คุณลักษณะ

• By redesigning the conventional kinematic mirror holder (MHG), we have achieved even lower prices.
• It is suitable for experiments using a large number of simple mirror holders and for incorporating mirror holders into mass production equipment.
• By reducing the thickness of the holder, it is possible to take more space for adjustment operation than MHG.
• The mirror side is held in place at three points so that the stress generated when the mirror is held in place can be adjusted.
• Since there is no restriction on the effective diameter due to the screw ring, a large effective diameter can be obtained with reflected or transmitted light.
• MHG-NL mirror holder with adjustment screw locking mechanism is also available.
• Can be attached to a post stand (PST: sold separately) or a rod (RO: sold separately) on the tip M6.
• * The mounting center of the rod is offset from the reflecting surface of the mirror.
• * This function cannot be used when the machine is installed on the optical bench at 45 degree incidence.
• * Use a mirror holder (MHI) with no offset.
• * The center of rotation of the fine adjustment is not aligned with the reflection plane of the mirror.
• * For fine measurement, use a gimbal mirror holder (MHAN) whose center of rotation is aligned with the reflection surface of the mirror.