ข้อมูลจําเพาะ

• Fluid to be measured: liquid or gas (not to corrode the wetted part material)
• Connected: R1/4
• Accuracy: ±(0.25%F.S. +1 digit) including linearity, hysteresis, repeatability * after zero adjustment
• Temperature coefficient (Both zero point and span): ±0.072%F.S./°C
• Operating temperature range: -20~60°C(No freezing or condensation)
• Storage temperature range: -20~80°C(Without freezing or condensation, and without batteries)
• Unit changeover: MPa, kPa, bar and user-defined (If you wish to use units other than SI units such as psi and kgf/cm2, you can use them only for the purposes specified in the Export Measurement Law.)
• Power: AA alkaline batteries x 2 (Batteries are not included at the time of shipment.)
• Battery life: 2000 hours or more (depending on operating conditions)
• Display period: 1sec (default), 0.5sec, 0.25sec
• Class of protection: IP67
• Protective Boots: 2 Colors (Black or orange) * Optional
• Wetted Part Material: Sensor Part: SUS630 (17-4 PH) Joint: SUS316L
• Material: Case and Back: PC/ABS Window: PC
• Vibration Resistance: MIL-STD-202G, Test Method 201 A
• Impact Resistance: MIL-STD-202G, Test Method 213B, Test Conditions K
• Other features: Display scaling (Cannot be used for products with a continuous molding pressure range.) , tare auto zero (TARE), hold function (Display maximum and minimum values), initialization function (factory setting), power OFF setting, zero point adjustment lock function
• Pressure Range: 0~0.5
• Weight: 150 g (without batteries)
•