60-1291-94 Sealed Type Pressure Gauge Φ75 (BC15-281 x 1.6MPA) DUR38-75X1.6MPA
คุณลักษณะ
- Corresponds to JIS B 7505-1 Bourdon tube pressure gauge. It is a pressure gauge with a structure that transmits the elastic deformation (movement) of the Bourdon tube to the guide. The simple structure makes handling easy. It can measure a wide pressure range and is used in a wide range of fields.
- With the use of a sealed case, it can be used even under conditions such as rain and dew. (Equivalent to JIS C 0920 IP 43)
- Standard compliance seal (type approval) can be used. (depending on size, accuracy and pressure range)
- The pressure measurement range is wide, and corrosion resistance is required.
- Embedded in the panel and attached with screws or metal fittings.
- When selecting a pressure gauge, select the pressure range so that the upper limit of the normal pressure is within the following range in order to fully demonstrate the performance. For constant pressure: not more than 3/4 of the maximum value of the pressure range. For fluctuating pressure: not more than 2/3 of the maximum value of the pressure range. Also, confirm that the material of the wetted part is suitable for the gas or liquid to be measured. For details, see JIS B 7505-1.
- When using for oxygen, please indicate that oil is prohibited. When using for acetylene, specify that it is for corrosion resistant use and that oil is prohibited.
- The product image is an image. It may differ from the actual product.
- Please note that the specifications of the listed products are subject to change or discontinuance without prior notice.
- Only domestic specifications.
ข้อมูลจําเพาะข้อมูลจําเพาะ class="init">
60-1291-94 Sealed Type Pressure Gauge Φ75 (BC15-281 x 1.6MPA) DUR38-75X1.6MPA 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
NAGANO KEIKI Co., Ltd.
60-1291-94 Sealed Type Pressure Gauge Φ75 (BC15-281 x 1.6MPA) DUR38-75X1.6MPA
特徴
- Corresponds to JIS B 7505-1 Bourdon tube pressure gauge. It is a pressure gauge with a structure that transmits the elastic deformation (movement) of the Bourdon tube to the guide. The simple structure makes handling easy. It can measure a wide pressure range and is used in a wide range of fields.
- With the use of a sealed case, it can be used even under conditions such as rain and dew. (Equivalent to JIS C 0920 IP 43)
- Standard compliance seal (type approval) can be used. (depending on size, accuracy and pressure range)
- The pressure measurement range is wide, and corrosion resistance is required.
- Embedded in the panel and attached with screws or metal fittings.
- When selecting a pressure gauge, select the pressure range so that the upper limit of the normal pressure is within the following range in order to fully demonstrate the performance. For constant pressure: not more than 3/4 of the maximum value of the pressure range. For fluctuating pressure: not more than 2/3 of the maximum value of the pressure range. Also, confirm that the material of the wetted part is suitable for the gas or liquid to be measured. For details, see JIS B 7505-1.
- When using for oxygen, please indicate that oil is prohibited. When using for acetylene, specify that it is for corrosion resistant use and that oil is prohibited.
- The product image is an image. It may differ from the actual product.
- Please note that the specifications of the listed products are subject to change or discontinuance without prior notice.
- Only domestic specifications.
ข้อมูลจําเพาะ
- Shape: Recessed Metal Case
- Shape: D Frame (Mounting Hole)
- Connection Screw: R3/8
- Wetted Part Material: General Use
- Pressure range (MPA): 0~1.6
-
หมายเลขใบสั่งหมายเลขใบสั่งss="init">
60-1291-94 Sealed Type Pressure Gauge Φ75 (BC15-281 x 1.6MPA) DUR38-75X1.6MPA 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
NAGANO KEIKI Co., Ltd.
60-1291-94 Sealed Type Pressure Gauge Φ75 (BC15-281 x 1.6MPA) DUR38-75X1.6MPA
特徴
- Corresponds to JIS B 7505-1 Bourdon tube pressure gauge. It is a pressure gauge with a structure that transmits the elastic deformation (movement) of the Bourdon tube to the guide. The simple structure makes handling easy. It can measure a wide pressure range and is used in a wide range of fields.
- With the use of a sealed case, it can be used even under conditions such as rain and dew. (Equivalent to JIS C 0920 IP 43)
- Standard compliance seal (type approval) can be used. (depending on size, accuracy and pressure range)
- The pressure measurement range is wide, and corrosion resistance is required.
- Embedded in the panel and attached with screws or metal fittings.
- When selecting a pressure gauge, select the pressure range so that the upper limit of the normal pressure is within the following range in order to fully demonstrate the performance. For constant pressure: not more than 3/4 of the maximum value of the pressure range. For fluctuating pressure: not more than 2/3 of the maximum value of the pressure range. Also, confirm that the material of the wetted part is suitable for the gas or liquid to be measured. For details, see JIS B 7505-1.
