64-8487-71 DLC Coated 3-Flute Ball End Mill, DLC-CFB R2 x Blade Length 6 x Total Length 70 x Shank Diameter 6 DLC-CFB3040-0600
คุณลักษณะ
- With 3 blades, it has an amazing high feed rate.
- Roughing time has been reduced.
- The use of DLC provides excellent adhesion and abrasion resistance.
- Since it can be deeply inserted, high-efficiency machining is possible even for shape machining that cannot increase the feed speed.
- Suppresses chattering by unequal division of 3 blades.
- Excellent chip expulsion and excellent finished surface roughness are realized by the three-groove shape of the tip.
- (Excluding R0.75 and below)
- Applicable Work Materials: Aluminum Alloy, Copper, Resin
ข้อมูลจําเพาะ
- Ball radius (mm): R2
- Blade length (mm): 6
- Total length (mm): 70
- Shank diameter (mm): 6
- Number of blades: 3
- Surface treatment: DLC
- Surface treatment: DLC
- For 3-Flute DLC Aluminum Machining
- Manufactured at factories with ISO 9001 certification
- Manufactured at factories with ISO 14001 certification
- Material/Finish:
- SuperMG
- Note:
- Shank taper angle is a guide.
- If you are concerned about interference with the work, make sure to measure and check.
- The tool outside diameter may be smaller than the shank diameter.
- Be careful of contact between the shank and the work piece.
- Country of origin: Japan
- Securities Code: 149 -4066
| หมายเลขใบสั่ง | 64-8487-71 | |
|---|---|---|
| หมายเลขแบบจําลอง | DLC-CFB3040-0600 | |
| รหัส JAN | 4560295102989 | |
| ราคามาตรฐาน |
JPY: 5,866
USD: 36.77
Excange rate 1USD= 159.53JPY
Valid price in Japan |
|
| ปริมาณ | 1piece | |
| หุ้นในประเทศญี่ปุ่น |
|
|
| หุ้นซัพพลายเออร์ |
|
|
ผลิตภัณฑ์ที่เกี่ยวข้อง (ขนาดที่แตกต่างกัน, ข้อมูลจําเพาะ,ผลิตภัณฑ์ตัวเลือก ฯลฯ)
| รูปภาพผลิตภัณฑ์ | หมายเลขใบสั่ง | ชื่อ | หมายเลขแบบจําลอง | ปริมาณ | ราคามาตรฐาน | ราคาที่ถูกต้องในประเทศญี่ปุ่น | หุ้น [หุ้นซัพพลายเออร์] |
|
|---|---|---|---|---|---|---|---|---|
 |
64-8487-65 | DLC Coated 3-Flute Ball End Mill, DLC-CFB R 0.3 x Blade Length 0.9 x Total Length 50 x Shank Diameter 4 DLC-CFB3006-0090 | DLC-CFB3006-0090 | 1piece | JPY: 5,866 | USD: 36.77 |
|
|
 |
64-8487-66 | DLC Coated 3-Flute Ball End Mill, DLC-CFB R 0.4 x Blade Length 1.2 x Total Length 50 x Shank Diameter 4 DLC-CFB3008-0120 | DLC-CFB3008-0120 | 1piece | JPY: 5,720 | USD: 35.86 |
|
|
 |
64-8487-67 | DLC Coated 3-Flute Ball End Mill, DLC-CFB R 0.5 x Blade Length 1.5 x Total Length 50 x Shank Diameter 4 DLC-CFB3010-0150 | DLC-CFB3010-0150 | 1piece | JPY: 5,314 | USD: 33.31 |
|
|
 |
64-8487-68 | DLC Coated 3-Flute Ball End Mill, DLC-CFB R 0.75 x Blade Length 2.25 x Total Length 50 x Shank Diameter 4 DLC-CFB3015-0225 | DLC-CFB3015-0225 | 1piece | JPY: 5,866 | USD: 36.77 |
|
|
 |
64-8487-69 | DLC Coated 3-Flute Ball End Mill, DLC-CFB R1 x Blade Length 3 x Total Length 50 x Shank Diameter 4 DLC-CFB3020-0300 | DLC-CFB3020-0300 | 1piece | JPY: 5,720 | USD: 35.86 |
|
|
 |
64-8487-70 | DLC Coated 3-Flute Ball End Mill, DLC-CFB R 1.5 x Blade Length 4.5 x Total Length 60 x Shank Diameter 6 DLC-CFB3030-0450 | DLC-CFB3030-0450 | 1piece | JPY: 5,866 | USD: 36.77 |
|
|
 |
64-8487-71 | DLC Coated 3-Flute Ball End Mill, DLC-CFB R2 x Blade Length 6 x Total Length 70 x Shank Diameter 6 DLC-CFB3040-0600 | DLC-CFB3040-0600 | 1piece | JPY: 5,866 | USD: 36.77 |
|
|
 |
64-8487-72 | DLC Coated 3-Flute Ball End Mill, DLC-CFB R2 x Blade Length 6 x Total Length 70 x Shank Diameter 4 DLC-CFB3040-0600-4 | DLC-CFB3040-0600-4 | 1piece | JPY: 5,590 | USD: 35.04 |
|
|
 |
64-8487-73 | DLC Coated 3-Flute Ball End Mill, DLC-CFB R 2.5 x Blade Length 7.5 x Total Length 80 x Shank Diameter 6 DLC-CFB3050-0750 | DLC-CFB3050-0750 | 1piece | JPY: 6,639 | USD: 41.62 |
|
|
 |
64-8487-74 | DLC Coated 3-Flute Ball End Mill, DLC-CFB R3 x Blade Length 9 x Total Length 80 x Shank Diameter 6 DLC-CFB3060-0900 | DLC-CFB3060-0900 | 1piece | JPY: 7,338 | USD: 46.00 |
|
|
 |
64-8487-75 | DLC Coated 3-Flute Ball End Mill, DLC-CFB R4 x Blade Length 12 x Total Length 90 x Shank Diameter 8 DLC-CFB3080-1200 | DLC-CFB3080-1200 | 1piece | JPY: 10,481 | USD: 65.70 |
|
|
 |
64-8487-76 | DLC Coated 3-Flute Ball End Mill, DLC-CFB R4 x Blade Length 12 x Total Length 120 x Shank Diameter 8 DLC-CFB3080-1200LS | DLC-CFB3080-1200LS | 1piece | JPY: 11,863 | USD: 74.36 |
|
|
 |
64-8487-77 | DLC Coated 3-Flute Ball End Mill, DLC-CFB R5 x Blade Length 15 x Total Length 100 x Shank Diameter 10 DLC-CFB3100-1500 | DLC-CFB3100-1500 | 1piece | JPY: 13,894 | USD: 87.09 |
|
|
 |
64-8487-78 | DLC Coated 3-Flute Ball End Mill, DLC-CFB R6 x Blade Length 18 x Total Length 110 x Shank Diameter 12 DLC-CFB3120-1800 | DLC-CFB3120-1800 | 1piece | JPY: 17,550 | USD: 110.01 |
|