IKA

63-5534-68-22　Stirrer with Pre-shipment Inspection Document　Eurostar400control

พิมพ์

ตรวจสอบชุดข้อมูล

English

หน่วยสาธิต

คุณลักษณะ

Eurostar 400 control high viscosity agitator with a wireless remote controller with easy-to-read digital TFT display.
Can stir up to 150 L (vs. H20).
Electronically controlled agitator with speed range 0/6 -2000rpm (2 speed ranges).
Equipped with RS232 and USB interface, all parameters can be recorded and operated via PC. (Requires separate software)
Since the torque trend can be displayed, the viscosity change of the sample can be checked.
Equipped with a safety circuit, automatically stops when excessive load is applied to the stirrer.
Even if the viscosity changes during stirring, the set rotation speed is maintained so that the actual rotation speed can be controlled automatically.
Multilingual TFT display
Program settings can be saved
Temperature measurable
Equipped with interval function to reduce agitation unevenness.
Timer function equipped
Configurable Protection
Equipped with a lock function
Rotation speed is stepless control
The stirring blade is chuck type and easy to remove.
Equipped with overload prevention function.
For High Viscosity, Allows for Concentrated Stirring Work
Motor part is compact design
quiet drive
The error code is displayed digitally.
H 67.60 Temperature Sensor, WH 11 WiCo Holder (Standard Included)

ข้อมูลจําเพาะ

Maximum throughput (vs. H2O) (L): 150
Motor power (W): 220
Motor input (W): 176
Main engine: brushless DC
Speed display: TFT
Speed range (rpm): 0/6 to 2000
Reverse rotation: no
Intermittent operation: yes
Maximum viscosity (mPas): 100,000
Maximum power of stirring shaft (W): 167
Continuous Usage (%): 100
Maximum torque of agitating shaft (Ncm): 400
Maximum torque (gear I) (Ncm): 400
Maximum torque (gear II) (Ncm): 80
Speed range I (50 Hz) (rpm): 6~400
Speed range II (50 Hz) (rpm): 30~2000
Speed range I: minimum speed (60 Hz) (rpm): 6
Speed range I: Maximum speed (60 Hz) (rpm): 400
Speed range I: minimum speed (60 Hz) (rpm): 30
Speed range II: Maximum speed (60 Hz) (rpm): 2000
Speed control: Stepless
Accurate speed setting (+/- rpm): 1
Speed measurement error (n>300rpm) (+/-%): 1
Speed measurement error (n<300rpm) (±rpm): 3
Stirring Blade Fastener: Chuck
Temperature Sensor Mounting Connector: PT1000
Temperature display: yes
Fittings mounted (O) (mm): 10
Chuck Range (mm): 0.5~10
Shaft through hole diameter (mm): 10.3
Push-through-when stopped: yes
Stand Mounting: Extension Arm
Diameter of support arm (mm): 16
Length of support arm (mm): 160
Torque display: yes
Speed control: electronic
Normal torque (Nm): 4
torque measurement: trends
Torque error (gear I) (+/- Ncm): 40
Speed measurement error (gear II) (+/- Ncm): 12
Timer: yes
timer display: TFT
Timer setting range (min): 1~6000
Temperature Measurement Range (°C): -10 to +350
Temperature measurement (K): 0.1
Temperature measurement error (K): error ±0.05 PT1000 (DIN IEC 751 Class A)
Allowable deviation value (temperature sensor) (K): ≤ ± (0.15+0.002xITI)
Housing Material: Aluminum Cast Coating/Thermoplastic Polymer
Certified for use in clean rooms: no
Explosion-Proof Specifications: no
Maximum range (depends on the building environment) (m): 150
Body Dimensions (W x H x D) (mm): 114 x 345 x 268
Weight (kg): 8.2
Allowable ambient temperature (deg. C): 5~40
Permissible Ambient Humidity (%): 80
DIN EN 60529 Standard Protection Class: IP40
USB interface: yes
RS 232 interface: yes
Analog output: no
Voltage (V): 230
Frequency (Hz): 50/60
Output: 226
Inspection items: actual measured speed, timer operation (display accuracy ±3rpm at 300 rpm), temperature (display accuracy ±0.5°C)
Stand-compatible models
R 2722, R 2723(Supported Boss Head Clamps: R 270, R 271)
Stirring Blade Compatible Models: R 1342 (1-7327-01), R 1345 (4-2399-01), R 2302 (1-3152-03), R 1381 (1-3152-11), R 1382 (1-3152-07), R 1385 (1-3731-13), R 1388 (1-3731-14), R 1389 (61-0005-43), R 1311 (61-0005-36), R 1312 (1-7327-02), R 1313 (61-0005-37), R 1352 (1-3152-04), R 1302 (1-7327-03), R 1303 (61-0005-62), R 1375 (1-7327-04), R 1376 (1-3731-16), R 2311 (1-3731-17), R 1330 (1-3152-09), R 1331 (1-7327-05), R 1333 (1-3731-18), R 3000.1 (63-1288-95), R 3001.1 (63-1288-96), R -11 (1382 1342 -7327), R 1345 (-2399 2302 -3152), R 1381 (-3152 61 -43), R -3152 (1385 -3731-01), R -13 (1388 -3731-02), R -14 (1389 1352 -03), R -3152 (1 1311 61), R -36 (1 1312 -01)
< a href="https://axel.as-1.co.jp/asone/keyword/?q=EUROSTAR%E7%94%A8%E3%82%A2%E3%82%AF%E3%82%BB%E3%82%B5%E3%83%AA" rel="noopener nofollow" target="_blank" > Click here for adaptive accessories. < /a >

หมายเลขใบสั่ง	63-5534-68-22
หมายเลขแบบจําลอง	Eurostar400control
รหัส JAN	4582619713343
ราคามาตรฐาน	JPY: 822,000 USD: 5,152.64 Excange rate 1USD= 159.53JPY Valid price in Japan
ปริมาณ	1piece
หุ้นในประเทศญี่ปุ่น
หุ้นซัพพลายเออร์

ผลิตภัณฑ์ที่เกี่ยวข้อง (ขนาดที่แตกต่างกัน, ข้อมูลจําเพาะ,ผลิตภัณฑ์ตัวเลือก ฯลฯ)

รูปภาพผลิตภัณฑ์	หมายเลขใบสั่ง	ชื่อ	หมายเลขแบบจําลอง		ปริมาณ	ราคามาตรฐาน	ราคาที่ถูกต้องในประเทศญี่ปุ่น	หุ้น [หุ้นซัพพลายเออร์]
	63-5534-67-22	Stirrer with Pre-shipment Inspection Document　Eurostar400digital	Eurostar400digital		1piece	JPY: 708,000	USD: 4,438.04
	63-5534-68-22	Stirrer with Pre-shipment Inspection Document　Eurostar400control	Eurostar400control		1piece	JPY: 822,000	USD: 5,152.64

ผลิตภัณฑ์ที่เกี่ยวข้อง

1 / 1 ページ