- When using for oxygen, please indicate that oil is prohibited. When using for acetylene, specify that it is for corrosion resistant use and that oil is prohibited.
- The product image is an image. It may differ from the actual product.
- Please note that the specifications of the listed products are subject to change or discontinuance without prior notice.
- Only domestic specifications.
仕様
- Shape: Recessed Metal Case
- Shape: D Frame (Mounting Hole)
- Connection Screw: R3/8
- Wetted Part Material: General Use
- Pressure range (MPA): 0~1.6
-
アズワン品番
60-1291-94
型番
DUR38-75X1.6MPA
ราคามาตรฐานอะโซนs="init">
60-1291-94 Sealed Type Pressure Gauge Φ75 (BC15-281 x 1.6MPA) DUR38-75X1.6MPA 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
ติดต่อเรา
NAGANO KEIKI Co., Ltd.
60-1291-94 Sealed Type Pressure Gauge Φ75 (BC15-281 x 1.6MPA) DUR38-75X1.6MPA
คุณลักษณะ
- Corresponds to JIS B 7505-1 Bourdon tube pressure gauge. It is a pressure gauge with a structure that transmits the elastic deformation (movement) of the Bourdon tube to the guide. The simple structure makes handling easy. It can measure a wide pressure range and is used in a wide range of fields.
- With the use of a sealed case, it can be used even under conditions such as rain and dew. (Equivalent to JIS C 0920 IP 43)
- Standard compliance seal (type approval) can be used. (depending on size, accuracy and pressure range)
- The pressure measurement range is wide, and corrosion resistance is required.
- Embedded in the panel and attached with screws or metal fittings.
- When selecting a pressure gauge, select the pressure range so that the upper limit of the normal pressure is within the following range in order to fully demonstrate the performance. For constant pressure: not more than 3/4 of the maximum value of the pressure range. For fluctuating pressure: not more than 2/3 of the maximum value of the pressure range. Also, confirm that the material of the wetted part is suitable for the gas or liquid to be measured. For details, see JIS B 7505-1.
- When using for oxygen, please indicate that oil is prohibited. When using for acetylene, specify that it is for corrosion resistant use and that oil is prohibited.
- The product image is an image. It may differ from the actual product.
- Please note that the specifications of the listed products are subject to change or discontinuance without prior notice.
- Only domestic specifications.
ข้อมูลจําเพาะ
- Shape: Recessed Metal Case
- Shape: D Frame (Mounting Hole)
- Connection Screw: R3/8
- Wetted Part Material: General Use
- Pressure range (MPA): 0~1.6
-
หมายเลขใบสั่ง
60-1291-94
หมายเลขแบบจําลอง
DUR38-75X1.6MPA
ราคามาตรฐาน
JPY: 12,300
USD: 76.53
Excange rate 1USD= 160.72JPY
Valid price in Japan
ปริมาณ
1piece
หุ้นในประเทศญี่ปุ่น
หุ้นซัพพลายเออร์
ผลิตภัณฑ์ที่เกี่ยวข้อง (ขนาดที่แตกต่างกัน, ข้อมูลจําเพาะ,ผลิตภัณฑ์ตัวเลือก ฯลฯ)
รูปภาพผลิตภัณฑ์
หมายเลขใบสั่ง
ชื่อ
หมายเลขแบบจําลอง
ปริมาณ
ราคามาตรฐาน
ราคาที่ถูกต้องในประเทศญี่ปุ่น
หุ้น
[หุ้นซัพพลายเออร์]
60-1291-86
Sealed Type Pressure Gauge Φ75 (BC15-281 x 0.1MPA) DUR38-75X0.1MPA
DUR38-75X0.1MPA
1piece
JPY: 12,300
USD: 76.53
60-1291-87
Sealed Type Pressure Gauge Φ75 (BC15-281 x 0.2MPA) DUR38-75X0.2MPA
DUR38-75X0.2MPA
1piece
JPY: 12,300
USD: 76.53
60-1291-88
Sealed Type Pressure Gauge Φ75 (BC15-281 x 0.25MPA) DUR38-75X0.25MPA
DUR38-75X0.25MPA
1piece
JPY: 12,300
USD: 76.53
60-1291-89
Sealed Type Pressure Gauge Φ75 (BC15-281 x 0.3MPA) DUR38-75X0.3MPA
DUR38-75X0.3MPA
1piece
JPY: 12,300
USD: 76.53
60-1291-90
Sealed Pressure Gauge Diameter: Φ75 (BC15-281 x 0.4MPA) DUR38-75X0.4MPA
DUR38-75X0.4MPA
1piece
JPY: 12,300
USD: 76.53
60-1291-91
