ELECOM CO., LTD

63-2996-64 [เลิกผลิตแล้ว]ซีโรช็อก คาราบีเนอร์ คากี สําหรับ iPhone XS PM-A18BZEROKKH

คุณลักษณะ

  • A ZEROSHOCK carabiner case for iPhone XS with a 2-way carabiner that attaches to the center or bottom of the case.
  • By attaching the carabiner to the center of the case, you can prevent it from falling through your fingers like a finger ring.
  • By attaching the carabiner to the bottom of the case, it can be hung and carried.
  • * Cannot be used for climbing or other applications where strong force is applied.
  • It has a dual structure of TPU material and PC material that is resistant to impact and uses dual structure to protect the body from scratches and impact.
  • Corner bumpers that absorb shock are installed at the corners where the greatest damage is expected when falling.
  • A honeycomb structure with high shock absorption efficiency is adopted on the inside of the case where the back of the main body contacts.
  • The convex bezel prevents scratches and damage to the LCD screen.
  • Comes with a shock absorbing film that protects the LCD screen from scratches and dirt with a 3-layer film that mitigates impact.
  • The film is an airless type that uses a special adsorption layer that reduces the appearance of air bubbles over time.
  • The film is a self-adsorbing type with a silicon coating on the sticking surface. Since no adhesive or double-sided tape is used, it can be easily applied and reapplied without contaminating the body.
  • With the case attached, you can check the LCD screen, operate the unit, and connect charging and communication cables.
  • It has a strap hole for attaching a fall prevention strap. *The product does not come with a strap.
  • It has passed the drop test from 1.22 m in compliance with MIL standard. (However, no damage or failure is guaranteed in all conditions.)

ข้อมูลจําเพาะ

  • แบบจําลองที่เข้ากันได้: iPhone XS, iPhone X
  • ตั้งค่าเนื้อหา: เนื้อหาของกรณี x 1, Liquid Crystal Protection Film (การดูดซึมของผลกระทบ) x 1
  • วัสดุ: กรณีและผู้ป่วย/TPU (เทอร์โมพลาสติกโพลียูรีเทน), โพลีคาร์บอเนต, คาราไบเนอร์/ซิงค์ อัลลอย
  • สี: คากิ
  • วัสดุของฟิล์ม: PET, Polyurethane (ภาพพื้นผิว/ซิลิคอนแบบดูด)
  •  

ขนาดแพ็คเกจ:110×30×195 mm   [เกี่ยวกับขนาดแพ็คเกจ]

หมายเลขใบสั่ง 63-2996-64
หมายเลขแบบจําลอง PM-A18BZEROKKH
รหัส JAN 4549550113670
ราคามาตรฐาน JPY: 4,550 USD: 28.52
Excange rate 1USD= 159.53JPY
Valid price in Japan
ปริมาณ 1piece
  เลิกผลิตแล้ว
หุ้นในประเทศญี่ปุ่น -

ผลิตภัณฑ์ที่เกี่ยวข้อง (ขนาดที่แตกต่างกัน, ข้อมูลจําเพาะ,ผลิตภัณฑ์ตัวเลือก ฯลฯ)

รูปภาพผลิตภัณฑ์ หมายเลขใบสั่ง ชื่อ หมายเลขแบบจําลอง ปริมาณ ราคามาตรฐาน ราคาที่ถูกต้องในประเทศญี่ปุ่น หุ้น
[หุ้นซัพพลายเออร์]
63-2996-63 [เลิกผลิตแล้ว]ซีโรช็อก คาราบิเนอร์ แบล็กสําหรับ iPhone XS PM-A18BZEROKBK PM-A18BZEROKBK 1piece JPY: 4,550 USD: 28.52

-

63-2996-64 [เลิกผลิตแล้ว]ซีโรช็อก คาราบีเนอร์ คากี สําหรับ iPhone XS PM-A18BZEROKKH PM-A18BZEROKKH 1piece JPY: 4,550 USD: 28.52

-

63-2996-65 [เลิกผลิตแล้ว]กองทัพเรือ Zeroshock Carabiner สําหรับ iPhone XS PM-A18BZEROKNV PM-A18BZEROKNV 1piece JPY: 4,550 USD: 28.52

-

63-2996-66 [เลิกผลิตแล้ว]ซีโรช็อค คาราบิเนอร์ เรด สําหรับ iPhone XS PM-A18BZEROKRD PM-A18BZEROKRD 1piece JPY: 4,550 USD: 28.52

-

63-2996-67 [เลิกผลิตแล้ว]ซีโรช็อก คาราไบเนอร์ เหลือง สําหรับ iPhone XS PM-A18BZEROKYL PM-A18BZEROKYL 1piece JPY: 4,550 USD: 28.52

-