คุณลักษณะ

• For the same type, the parallel accuracy is all within 0.01. (Standard parallel specification of all products)
• The winding type cutting powder cover reduces the amount of cutting powder that enters the body.
• The floating prevention mechanism prevents the work from floating.
• It is more accurate than the old JISO class.
• The sliding surface has excellent wear resistance due to flame quenching (HRC45).
• The body is made of dag-tile, so there is no sled or damage during tightening.
• The body and the fixing jaw are integrated and maintain high rigidity.
• The opening of the mouth is nearly twice as large as that of the same class of vise, and the large work can be tightened.
• It has a large mouth depth and can securely tighten even tall workpieces.
• It is equipped with a pressure replenishment mechanism as an emergency measure in case of pressure drop and does not interfere with operation.
• Cutting water and fine chips in the body can be discharged from the blow hole by the cutting powder blow mechanism.
• The mechanical type can also handle from the fixed cap side, and the LTCV-TH has a specification that handles from the fixed cap side with built-in hydraulic pressure. Since the fixed cap side is close to the worker, the distance of attaching and detaching the work is shortened, so the setting time can be shortened and the burden to the worker can be reduced.
• SJ type (LTCV-S, SH) is a standard type (LTCV, LTCV-H) cap replaced with a step cap.
• * Please refer to this section for accessories that can be attached to this vice. http://www.nabeya.co.jp/item/990.html
• Accessories: Standard Guide Block (2 x 1 Set) Applicable Groove Width 18 mm-1 Set Standard Mounting Clamp Set (2 x 1 Set) Applicable T Groove Width 18 mm-2 Set Handle -1 Lifting Tool -1 Type