61-1407-99 FX Hole Φ40 Cutter (mm) FX40
คุณลักษณะ
- The "Simple Joint System" is a one-touch detachable system.
- Various sizes of cutters can be used with one shank.
- Work Material: Stainless Steel, Steel Plate, Aluminum, Cast, Plywood, FRP, Metal Siding, Gypsum, PVC, etc.
ข้อมูลจําเพาะ
- ขนาดเบลด (มม.): 40
- ความลึกของอก (มม.): 32
- ขนาดเส้นผ่าศูนย์กลาง (มม.): 10
- ความหนาของเบลด (มม.): 3.1
- ความยาวที่มีผลบังคับใช้ (มม.): 13
- มวล (G): 280
- ความสามารถในการลดประสิทธิภาพ: แผ่นงานเหล็กไร้สี 7 มม. 13 มม. (เครื่องเจาะดูดที่ความหนา 25 มม.)
- ส่วนประกอบเบลด: เคล็ดลับเกี่ยวกับคาร์ไบด์ที่ถูกเน้น
- โปรแกรมประยุกต์: วัสดุสําหรับทํางาน: เหล็กกล้า เหล็กกล้า อลูมิเนียม แคสติ้ง ไม้อัด FRP เครื่องหมายโลหะ ยิปซัม และ PVC
- ประเทศที่มา: ญี่ปุ่น
- น้ําหนัก: 280 จี
- หมายเลขรุ่นของผู้ผลิต: เอฟเอ็กซ์40
- หมายเลขรหัส: 303-9544
ขนาดแพ็คเกจ：59×168×48 mm 270 g [เกี่ยวกับขนาดแพ็คเกจ]
| หมายเลขใบสั่ง | 61-1407-99 | |
|---|---|---|
| หมายเลขแบบจําลอง | FX40 | |
| รหัส JAN | 4993452310406 | |
| ราคามาตรฐาน |
JPY: 8,050
USD: 50.46
Excange rate 1USD= 159.53JPY
Valid price in Japan |
|
| ปริมาณ | 1piece | |
| หุ้นในประเทศญี่ปุ่น |
|
|
| หุ้นซัพพลายเออร์ |
|
|
ผลิตภัณฑ์ที่เกี่ยวข้อง (ขนาดที่แตกต่างกัน, ข้อมูลจําเพาะ,ผลิตภัณฑ์ตัวเลือก ฯลฯ)
| รูปภาพผลิตภัณฑ์ | หมายเลขใบสั่ง | ชื่อ | หมายเลขแบบจําลอง |
Product category 1 |
Product category 2 |
ปริมาณ | ราคามาตรฐาน | ราคาที่ถูกต้องในประเทศญี่ปุ่น | หุ้น [หุ้นซัพพลายเออร์] |
|
|---|---|---|---|---|---|---|---|---|---|---|
 |
61-1408-39 | การเจาะดูข้อมูลกึ่งกลาง (SJ สําหรับ FX / Hole Cutter) SJ690 | SJ690 | Center drill | Heiss | 1piece | JPY: 980 | USD: 6.14 |
|
|
 |
61-1408-08 | FX Hole Cutter (Split Blade, Φ15mm) FX15C | FX15C | Cutter only | Cemented carbide | 1piece | JPY: 3,450 | USD: 21.63 |
|
|
 |
61-1408-09 | FX Hole Cutter (Split Blade, Φ16mm) FX16C | FX16C | Cutter only | Cemented carbide | 1piece | JPY: 3,450 | USD: 21.63 |
|
|
 |
61-1408-10 | FX Hole Cutter (Split Blade, Φ17mm) FX17C | FX17C | Cutter only | Cemented carbide | 1piece | JPY: 3,450 | USD: 21.63 |
|
|
 |
61-1408-11 | FX Hole Cutter (Split Blade, Φ18mm) FX18C | FX18C | Cutter only | Cemented carbide | 1piece | JPY: 3,450 | USD: 21.63 |
|
|
 |
61-1408-12 | FX Hole Cutter (Split Blade, Φ19mm) FX19C | FX19C | Cutter only | Cemented carbide | 1piece | JPY: 3,450 | USD: 21.63 |
|
|
 |
61-1408-13 | FX Hole Cutter (Split Blade, Φ20mm) FX20C | FX20C | Cutter only | Cemented carbide | 1piece | JPY: 3,450 | USD: 21.63 |
