60-1332-17 Micrometer (GL17-671 x -15KPA) DTR14-64X-15KPA
คุณลักษณะ
- This pressure gauge is designed to measure low pressure below 50 kPa. It can be used not only to measure pressure directly but also to measure the volume and depth of liquid in the tank.
- However, if the measuring fluid enters the pressure element, the performance will be affected. In such a case, use air as a medium by the air purge method, etc.
- Standard accuracy: ±1.5%F.S. (Optional ±1.0%F.S.) for highly accurate reading of minute pressure.
- The product has a simple structure and is easy to handle.
- When selecting a pressure gauge, select the pressure range so that the upper limit of the normal pressure is within the following range in order to fully demonstrate the performance. For constant pressure: 3/4 or less of maximum value of pressure range/For fluctuating pressure: 2/3 or less of maximum value of pressure range
- Confirm that the wetted part material is suitable for the gas or liquid to be measured. For details, see JIS B 7505-1.
- The product image is an image. It may differ from the actual product.
- Please note that the specifications of the listed products are subject to change or discontinuance without prior notice.
- Only domestic specifications.
ข้อมูลจําเพาะข้อมูลจําเพาะ class="init">
60-1332-17 Micrometer (GL17-671 x -15KPA) DTR14-64X-15KPA 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
NAGANO KEIKI Co., Ltd.
60-1332-17 Micrometer (GL17-671 x -15KPA) DTR14-64X-15KPA
特徴
- This pressure gauge is designed to measure low pressure below 50 kPa. It can be used not only to measure pressure directly but also to measure the volume and depth of liquid in the tank.
- However, if the measuring fluid enters the pressure element, the performance will be affected. In such a case, use air as a medium by the air purge method, etc.
- Standard accuracy: ±1.5%F.S. (Optional ±1.0%F.S.) for highly accurate reading of minute pressure.
- The product has a simple structure and is easy to handle.
- When selecting a pressure gauge, select the pressure range so that the upper limit of the normal pressure is within the following range in order to fully demonstrate the performance. For constant pressure: 3/4 or less of maximum value of pressure range/For fluctuating pressure: 2/3 or less of maximum value of pressure range
- Confirm that the wetted part material is suitable for the gas or liquid to be measured. For details, see JIS B 7505-1.
- The product image is an image. It may differ from the actual product.
- Please note that the specifications of the listed products are subject to change or discontinuance without prior notice.
- Only domestic specifications.
仕様
- Surface Diameter: Φ64
- Shape: Recessed D Frame (Direct Connection Type)
- Connection Screw: R1/4
- Gas Contact Part Material: Capsule Type (It is a method of applying pressure to the inside of two corrugated circular metal plates and using the displacement caused by the pressure.)
- Pressure Range (KPA): -7~0
- Operating temperature range (°C): -5~40
- Case Structure: IP22 Equivalent
-
หมายเลขใบสั่ง
60-1332-17
型番
DTR14-64X-15KPA
標準価格
JPY: 19,200
USD: 120.35
Excange rate 1USD= 159.53JPY
Valid price in Japan
ปริมาณ
1piece
在庫数
サプライヤ在庫
商品のバリエーション （サイズ違い・スペック違い・オプション品など）
商品イメージ
アズワン品番
商品名
型番
ปริมาณปริมาณass="init">
60-1332-17 Micrometer (GL17-671 x -15KPA) DTR14-64X-15KPA 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
NAGANO KEIKI Co., Ltd.
60-1332-17 Micrometer (GL17-671 x -15KPA) DTR14-64X-15KPA
特徴
- This pressure gauge is designed to measure low pressure below 50 kPa. It can be used not only to measure pressure directly but also to measure the volume and depth of liquid in the tank.
- However, if the measuring fluid enters the pressure element, the performance will be affected. In such a case, use air as a medium by the air purge method, etc.
- Standard accuracy: ±1.5%F.S. (Optional ±1.0%F.S.) for highly accurate reading of minute pressure.
- The product has a simple structure and is easy to handle.
- When selecting a pressure gauge, select the pressure range so that the upper limit of the normal pressure is within the following range in order to fully demonstrate the performance. For constant pressure: 3/4 or less of maximum value of pressure range/For fluctuating pressure: 2/3 or less of maximum value of pressure range
- Confirm that the wetted part material is suitable for the gas or liquid to be measured. For details, see JIS B 7505-1.
- The product image is an image. It may differ from the actual product.
- Please note that the specifications of the listed products are subject to change or discontinuance without prior notice.
- Only domestic specifications.
