คุณลักษณะ

• This product is a high-resolution, high-precision digital thermometer with JCSS calibration documents. * The calibration technology section of the Miyagi Plant of Sato Metering Instruments Co., Ltd. uses ISO/IEC 17025 as the certification standard, and the certification scheme is certified under JCSS, which operates in accordance with ISO/IEC 17011. JCSS0110 is the certification number of this calibration technical division. The Accreditation Agency (IAJapan) that operates the JCSS is a signatory to the mutual recognition of the Asia-Pacific Accreditation Cooperation (APAC) and the International Association for Laboratory Accreditation (ILAC).
• A calibration certificate with the JCSS logo and 2 documents of the calibration result are included as a set. * Calibration points are -40,0, 20°C.
• Although it is a handy-type digital thermometer, the high resolution display of 0.01°C in the entire measurement range of -100°C to +360°C and the combination with a high-performance sensor has achieved the highest overall accuracy of ±0.16°C. *The measurement range of the supplied low temperature sensor is -100~50°C. Other sensors for medium temperature (0~200°C) and high temperature (150~360°C) are available separately.
• Platinum temperature measuring resistor Pt100 (4 wire type) is used for the sensor part, and it shows its power even in the low temperature range where high precision temperature measurement was difficult until now.
• Rich arithmetic and HOLD functions. Intuitive key placement. In addition to the current temperature display, the maximum (MAX), minimum (MIN), relative (REL) and moving average (AVG) values can be calculated and displayed. By using the HOLD function, the measured value can be easily read even when the temperature of the object to be measured is not stable.
• Both functionality, durability and design. Even when placed on a desk, the display is tilted approximately 7 degrees, and the large number segments greatly improve visibility and visibility.
• Wall hooks do not interfere with the design because of the structure they pull out when used on walls. The neck strap hole is installed on the bottom of the case.
• The case protection packing on the outer periphery of the indicator minimizes case breakage when the indicator falls.
• Highly waterproof indicator (JIS C0920 IPX7 compliant). The indicator has high waterproof performance with the sensor firmly connected.　Even if you touch it with wet hands or it gets wet, there is no problem in its function.
• Can be measured for about 1,000 hours using an alkaline battery. Though the usable time varies in the measurement environment, it can be measured for a long time with four AAA alkaline batteries.
• Note: Japanese battery manufacturers prohibit the use of rechargeable Ni-MH batteries in sealed devices. Use a non-rechargeable manganese or alkaline battery.