|
|
 |
61-1408-14 | FX Hole Cutter (Split Blade, Φ21mm) FX21C | FX21C | Cutter only | Cemented carbide | 1piece | JPY: 3,450 | USD: 21.63 |
|
|
 |
61-1408-15 | FX Hole Cutter (Split Blade, Φ22mm) FX22C | FX22C | Cutter only | Cemented carbide | 1piece | JPY: 3,450 | USD: 21.63 |
|
|
 |
61-1408-16 | FX Hole Cutter (Split Blade, Φ23mm) FX23C | FX23C | Cutter only | Cemented carbide | 1piece | JPY: 3,450 | USD: 21.63 |
|
|
 |
61-1408-17 | FX Hole Cutter (Split Blade, Φ25mm) FX25C | FX25C | Cutter only | Cemented carbide | 1piece | JPY: 3,450 | USD: 21.63 |
|
|
 |
61-1408-18 | FX Hole Cutter (Split Blade, Φ27mm) FX27C | FX27C | Cutter only | Cemented carbide | 1piece | JPY: 3,738 | USD: 23.43 |
|
|
 |
61-1408-19 | FX Hole Cutter (Split Blade, Φ28mm) FX28C | FX28C | Cutter only | Cemented carbide | 1piece | JPY: 3,738 | USD: 23.43 |
|
|
 |
61-1408-20 | FX Hole Cutter (Split Blade, Φ30mm) FX30C | FX30C | Cutter only | Cemented carbide | 1piece | JPY: 3,738 | USD: 23.43 |
|
|
 |
61-1408-21 | FX Hole Cutter (Split Blade, Φ32mm) FX32C | FX32C | Cutter only | Cemented carbide | 1piece | JPY: 4,313 | USD: 27.04 |
|
|
 |
61-1408-22 | FX Hole Cutter (Split Blade, Φ33mm) FX33C | FX33C | Cutter only | Cemented carbide | 1piece | JPY: 4,313 | USD: 27.04 |
|
|
 |
61-1408-23 | FX Hole Cutter (Split Blade, Φ34mm) FX34C | FX34C | Cutter only | Cemented carbide | 1piece | JPY: 4,313 | USD: 27.04 |
|
|
 |
61-1408-24 | FX Hole Cutter (Split Blade, Φ35mm) FX35C | FX35C | Cutter only | Cemented carbide | 1piece | JPY: 4,313 | USD: 27.04 |
|
|
 |
61-1408-25 | FX Hole Cutter (Split Blade, Φ36mm) FX36C | FX36C | Cutter only | Cemented carbide | 1piece | JPY: 5,175 | USD: 32.44 |
|
|
 |
61-1408-26 | FX Hole Cutter (Split Blade, Φ38mm) FX38C | FX38C | Cutter only | Cemented carbide | 1piece | JPY: 5,175 | USD: 32.44 |
|
|
 |
61-1408-27 | FX Hole Cutter (Split Blade, Φ40mm) FX40C | FX40C | Cutter only | Cemented carbide | 1piece | JPY: 5,175 | USD: 32.44 |
|
|
 |
61-1408-28 | FX Hole Cutter (Split Blade, Φ42mm) FX42C | FX42C | Cutter only | Cemented carbide | 1piece | JPY: 5,175 | USD: 32.44 |
|
|
 |
61-1408-29 | FX Hole Cutter (Split Blade, Φ43mm) FX43C | FX43C | Cutter only | Cemented carbide | 1piece | JPY: 5,175 | USD: 32.44 |
|
|
 |
61-1408-30 | FX Hole Cutter (Split Blade, Φ45mm) FX45C | FX45C | Cutter only | Cemented carbide | 1piece | JPY: 5,175 | USD: 32.44 |
|
|
 |
