คุณลักษณะ

• This product is a set of a calibration certificate, inspection report, and tresability system chart which were calibrated by the manufacturer.
• It is the most commonly used caliper.
• It comes with a scale level that prevents dust from entering between the main scale and the slider.
• The slope of the vernier scale is loose (14°), making it easy to read.
• Since the head end face of the main scale and slider is set as the zero base point (measurement plane), step measurement is possible. In addition to measuring outside, inside, and depth, standard calipers can measure steps and four types of measurements.
• The cemented carbide with chips is ideal for measuring rough work, castings, grinding wheels, etc.
• [Notes]
• We will also produce the maximum measurement length of 200 mm and 300 mm with the inner and outer measurement surface carbide tip by order.
• * 2 Partial measurement surface contact error EMPE/scale shift error SMPE Terminology in JIS B 7507:2016 revised based on ISO 13385-1:2011 (notation). The measurement method is the same as the previous one.
• You will need a document address (company name and address) for your order.