仕様
- Surface Diameter: Φ64
- Shape: Recessed D Frame (Direct Connection Type)
- Connection Screw: R1/4
- Gas Contact Part Material: Capsule Type (It is a method of applying pressure to the inside of two corrugated circular metal plates and using the displacement caused by the pressure.)
- Pressure Range (KPA): -7~0
- Operating temperature range (°C): -5~40
- Case Structure: IP22 Equivalent
-
アズワン品番
60-1332-17
型番
DTR14-64X-15KPA
標準価格
JPY: 19,200
USD: 120.35
Excange rate 1USD= 159.53JPY
Valid price in Japan
入り数
1piece
在庫数
หุ้นซัพพลายเออร์
商品のバリエーション （サイズ違い・スペック違い・オプション品など）
商品イメージ
アズワン品番
商品名
型番
入り数
標準価格
標準価格(ドル)
アズワン在庫
[หุ้นซัพพลายเออร์ใบเสนอราคาs="init">
60-1332-17 Micrometer (GL17-671 x -15KPA) DTR14-64X-15KPA 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
NAGANO KEIKI Co., Ltd.
60-1332-17 Micrometer (GL17-671 x -15KPA) DTR14-64X-15KPA
特徴
- This pressure gauge is designed to measure low pressure below 50 kPa. It can be used not only to measure pressure directly but also to measure the volume and depth of liquid in the tank.
- However, if the measuring fluid enters the pressure element, the performance will be affected. In such a case, use air as a medium by the air purge method, etc.
- Standard accuracy: ±1.5%F.S. (Optional ±1.0%F.S.) for highly accurate reading of minute pressure.
- The product has a simple structure and is easy to handle.
- When selecting a pressure gauge, select the pressure range so that the upper limit of the normal pressure is within the following range in order to fully demonstrate the performance. For constant pressure: 3/4 or less of maximum value of pressure range/For fluctuating pressure: 2/3 or less of maximum value of pressure range
- Confirm that the wetted part material is suitable for the gas or liquid to be measured. For details, see JIS B 7505-1.
- The product image is an image. It may differ from the actual product.
- Please note that the specifications of the listed products are subject to change or discontinuance without prior notice.
- Only domestic specifications.
仕様
- Surface Diameter: Φ64
- Shape: Recessed D Frame (Direct Connection Type)
- Connection Screw: R1/4
- Gas Contact Part Material: Capsule Type (It is a method of applying pressure to the inside of two corrugated circular metal plates and using the displacement caused by the pressure.)
- Pressure Range (KPA): -7~0
- Operating temperature range (°C): -5~40
- Case Structure: IP22 Equivalent
-
アズワン品番
60-1332-17
型番
DTR14-64X-15KPA
標準価格
JPY: 19,200
USD: 120.35
Excange rate 1USD= 159.53JPY
Valid price in Japan
入り数
1piece
在庫数
サプライヤ在庫
商品のバリエーション （サイズ違い・スペック違い・オプション品など）
รูปภาพผลิตภัณฑ์
アズワン品番
商品名
型番
入り数
標準価格
標準価格(ドル)
アズワン在庫
[サプライヤ在庫]
60-1332-10
Microbarometer (GL17-671 x 5KPA) DTR14-64X5KPA
DTR14-64X5KPA
1piece
JPY: 19,200
USD: 120.35
60-1332-11
Micrometer (GL17-671 x 7KPA) DTR14-64X7KPA
DTR14-64X7KPA
1piece
JPY: 19,200
USD: 120.35
60-1332-12
Microbarometer (GL17-671 x 10KPA) DTR14-64X10KPA
DTR14-64X10KPA
1piece
JPY: 19,200
USD: 120.35
60-1332-13
Micrometer (GL17-671 x 15KPA) DTR14-64X15KPA
DTR14-64X15KPA
1piece
JPY: 19,200
USD: 120.35
60-1332-14
Microbarometer (GL17-671 x -5KPA) DTR14-64X-5KPA
DTR14-64X-5KPA
1piece
JPY: 19,200
USD: 120.35
60-1332-15
Micrometer (GL17-671 x -7KPA) DTR14-64X-7KPA
DTR14-64X-7KPA
1piece
JPY: 19,200
USD: 120.35
60-1332-16
Micrometer (GL17-671 x -10KPA) DTR14-64X-10KPA
DTR14-64X-10KPA
1piece
JPY: 19,200
USD: 120.35
60-1332-17
Micrometer (GL17-671 x -15KPA) DTR14-64X-15KPA
DTR14-64X-15KPA
