Cytiva (Whatman)

62-6178-50 Polycap TF36 (0.2 μm) (Inlet/Outlet: 1/2 "SB) 6710-3602

คุณลักษณะ

  • Solvent resistance with PTFE filters
  • Recommended for organic solvents and erosive solutions
  • Capsule type filters with the smallest pore size (5 types of 0.05, 0.1, 0.2, 0.45, 1.0 μm)
  • Sterilization with autoclave or ethylene oxide gas is possible. Integrity testing is possible.
  • Note)Only for test and research purposes.

ข้อมูลจําเพาะ

  • Housing: Polypropylene
  • Membrane Material: Polytetrafluoroethylene
  • vents: inlet side
  • Support System: Polypropylene
  • Connection Method: Heat Crimping
  • Voltage: 0.41 MPa (60psi)
  • Filtration direction: with bidirectional support. Only one direction depending on the application due to venting. Reverse filtration is possible only at low pressure.
  • Sterilization: Unsterilized/Autoclavable at 121°C for 20 minutes (maximum temperature 132°C). It is possible to autoclave repeatedly, but use at the user's responsibility to avoid cross contamination. Perform the integrity test after autoclaving. Sterilization with ethylene oxide gas is possible.
  • Effective Filtration Area: 500 cm2
  • IPA Bubble Point: > 0.09 MPa (13psi)
  • Pore Diameter (μm): 0.2
  • Connection Inlet: 1/2 "SB
  • Connection Outlet: 1/2 "SB
  • 1/2 "SB = Stepped Hose Port: Can be Connected to 10~12 mm (3/8" -1/2 ") Tubes
  •  

ขนาดแพ็คเกจ:70×70×123 mm 110 g  [เกี่ยวกับขนาดแพ็คเกจ]

หมายเลขใบสั่ง 62-6178-50
หมายเลขแบบจําลอง 6710-3602
ราคามาตรฐาน JPY: 14,740 USD: 91.71
Excange rate 1USD= 160.72JPY
Valid price in Japan
ปริมาณ 1piece
หุ้นในประเทศญี่ปุ่น
หุ้นซัพพลายเออร์

ผลิตภัณฑ์ที่เกี่ยวข้อง (ขนาดที่แตกต่างกัน, ข้อมูลจําเพาะ,ผลิตภัณฑ์ตัวเลือก ฯลฯ)

รูปภาพผลิตภัณฑ์ หมายเลขใบสั่ง ชื่อ หมายเลขแบบจําลอง ปริมาณ ราคามาตรฐาน ราคาที่ถูกต้องในประเทศญี่ปุ่น หุ้น
[หุ้นซัพพลายเออร์]
62-6178-23 Polycap TF36 (0.2 μm) (Inlet/Outlet: SB) 6700-3602 6700-3602 1piece JPY: 13,640 USD: 84.87

62-6178-50 Polycap TF36 (0.2 μm) (Inlet/Outlet: 1/2 "SB) 6710-3602 6710-3602 1piece JPY: 14,740 USD: 91.71