61-1408-31 | FX Hole Cutter (Split Blade, Φ48mm) FX48C | FX48C | Cutter only | Cemented carbide | 1piece | JPY: 5,750 | USD: 36.04 |
|
|
 |
61-1408-32 | FX Hole Cutter (Split Blade, Φ50mm) FX50C | FX50C | Cutter only | Cemented carbide | 1piece | JPY: 5,750 | USD: 36.04 |
|
|
 |
61-1408-33 | FX Hole Cutter (Split Blade, Φ53mm) FX53C | FX53C | Cutter only | Cemented carbide | 1piece | JPY: 6,325 | USD: 39.65 |
|
|
 |
61-1408-34 | FX Hole Cutter (Split Blade, Φ55mm) FX55C | FX55C | Cutter only | Cemented carbide | 1piece | JPY: 6,325 | USD: 39.65 |
|
|
 |
61-1407-80 | FX Hole Φ15 Cutter (mm) FX15 | FX15 | Hall saw | Edge interchangeable,cemented carbide | 1piece | JPY: 6,325 | USD: 39.65 |
|
|
 |
61-1407-81 | FX Hole Φ16 Cutter (mm) FX16 | FX16 | Hall saw | Edge interchangeable,cemented carbide | 1piece | JPY: 6,325 | USD: 39.65 |
|
|
 |
61-1407-82 | FX Hole Φ17 Cutter (mm) FX17 | FX17 | Hall saw | Edge interchangeable,cemented carbide | 1piece | JPY: 6,325 | USD: 39.65 |
|
|
 |
61-1407-83 | FX Hole Φ18 Cutter (mm) FX18 | FX18 | Hall saw | Edge interchangeable,cemented carbide | 1piece | JPY: 6,325 | USD: 39.65 |
|
|
 |
61-1407-84 | FX Hole Φ19 Cutter (mm) FX19 | FX19 | Hall saw | Edge interchangeable,cemented carbide | 1piece | JPY: 6,325 | USD: 39.65 |
|
|
 |
61-1407-85 | FX Hole Φ20 Cutter (mm) FX20 | FX20 | Hall saw | Edge interchangeable,cemented carbide | 1piece | JPY: 6,325 | USD: 39.65 |
|
|
 |
61-1407-86 | FX Hole Φ21 Cutter (mm) FX21 | FX21 | Hall saw | Edge interchangeable,cemented carbide | 1piece | JPY: 6,325 | USD: 39.65 |
|
|
 |
61-1407-87 | FX Hole Φ22 Cutter (mm) FX22 | FX22 | Hall saw | Edge interchangeable,cemented carbide | 1piece | JPY: 6,325 | USD: 39.65 |
|
|
 |
61-1407-88 | FX Hole Φ23 Cutter (mm) FX23 | FX23 | Hall saw | Edge interchangeable,cemented carbide | 1piece | JPY: 6,325 | USD: 39.65 |
|
|
 |
61-1407-89 | FX Hole Φ25 Cutter (mm) FX25 | FX25 | Hall saw | Edge interchangeable,cemented carbide | 1piece | JPY: 6,325 | USD: 39.65 |
|
|
 |
61-1407-90 | FX Hole Φ27 Cutter (mm) FX27 | FX27 | Hall saw | Edge interchangeable,cemented carbide | 1piece | JPY: 6,613 | USD: 41.45 |
|
|
 |
61-1407-91 | FX Hole Φ28 Cutter (mm) FX28 | FX28 | Hall saw | Edge interchangeable,cemented carbide | 1piece | JPY: 6,613 | USD: 41.45 |
|
|
 |
61-1407-92 | FX Hole Φ30 Cutter (mm) FX30 | FX30 | Hall saw | Edge interchangeable,cemented carbide | 1piece | JPY: 6,613 | USD: 41.45 |
|
|
 |