1piece
JPY: 19,200
USD: 120.35
60-1332-18
Micrometer (GL17-671X-2/3KPA) DTR14-64X-23KPA
DTR14-64X-23KPA
1piece
JPY: 20,000
USD: 125.37
60-1332-19
Micrometer (GL17-671X-2/5KPA) DTR14-64X-25KPA
DTR14-64X-25KPA
1piece
JPY: 20,000
USD: 125.37
60-1332-20
Microbarometer (GL17-671X-3/2KPA) DTR14-64X-32KPA
DTR14-64X-32KPA
1piece
JPY: 20,000
USD: 125.37
60-1332-21
Microbarometer (GL17-671X-5/2KPA) DTR14-64X-52KPA
DTR14-64X-52KPA
1piece
JPY: 20,000
USD: 125.37
60-1332-22
Micrometer (GL17-671X-5/5KPA) DTR14-64X-55KPA
DTR14-64X-55KPA
1piece
JPY: 20,000
USD: 125.37
60-1332-23
Microbarometer (GL17-671X-5/10KPA) DTR14-64X-510KPA
DTR14-64X-510KPA
1piece
JPY: 20,000
USD: 125.37
60-1332-24
Micrometer (GL17-671X-10/5KPA) DTR14-64X-105KPA
DTR14-64X-105KPA
1piece
JPY: 20,000
USD: 125.37
หน้านี้เป็นหน้าของ Micrometer (GL17-671 x -15KPA) ที่ขายโดย AS ONE CORPORATION AXEL GLOBAL คือเว็บไซต์ที่แสดงรายการผลิตภัณฑ์กว่า 3 ล้านชิ้นที่ใช้ในหลากหลายสาขา ซึ่งรวมถึงการวิจัยและการพัฒนา การผลิต การสารกึ่งตัวนํา การแพทย์ การดูแลทางการพยาบาล และสุขาภิบาลด้านอาหารอะโซนs="init">
60-1332-17 Micrometer (GL17-671 x -15KPA) DTR14-64X-15KPA 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
ติดต่อเรา
NAGANO KEIKI Co., Ltd.
60-1332-17 Micrometer (GL17-671 x -15KPA) DTR14-64X-15KPA
คุณลักษณะ
- This pressure gauge is designed to measure low pressure below 50 kPa. It can be used not only to measure pressure directly but also to measure the volume and depth of liquid in the tank.
- However, if the measuring fluid enters the pressure element, the performance will be affected. In such a case, use air as a medium by the air purge method, etc.
- Standard accuracy: ±1.5%F.S. (Optional ±1.0%F.S.) for highly accurate reading of minute pressure.
- The product has a simple structure and is easy to handle.
- When selecting a pressure gauge, select the pressure range so that the upper limit of the normal pressure is within the following range in order to fully demonstrate the performance. For constant pressure: 3/4 or less of maximum value of pressure range/For fluctuating pressure: 2/3 or less of maximum value of pressure range
- Confirm that the wetted part material is suitable for the gas or liquid to be measured. For details, see JIS B 7505-1.
- The product image is an image. It may differ from the actual product.
- Please note that the specifications of the listed products are subject to change or discontinuance without prior notice.
- Only domestic specifications.
ข้อมูลจําเพาะ
- Surface Diameter: Φ64
- Shape: Recessed D Frame (Direct Connection Type)
- Connection Screw: R1/4
- Gas Contact Part Material: Capsule Type (It is a method of applying pressure to the inside of two corrugated circular metal plates and using the displacement caused by the pressure.)
- Pressure Range (KPA): -7~0
- Operating temperature range (°C): -5~40
- Case Structure: IP22 Equivalent
-
หมายเลขใบสั่ง
60-1332-17
หมายเลขแบบจําลอง
DTR14-64X-15KPA
ราคามาตรฐาน
JPY: 19,200
USD: 120.35
Excange rate 1USD= 159.53JPY
Valid price in Japan
ปริมาณ
1piece
หุ้นในประเทศญี่ปุ่น
หุ้นซัพพลายเออร์
ผลิตภัณฑ์ที่เกี่ยวข้อง (ขนาดที่แตกต่างกัน, ข้อมูลจําเพาะ,ผลิตภัณฑ์ตัวเลือก ฯลฯ)
รูปภาพผลิตภัณฑ์
หมายเลขใบสั่ง
ชื่อ
หมายเลขแบบจําลอง
ปริมาณ
ราคามาตรฐาน
ราคาที่ถูกต้องในประเทศญี่ปุ่น
หุ้น
[หุ้นซัพพลายเออร์]
60-1332-10
Microbarometer (GL17-671 x 5KPA) DTR14-64X5KPA
DTR14-64X5KPA
1piece
JPY: 19,200
USD: 120.35
60-1332-11
Micrometer (GL17-671 x 7KPA) DTR14-64X7KPA
DTR14-64X7KPA
1piece
JPY: 19,200
USD: 120.35
