ข้อมูลจําเพาะ

• Fluid to be measured: air, water, oil (gas or liquid that does not corrode the connection)
• Operating environment: In a place where there is no flammable gas or liquid that may cause fire or explosion under normal conditions.
• mounting: horizontal mounting
• Connecting Screw: R1/8 (With M5 Knife)
• Wetted Part Material: Diaphragm: SUS630 (17-4 PH), Joint: SUS304
• Maximum allowable pressure: 2 times the pressure range (35MPA, 50MPA is 1.5 x)
• Accuracy: Display accuracy/Temperature coefficient: ±(1.0%F.S. +1digit)at23°C/±0.1%F.S./°C (both zero point and span)
• Display Method: 3 1/2 Digit LED Digital Display (Character Height 10 mm)
• Display Frequency (ms): 200
• Display Units: MPa, kPa
• Power supply: 12~24 V DC ±10% Ripple voltage 10% (P-P) or less
• Current consumption: 30 mA or less
• Signal output/comparator output: NPN open collector ×2 output (Output Capacity 30 V DC 80 mA DC max.) or PNP open collector ×2 output (Output Capacity 80 mA DC max.) Response speed: 5 ms or less. Tangent Displacement: Hysteresis Mode: Variable, Window Comparator Mode: 1%F.S. Fixed. Operation indicator light: red LED ON time light
• Signal Output/Analog Output: Voltage Output: 1~5 V DC load resistance 10 kΩ or more. Output Accuracy: ±1.5%F.S. (relative to the displayed value) Response Speed: 50 ms or Less, Output Resolution: Approx. 30 mV DC
• scaling: display values, analog output
• Loop Check: Comparator Output, Analog Output
• Filter: None, 25 ms, 250 ms, 2.5 s, 5 s, 10 s (time constant) The set value is reflected in the comparator output and analog output.
• Error indication: Pressure out of range at overpressure, comparator overcurrent, zero adjustment
• Hold: Maximum value and minimum value display
• Others: zero tone, key lock
• Protection circuit: power supply reverse connection, comparator overcurrent protection
• Operating temperature range: -10~50°C (no freezing or condensation)
• Operating humidity range: 35~85%RH (no condensation)
• Storage temperature range: -20~60°C (no freezing or condensation)
• Case Structure: Indoor Specification (IP40 IEC Standard)
• Case Material: Front Case Portion PC/ABS (UL94V-0) Rear Case Portion ADC12
• Cable: length 2 m, conductor cross-sectional area 0.18 mm2
• Weight (g): about 100 (including 2 m cable)
• Pressure Range: – 0.1~1MPA
•