64-8559-06 ［Discontinued］HM Coated 2-Flute Long Neck Ball for High Hardness R2 x Effective Length 32 x Blade Length 3.2 x Shank Diameter 6 HSLB2040-320
คุณลักษณะ
- High-hardness mold material processing of 40HRC or higher achieves machining efficiency, longer life and higher quality machining surface than before.
- Uses HARDMAX coat that maintains high levels of heat resistance, toughness, and lubrication.
- Stable machining is possible for both water-soluble and oily cutting oil, oil mist and air blow.
- Set the rake angle of the ball tip to negative to improve the wear resistance and improve the machining dimension.
- Set the rake angle on the outer periphery side of the ball to a weak negative to ensure sharpness and prevent good processing surface and toppling.
- Shank taper angle is a guide.
- If it is necessary to interfere with the work, be sure to measure and confirm.
- Be careful of contact between the shank and the workpiece.
ข้อมูลจําเพาะ
- Ball radius (mm): R2
- Number of blades: 2
- Blade length (mm): 3.2
- Total length (mm): 80
- Shank diameter (mm): 6
- Surface treatment: HARDMAX COAT
- Compatible Work Materials: Prehardened Steel, Quenched Steel (55 HRC) (60 HRC) (70 HRC), Carbon Steel, Alloy Steel, Cast Iron, Copper, Titanium Alloy, Super Heat Resistant Alloy
- Material/Finish: Super MG
- Country of origin: Japan
- Securities Code: 195 -3086
| หมายเลขใบสั่ง | 64-8559-06 | |
|---|---|---|
| หมายเลขแบบจําลอง | HSLB2040-320 | |
| รหัส JAN | 4560295107854 | |
| ราคามาตรฐาน |
JPY: 5,469
USD: 34.28
Excange rate 1USD= 159.53JPY
Valid price in Japan |
|
| ปริมาณ | 1piece | |
|
||
| หุ้นในประเทศญี่ปุ่น | - | |
ผลิตภัณฑ์ที่เกี่ยวข้อง (ขนาดที่แตกต่างกัน, ข้อมูลจําเพาะ,ผลิตภัณฑ์ตัวเลือก ฯลฯ)
| รูปภาพผลิตภัณฑ์ | หมายเลขใบสั่ง | ชื่อ | หมายเลขแบบจําลอง | ปริมาณ | ราคามาตรฐาน | ราคาที่ถูกต้องในประเทศญี่ปุ่น | หุ้น [หุ้นซัพพลายเออร์] |
|
|---|---|---|---|---|---|---|---|---|
 |
64-8557-92 | ［Discontinued］HM Coated 2-Flute Long Neck Ball for High Hardness R 1.5 x Effective Length 27 x Blade Length 2.4 x Shank Diameter 6 HSLB2030-270 | HSLB2030-270 | 1piece | JPY: 4,543 | USD: 28.48 |
-
|
|
 |
64-8557-93 | ［Discontinued］HM Coated 2-Flute Long Neck Ball for High Hardness R 1.5 x Effective Length 32 x Blade Length 2.4 x Shank Diameter 6 HSLB2030-320 | HSLB2030-320 | 1piece | JPY: 6,574 | USD: 41.21 |
-
|
|
 |
64-8558-73 | ［Discontinued］HM Coated 2-Flute Long Neck Ball for High Hardness R 0.1 x Effective Length 1.5 x Blade Length 0.16 x Shank Diameter 6 HSLB2002-015-6 | HSLB2002-015-6 | 1piece | JPY: 9,954 | USD: 62.40 |
-
|
|
 |
64-8558-74 | ［Discontinued］HM Coated 2-Flute Long Neck Ball for High Hardness R 0.1 x Effective Length 2 x Blade Length 0.16 x Shank Diameter 6 HSLB2002-020-6 | HSLB2002-020-6 | 1piece | JPY: 10,985 | USD: 68.86 |