60-1332-12
Microbarometer (GL17-671 x 10KPA) DTR14-64X10KPA
DTR14-64X10KPA
1piece
JPY: 19,200
USD: 120.35
60-1332-13
Micrometer (GL17-671 x 15KPA) DTR14-64X15KPA
DTR14-64X15KPA
1piece
JPY: 19,200
USD: 120.35
60-1332-14
Microbarometer (GL17-671 x -5KPA) DTR14-64X-5KPA
DTR14-64X-5KPA
1piece
JPY: 19,200
USD: 120.35
60-1332-15
Micrometer (GL17-671 x -7KPA) DTR14-64X-7KPA
DTR14-64X-7KPA
1piece
JPY: 19,200
USD: 120.35
60-1332-16
Micrometer (GL17-671 x -10KPA) DTR14-64X-10KPA
DTR14-64X-10KPA
1piece
JPY: 19,200
USD: 120.35
60-1332-17
Micrometer (GL17-671 x -15KPA) DTR14-64X-15KPA
DTR14-64X-15KPA
1piece
JPY: 19,200
USD: 120.35
60-1332-18
Micrometer (GL17-671X-2/3KPA) DTR14-64X-23KPA
DTR14-64X-23KPA
1piece
JPY: 20,000
USD: 125.37
60-1332-19
Micrometer (GL17-671X-2/5KPA) DTR14-64X-25KPA
DTR14-64X-25KPA
1piece
JPY: 20,000
USD: 125.37
60-1332-20
Microbarometer (GL17-671X-3/2KPA) DTR14-64X-32KPA
DTR14-64X-32KPA
1piece
JPY: 20,000
USD: 125.37
60-1332-21
Microbarometer (GL17-671X-5/2KPA) DTR14-64X-52KPA
DTR14-64X-52KPA
1piece
JPY: 20,000
USD: 125.37
60-1332-22
Micrometer (GL17-671X-5/5KPA) DTR14-64X-55KPA
DTR14-64X-55KPA
1piece
JPY: 20,000
USD: 125.37
60-1332-23
Microbarometer (GL17-671X-5/10KPA) DTR14-64X-510KPA
DTR14-64X-510KPA
1piece
JPY: 20,000
USD: 125.37
60-1332-24
Micrometer (GL17-671X-10/5KPA) DTR14-64X-105KPA
DTR14-64X-105KPA
1piece
JPY: 20,000
USD: 125.37
60-1332-17 Micrometer (GL17-671 x -15KPA) DTR14-64X-15KPA
特徴
- This pressure gauge is designed to measure low pressure below 50 kPa. It can be used not only to measure pressure directly but also to measure the volume and depth of liquid in the tank.
- However, if the measuring fluid enters the pressure element, the performance will be affected. In such a case, use air as a medium by the air purge method, etc.
- Standard accuracy: ±1.5%F.S. (Optional ±1.0%F.S.) for highly accurate reading of minute pressure.
- The product has a simple structure and is easy to handle.
- When selecting a pressure gauge, select the pressure range so that the upper limit of the normal pressure is within the following range in order to fully demonstrate the performance. For constant pressure: 3/4 or less of maximum value of pressure range/For fluctuating pressure: 2/3 or less of maximum value of pressure range
- Confirm that the wetted part material is suitable for the gas or liquid to be measured. For details, see JIS B 7505-1.
- The product image is an image. It may differ from the actual product.
- Please note that the specifications of the listed products are subject to change or discontinuance without prior notice.
- Only domestic specifications.
仕様
- Surface Diameter: Φ64
- Shape: Recessed D Frame (Direct Connection Type)
- Connection Screw: R1/4
- Gas Contact Part Material: Capsule Type (It is a method of applying pressure to the inside of two corrugated circular metal plates and using the displacement caused by the pressure.)
- Pressure Range (KPA): -7~0
- Operating temperature range (°C): -5~40
- Case Structure: IP22 Equivalent
| หมายเลขใบสั่ง | 60-1332-17 | |
|---|---|---|
| 型番 | DTR14-64X-15KPA | |
| 標準価格 |
JPY: 19,200
USD: 120.35
Excange rate 1USD= 159.53JPY
Valid price in Japan |
|
| ปริมาณ | 1piece | |
| 在庫数 |
|
|
| サプライヤ在庫 |
|
|
商品のバリエーション （サイズ違い・スペック違い・オプション品など）
| 商品イメージ | アズワン品番 | 商品名 | 型番 | ปริมาณปริมาณass="init">
60-1332-17 Micrometer (GL17-671 x -15KPA) DTR14-64X-15KPA特徴
仕様
商品のバリエーション （サイズ違い・スペック違い・オプション品など）
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|