61-9661-80 [เลิกผลิตแล้ว]เครื่องทํากรดคาร์โบนิก IT600
คุณลักษณะ
- The inner tank has a seamless, flat structural design. All corners are marked with R, and the four corners at the back of the inner tank have a ball corner structure that prevents contamination and is easy to clean.
- The possibility of contamination is suppressed by slight air stirring only when CO2 is introduced, and the internal gas phase is made uniform. The fan also automatically stops when the door is opened. There is no vibration.
- A temperature sensor is installed in the inner tank to control the temperature so that the temperature in the inner tank is not affected even if the outside air temperature fluctuates.
- The information is displayed on the display so that you can easily see the operating status of the device and the operating conditions under which it is running.
- The size of the inner tank was designed with ease of petri dish installation in mind. The optional tray for petri dishes can be installed efficiently, and the tray can be installed efficiently on the shelf board of the main unit for easy removal.
- There is no drain in the tank, and no wastewater treatment is required.
- Shelf receiver unit can be removed.
- Detaching the fan in the tank is easy without using tools. It is also easy to disassemble and assemble ducts in the tank, shelf receptacles, etc.
- The structure makes it easy to replace the fan motor, temperature sensor and concentration sensor.
- An overheat prevention mechanism that automatically sets the temperature to +2°C in accordance with the set temperature and an independent excess rise prevention device are provided as standard equipment. The temperature sensor and CO2 sensor are monitored to stop temperature control only in case of temperature abnormality, and to stop CO2 control only in case of CO2 concentration abnormality.
- In the event of a power failure, samples are maintained by a heat-insulating structure with a well-insulated water jacket and a mechanism to stop the supply of CO2.
- Note If a sample that generates heat is placed in the device, the temperature may not be controlled normally.
ข้อมูลจําเพาะ
- วิธีทําความร้อน: แจ็กเก็ตน้ํา
- ระบบความชื้น: การระเหยด้วยค้างคาว
- ระบบควบคุมความเข้มข้น CO2: การควบคุมการตรวจจับเซนเซอร์ CO2
- ระบบการอ้างอิง: หายใจด้วยกระแสลมหมุนเวียนจากพัดลมไฟฟ้า
- ช่วงอุณหภูมิแวดล้อม: 5 - 30 ℃
- ช่วงอุณหภูมิในการทํางาน: อุณหภูมิห้อง +5 - 50 ℃
- ช่วงความชื้นของการใช้: 95%R.H. หรือมากกว่า
- ช่วงการควบคุมความเข้มข้น CO2: 0.1 - 20.0%
- ความถูกต้องของการควบคุมอุณหภูมิ: +/- 0.1 ℃ (ที่ 37 ℃)
- ความแม่นยําของการกระจายอุณหภูมิ: +/- 0.2 ℃ (ที่ 37 ℃)
- ความถูกต้องของการควบคุมความเข้มข้นของ CO2: +/- 0.1% (ที่ 5% CO2)
- ขนาดรถถังภายใน (ความกว้าง x ความลึก x ความสูง มม.): 609 x 426 x 514
- ขนาดภายนอก (ความกว้าง x ความลึก x ความสูง) (มม.): 745 x 646 x 905 *ไม่รวมการแปล
- กําลังการผลิตภายใน (ประมาณ): 133แอล
- กําลังการผลิตบอร์ดชั้นวาง: 5 กก./ชีท หรือมากกว่า
- จํานวนชั้นวาง: 14 ขั้น
- พลังงาน (50/60Hz): เอซี100วี
| หมายเลขใบสั่ง | 61-9661-80 | |
|---|---|---|
| หมายเลขแบบจําลอง | IT600 | |
| รหัส JAN | 4573181503906 | |
| ราคามาตรฐาน |
JPY: 1,050,000
USD: 6,581.83
Excange rate 1USD= 159.53JPY
Valid price in Japan |
|
| ปริมาณ | 1piece | |
|
|
||
| หุ้นในประเทศญี่ปุ่น | - | |
ผลิตภัณฑ์ที่เกี่ยวข้อง (ขนาดที่แตกต่างกัน, ข้อมูลจําเพาะ,ผลิตภัณฑ์ตัวเลือก ฯลฯ)
| รูปภาพผลิตภัณฑ์ | หมายเลขใบสั่ง | ชื่อ | หมายเลขแบบจําลอง |
Width (Frontage) |
Height |
ปริมาณ | ราคามาตรฐาน | ราคาที่ถูกต้องในประเทศญี่ปุ่น | หุ้น [หุ้นซัพพลายเออร์] |
|
|---|---|---|---|---|---|---|---|---|---|---|
![]() |
61-9661-80 | [เลิกผลิตแล้ว]เครื่องทํากรดคาร์โบนิก IT600 | IT600 | 745mm | 905mm | 1piece | JPY: 1,050,000 | USD: 6,581.83 |
-
|
|
![]() |
61-9661-78 | [เลิกผลิตแล้ว]เครื่องทํากรดคาร์โบนิก IT820 | IT820 | 745mm | 1811mm | 1piece | JPY: 1,900,000 | USD: 11,909.99 |
-
|
|
![]() |
61-9661-79 | [เลิกผลิตแล้ว]เครื่องทํากรดคาร์โบนิก IT400 | IT400 | 545mm | 805mm | 1piece | JPY: 850,000 | USD: 5,328.15 |
-
|
ผลิตภัณฑ์ที่เกี่ยวข้อง
1 / 1 ページ
![[เลิกผลิตแล้ว]เครื่องทํากรดคาร์โบนิก IT600](https://aimg.as-1.co.jp/c/61/9661/80/61966178.jpg?v=03790be0f2ba82c1280907a7033cf49dabaaa7c1)



![[เลิกผลิตแล้ว]เฟรมสําหรับ IT600 OIT12](https://www.axel-gl.com/en/asone/img/no_image.jpg?v=03790be0f2ba82c1280907a7033cf49dabaaa7c1)