61-6881-66 ผู้ใช้แบบ Beam Shaping φ52มม. 30 x 5° MDFPC-52-30/5D
คุณลักษณะ
- It has a higher transmittance than other diffusing plates, and it is possible to obtain diffuse light spread in one direction.
- It can be used for sheet light and laser marking devices used for fluid observation.
- Small lenses are randomly formed on the surface of the device. Each lens then diverges the beam into an ellipse. Therefore, light scattering or reflection in unrelated directions does not cause significant light loss.
- Since the same pattern of the ellipse is emitted no matter where in the plane of the element is irradiated, the optical axis adjustment like the lens is unnecessary.
- You can change the orientation of the ellipse by rotating the element.
- * This function can also be used with laser light, but light once scattered cannot be concentrated to a single point.
- * Do not use solvents other than alcohol or distilled water during cleaning.
- * The surface of the device is delicate, so do not press or rub hard objects.
- * Use lens cleaning paper soaked with alcohol on the surface of the device.
- * Do not use with a high-power laser or a high-energy pulsed laser because the element may deform or melt.
ข้อมูลจําเพาะ
- [ > แผ่นกระจายเสียงแบบบีม < ข้อมูลจําเพาะทั่วไป]
- วัสดุ: โพลีคาร์บอเนต
- ความหนาขององค์ประกอบ: ประมาณ 0.25 มม.
- ความยาวคลื่นที่ปรับได้: 400 - 1100nm
- การส่ง: 85 - 90% (แตกต่างกันขึ้นอยู่กับมุมการกระจาย)
- การยอมรับมุม: ± 15% (มุมเบี่ยงเบน < 10°), ± 1.5° (≦ 10°)
- ดัชนีที่ปฏิเสธ: 1.586
- [การระบุบุคคล]
- เส้นผ่านศูนย์กลางรอบ φD: φ52มม.
- φΑ: φ47มม.
- รูปวงรีสําหรับกระจายความยาวขนาดเส้นผ่านศูนย์กลาง x ขนาดสั้น: 30 x 5°
- ผลิตภัณฑ์สอดคล้องของ RoHS
| หมายเลขใบสั่ง | 61-6881-66 | |
|---|---|---|
| หมายเลขแบบจําลอง | MDFPC-52-30/5D | |
| ราคามาตรฐาน |
JPY: 11,000
USD: 69.00
Excange rate 1USD= 159.42JPY
Valid price in Japan |
|
| ปริมาณ | 1piece | |
| หุ้นในประเทศญี่ปุ่น |
|
|
| หุ้นซัพพลายเออร์ |
|
|
ผลิตภัณฑ์ที่เกี่ยวข้อง (ขนาดที่แตกต่างกัน, ข้อมูลจําเพาะ,ผลิตภัณฑ์ตัวเลือก ฯลฯ)
| รูปภาพผลิตภัณฑ์ | หมายเลขใบสั่ง | ชื่อ | หมายเลขแบบจําลอง | ปริมาณ | ราคามาตรฐาน | ราคาที่ถูกต้องในประเทศญี่ปุ่น | หุ้น [หุ้นซัพพลายเออร์] |
|
|---|---|---|---|---|---|---|---|---|
![]() |
61-6881-59 | ผู้ใช้แบบ Beam Shaping φ30มม. 60 x 10° MDFPC-30-60/10D | MDFPC-30-60/10D | 1piece | JPY: 9,900 | USD: 62.10 |
|
|
![]() |
61-6881-60 | ตัวแบ่งหน้าแบบบีม φ30 60 x 1° MDFPC-30-60/1D | MDFPC-30-60/1D | 1piece | JPY: 9,900 | USD: 62.10 |
|
|
![]() |
61-6881-62 | ผู้ใช้แบบ Beam Shaping φ30มม. 30 x 5° MDFPC-30-30/5D | MDFPC-30-30/5D | 1piece | JPY: 8,200 | USD: 51.44 |
|
|
![]() |
61-6881-63 | ผู้ใช้แบบ Beam Shaping φ52มม. 60 x 10° MDFPC-52-60/10D | MDFPC-52-60/10D | 1piece | JPY: 13,200 | USD: 82.80 |
|
|
![]() |
61-6881-64 | ตัวแบ่งหน้าแบบบีม φ52 60 x 1° MDFPC-52-60/1D | MDFPC-52-60/1D | 1piece | JPY: 13,200 | USD: 82.80 |
|
|
![]() |
61-6881-66 | ผู้ใช้แบบ Beam Shaping φ52มม. 30 x 5° MDFPC-52-30/5D | MDFPC-52-30/5D | 1piece | JPY: 11,000 | USD: 69.00 |
|
|
![]() |
61-6881-61 | [เลิกผลิตแล้ว]ผู้ใช้ Beam Shaping φ30 40 x 0 2 ° MDFPC-30-40/0.2D | MDFPC-30-40/0.2D | 1piece | JPY: 7,500 | USD: 47.05 |
-
|
|
![]() |
61-6881-65 | [เลิกผลิตแล้ว]ผู้ใช้ Beam Shaping φ52 40 x 0 2 ° MDFPC-52-40/0.2D | MDFPC-52-40/0.2D | 1piece | JPY: 10,000 | USD: 62.73 |
-
|











