65-0254-05 Torque Wrench for Motorsports 10~70 N/m with Manufacturer Calibration Certificate + Tolerability System Diagram MTQL70N
คุณลักษณะ
- This product comes with a set of the manufacturer's calibration certificate (including inspection data) and a traceability system diagram.
- Supports wide range tightening.
- Beautiful surface treatment. The grip part is knurled to make it easy to wipe off oil.
- When the set torque is reached, the toggle is activated and the completion of tightening can be sensed with a light and clean signal sound.
- Head ratchet is effective for tightening in narrow places with 24 pieces and 15 degree swing width.
- The torque can be easily changed by the scale.
- All models come with a resin hard case. [Application]
- race bicycle
- motor cycle
- Motor vehicle torque management, general use [Precautions]
- A calibration certificate prepared by the manufacturer based on the inspection data at the time of manufacturing is included as standard.
- Cancellation or return after order is not allowed.
ข้อมูลจําเพาะ
- Torque Adjustment Range [N · m] (Minimum to Maximum): 10~70
- Torque Adjustment Range [N · m] (1 Scale): 1
- Dimensions [mm] (total length): 285
- Dimension [mm] (square drive): 9.53
- Mass about [kg]: 0.47
| หมายเลขใบสั่ง | 65-0254-05 | |
|---|---|---|
| หมายเลขแบบจําลอง | MTQL70N | |
| ราคามาตรฐาน |
JPY: 33,900
USD: 212.50
Excange rate 1USD= 159.53JPY
Valid price in Japan |
|
| ปริมาณ | 1piece | |
| หุ้นในประเทศญี่ปุ่น |
|
|
| หุ้นซัพพลายเออร์ |
|
|
ผลิตภัณฑ์ที่เกี่ยวข้อง (ขนาดที่แตกต่างกัน, ข้อมูลจําเพาะ,ผลิตภัณฑ์ตัวเลือก ฯลฯ)
| รูปภาพผลิตภัณฑ์ | หมายเลขใบสั่ง | ชื่อ | หมายเลขแบบจําลอง | ปริมาณ | ราคามาตรฐาน | ราคาที่ถูกต้องในประเทศญี่ปุ่น | หุ้น [หุ้นซัพพลายเออร์] |
|
|---|---|---|---|---|---|---|---|---|
![]() |
65-0254-03 | Torque Wrench for Motorsports 20~140 N/m with Manufacturer Calibration Certificate + Tolerability System Diagram MTQL140N | MTQL140N |
|
1piece | JPY: 40,600 | USD: 254.50 |
|
![]() |
65-0254-04 | Torque Wrench for Motorsports 5~40 N/m with Manufacturer Calibration Certificate + Tolerability System Diagram MTQL40N | MTQL40N |
|
1piece | JPY: 31,500 | USD: 197.46 |
|
![]() |
65-0254-05 | Torque Wrench for Motorsports 10~70 N/m with Manufacturer Calibration Certificate + Tolerability System Diagram MTQL70N | MTQL70N |
|
1piece | JPY: 33,900 | USD: 212.50 |
|
ผลิตภัณฑ์ที่เกี่ยวข้อง
1 / 1 ページ