Sealed Type Pressure Gauge Φ75 (BC15-281 x 0.6MPA) DUR38-75X0.6MPA
DUR38-75X0.6MPA
1piece
JPY: 12,300
USD: 76.53
60-1291-92
Sealed Pressure Gauge Diameter: Φ75 (BC15-281 x 1MPA) DUR38-75X1MPA
DUR38-75X1MPA
1piece
JPY: 12,300
USD: 76.53
60-1291-93
Sealed Type Pressure Gauge Φ75 (BC15-281 x 1.5MPA) DUR38-75X1.5MPA
DUR38-75X1.5MPA
1piece
JPY: 12,300
USD: 76.53
60-1291-94
Sealed Type Pressure Gauge Φ75 (BC15-281 x 1.6MPA) DUR38-75X1.6MPA
DUR38-75X1.6MPA
1piece
JPY: 12,300
USD: 76.53
60-1291-95
Sealed Type Pressure Gauge Φ75 (BC15-281 x 2MPA) DUR38-75X2MPA
DUR38-75X2MPA
1piece
JPY: 12,300
USD: 76.53
60-1291-96
Sealed Pressure Gauge Diameter: Φ75 (BC15-281 x 2.5MPA) DUR38-75X2.5MPA
DUR38-75X2.5MPA
1piece
JPY: 12,300
USD: 76.53
60-1291-97
Sealed Pressure Gauge Diameter: Φ75 (BC15-281 x 3.5MPA) DUR38-75X3.5MPA
DUR38-75X3.5MPA
1piece
JPY: 12,300
USD: 76.53
60-1291-98
Sealed Type Pressure Gauge Φ75 (BC15-281 x 4MPA) DUR38-75X4MPA
DUR38-75X4MPA
1piece
JPY: 14,700
USD: 91.46
60-1291-99
Sealed Type Pressure Gauge Φ75 (BC15-281 x 5MPA) DUR38-75X5MPA
DUR38-75X5MPA
1piece
JPY: 14,800
USD: 92.09
60-1292-01
Sealed Type Pressure Gauge Φ75 (BC15-281 x 6MPA) DUR38-75X6MPA
DUR38-75X6MPA
1piece
JPY: 14,700
USD: 91.46
60-1292-02
Sealed Pressure Gauge Diameter: Φ75 (BC15-281 x 10MPA) DUR38-75X10MPA
DUR38-75X10MPA
1piece
JPY: 14,700
USD: 91.46
60-1292-03
Sealed Pressure Gauge Diameter: Φ75 (BC15-281 x 16MPA) DUR38-75X16MPA
DUR38-75X16MPA
1piece
JPY: 16,800
USD: 104.53
60-1292-04
Sealed Type Pressure Gauge Φ75 (BC15-281 x 25MPA) DUR38-75X25MPA
DUR38-75X25MPA
1piece
JPY: 16,800
USD: 104.53
60-1292-05
Sealed Type Pressure Gauge Φ75 (BC15-281 x 35MPA) DUR38-75X35MPA
DUR38-75X35MPA
1piece
JPY: 17,000
USD: 105.77
60-1291-94 Sealed Type Pressure Gauge Φ75 (BC15-281 x 1.6MPA) DUR38-75X1.6MPA
特徴
- Corresponds to JIS B 7505-1 Bourdon tube pressure gauge. It is a pressure gauge with a structure that transmits the elastic deformation (movement) of the Bourdon tube to the guide. The simple structure makes handling easy. It can measure a wide pressure range and is used in a wide range of fields.
- With the use of a sealed case, it can be used even under conditions such as rain and dew. (Equivalent to JIS C 0920 IP 43)
- Standard compliance seal (type approval) can be used. (depending on size, accuracy and pressure range)
- The pressure measurement range is wide, and corrosion resistance is required.
- Embedded in the panel and attached with screws or metal fittings.
- When selecting a pressure gauge, select the pressure range so that the upper limit of the normal pressure is within the following range in order to fully demonstrate the performance. For constant pressure: not more than 3/4 of the maximum value of the pressure range. For fluctuating pressure: not more than 2/3 of the maximum value of the pressure range. Also, confirm that the material of the wetted part is suitable for the gas or liquid to be measured. For details, see JIS B 7505-1.
- When using for oxygen, please indicate that oil is prohibited. When using for acetylene, specify that it is for corrosion resistant use and that oil is prohibited.
- The product image is an image. It may differ from the actual product.
- Please note that the specifications of the listed products are subject to change or discontinuance without prior notice.
- Only domestic specifications.
ข้อมูลจําเพาะ
- Shape: Recessed Metal Case
- Shape: D Frame (Mounting Hole)
- Connection Screw: R3/8
- Wetted Part Material: General Use
- Pressure range (MPA): 0~1.6
หมายเลขใบสั่งหมายเลขใบสั่งss="init">
60-1291-94 Sealed Type Pressure Gauge Φ75 (BC15-281 x 1.6MPA) DUR38-75X1.6MPA特徴
仕様
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|