-
|
|
 |
64-8558-89 | ［Discontinued］HM Coated 2-Flute Long Neck Ball for High Hardness R1 x Effective Length 27 x Blade Length 1.6 x Shank Diameter 4 HSLB2020-270 | HSLB2020-270 | 1piece | JPY: 4,908 | USD: 30.77 |
-
|
|
 |
64-8558-90 | ［Discontinued］HM Coated 2-Flute Long Neck Ball for High Hardness R1 x Effective Length 32 x Blade Length 1.6 x Shank Diameter 4 HSLB2020-320 | HSLB2020-320 | 1piece | JPY: 5,558 | USD: 34.84 |
-
|
|
 |
64-8558-91 | ［Discontinued］HM Coated 2-Flute Long Neck Ball for High Hardness R 1.5 x Effective Length 18 x Blade Length 2.4 x Shank Diameter 6 HSLB2030-180 | HSLB2030-180 | 1piece | JPY: 4,721 | USD: 29.59 |
-
|
|
 |
64-8558-92 | ［Discontinued］HM Coated 2-Flute Long Neck Ball for High Hardness R 1.5 x Effective Length 22 x Blade Length 2.4 x Shank Diameter 6 HSLB2030-220 | HSLB2030-220 | 1piece | JPY: 4,543 | USD: 28.48 |
-
|
|
 |
64-8559-03 | ［Discontinued］HM Coated 2-Flute Long Neck Ball for High Hardness R2 x Effective Length 18 x Blade Length 3.2 x Shank Diameter 6 HSLB2040-180 | HSLB2040-180 | 1piece | JPY: 4,721 | USD: 29.59 |
-
|
|
 |
64-8559-04 | ［Discontinued］HM Coated 2-Flute Long Neck Ball for High Hardness R2 x Effective Length 22 x Blade Length 3.2 x Shank Diameter 6 HSLB2040-220 | HSLB2040-220 | 1piece | JPY: 4,721 | USD: 29.59 |
-
|
|
 |
64-8559-05 | ［Discontinued］HM Coated 2-Flute Long Neck Ball for High Hardness R2 x Effective Length 27 x Blade Length 3.2 x Shank Diameter 6 HSLB2040-270 | HSLB2040-270 | 1piece | JPY: 4,721 | USD: 29.59 |
-
|
|
 |
64-8559-06 | ［Discontinued］HM Coated 2-Flute Long Neck Ball for High Hardness R2 x Effective Length 32 x Blade Length 3.2 x Shank Diameter 6 HSLB2040-320 | HSLB2040-320 | 1piece | JPY: 5,469 | USD: 34.28 |
-
|
|
 |
64-8559-07 | ［Discontinued］HM Coated 2-Flute Long Neck Ball for High Hardness R 3 x Effective Length 18 x Blade Length 4.8 x Shank Diameter 6 HSLB2060-180 | HSLB2060-180 | 1piece | JPY: 5,931 | USD: 37.18 |
-
|
|
 |
64-8559-08 | ［Discontinued］HM Coated 2-Flute Long Neck Ball for High Hardness R 3 x Effective Length 22 x Blade Length 4.8 x Shank Diameter 6 HSLB2060-220 | HSLB2060-220 | 1piece | JPY: 5,931 | USD: 37.18 |
-
|
|
 |
64-8559-09 | ［Discontinued］HM Coated 2-Flute Long Neck Ball for High Hardness R 3 x Effective Length 27 x Blade Length 4.8 x Shank Diameter 6 HSLB2060-270 | HSLB2060-270 | 1piece | JPY: 5,931 | USD: 37.18 |
-
|
|
 |
64-8559-10 | ［Discontinued］HM Coated 2-Flute Long Neck Ball for High Hardness R 3 x Effective Length 32 x Blade Length 4.8 x Shank Diameter 6 HSLB2060-320 | HSLB2060-320 | 1piece | JPY: 6,110 | USD: 38.30 |
-
|