61-1407-93 | FX Hole Φ32 Cutter (mm) FX32 | FX32 | Hall saw | Edge interchangeable,cemented carbide | 1piece | JPY: 7,188 | USD: 45.06 |
|
|
 |
61-1407-94 | FX Hole Φ33 Cutter (mm) FX33 | FX33 | Hall saw | Edge interchangeable,cemented carbide | 1piece | JPY: 7,188 | USD: 45.06 |
|
|
 |
61-1407-95 | FX Hole Φ34 Cutter (mm) FX34 | FX34 | Hall saw | Edge interchangeable,cemented carbide | 1piece | JPY: 7,188 | USD: 45.06 |
|
|
 |
61-1407-96 | FX Hole Φ35 Cutter (mm) FX35 | FX35 | Hall saw | Edge interchangeable,cemented carbide | 1piece | JPY: 7,188 | USD: 45.06 |
|
|
 |
61-1407-97 | FX Hole Φ36 Cutter (mm) FX36 | FX36 | Hall saw | Edge interchangeable,cemented carbide | 1piece | JPY: 8,050 | USD: 50.46 |
|
|
 |
61-1407-98 | FX Hole Φ38 Cutter (mm) FX38 | FX38 | Hall saw | Edge interchangeable,cemented carbide | 1piece | JPY: 8,050 | USD: 50.46 |
|
|
 |
61-1407-99 | FX Hole Φ40 Cutter (mm) FX40 | FX40 | Hall saw | Edge interchangeable,cemented carbide | 1piece | JPY: 8,050 | USD: 50.46 |
|
|
 |
61-1408-01 | FX Hole Φ42 Cutter (mm) FX42 | FX42 | Hall saw | Edge interchangeable,cemented carbide | 1piece | JPY: 8,050 | USD: 50.46 |
|
|
 |
61-1408-02 | FX Hole Φ43 Cutter (mm) FX43 | FX43 | Hall saw | Edge interchangeable,cemented carbide | 1piece | JPY: 8,050 | USD: 50.46 |
|
|
 |
61-1408-03 | FX Hole Φ45 Cutter (mm) FX45 | FX45 | Hall saw | Edge interchangeable,cemented carbide | 1piece | JPY: 8,050 | USD: 50.46 |
|
|
 |
61-1408-04 | FX Hole Φ48 Cutter (mm) FX48 | FX48 | Hall saw | Edge interchangeable,cemented carbide | 1piece | JPY: 8,625 | USD: 54.07 |
|
|
 |
61-1408-05 | FX Hole Φ50 Cutter (mm) FX50 | FX50 | Hall saw | Edge interchangeable,cemented carbide | 1piece | JPY: 8,625 | USD: 54.07 |
|
|
 |
61-1408-06 | FX Hole Φ53 Cutter (mm) FX53 | FX53 | Hall saw | Edge interchangeable,cemented carbide | 1piece | JPY: 9,200 | USD: 57.67 |
|
|
 |
61-1408-07 | FX Hole Φ55 Cutter (mm) FX55 | FX55 | Hall saw | Edge interchangeable,cemented carbide | 1piece | JPY: 9,200 | USD: 57.67 |
|
|
 |
61-1408-37 | Shank (SJ-SDS, FX / MX Hole Cutter) SJSKD | SJSKD | Shank | SDS | 1piece | JPY: 4,313 | USD: 27.04 |
|
|
 |
61-1408-38 | Long Shank (SJ-SDS, FX / Hole Cutter) SJSKDL | SJSKDL | Shank | SDS | 1piece | JPY: 5,750 | USD: 36.04 |
|
|
 |
61-1408-35 | SJ Standard Shank (FX / ตัดรู MX) SJSK | SJSK | Shank | Straight | 1piece | JPY: 2,875 | USD: 18.02 |
|
|
 |
61-1408-36 | SJ Long Shank (FX / MX Hole Cutter) SJSKL | SJSKL | Shank | Straight | 1piece | JPY: 5,750 | USD: 36.04 |
|