขายโดย AS ONE CORPORATION AXEL GLOBAL คือเว็บไซต์ที่แสดงรายการผลิตภัณฑ์กว่า 3 ล้านชิ้นที่ใช้ในหลากหลายสาขา ซึ่งรวมถึงการวิจัยและการพัฒนา การผลิต การสารกึ่งตัวนํา การแพทย์ การดูแลทางการพยาบาล และสุขาภิบาลด้านอาหาร