The seven digits of the model number (model number) are below the scale mark.
Standard compliance seal (type approval) can be used. (depending on size, accuracy and pressure range)
The pressure measurement range is wide, and corrosion resistance is required.
Embedded in the panel and attached with screws or metal fittings.
When selecting a pressure gauge, select the pressure range so that the upper limit of normal pressure is within the following range to fully demonstrate the performance. (For constant pressure: 3/4 or less of maximum value of pressure range) (For fluctuating pressure: 2/3 or less of maximum value of pressure range)
Confirm that the wetted part material is suitable for the gas and liquid to be measured.
When using for oxygen, please specify that oil is prohibited.
When using for acetylene, specify that it is for corrosion-resistant use and that oil is prohibited.
The product image is an image. It may differ from the actual product.
Please note that the specifications of the listed products are subject to change or discontinuance without prior notice.
Only domestic specifications.
仕様
Type: Vertical Type (D Frame) (Mounting Bracket)
Surface Diameter: Φ100
Fluid to be measured: gas or liquid
Connection Screw: G1/2B
Wetted Part Material: Corrosion Resistant
Pressure Range (MPA): -0.1~0.16
Precision: JIS1.6 grade (according to JIS precision grade) JIS1.0 grade can also be manufactured by your request. (When the pressure range is 0.1MPA or more for Φ100, Φ150, and Φ200)
หมายเลขใบสั่ง
60-1267-77
型番
DU12-100X-0.10.16MPA
標準価格
JPY: 21,400USD: 134.24
Excange rate 1USD= 159.42JPY Valid price in Japan
ปริมาณ
1piece
在庫数
サプライヤ在庫
商品のバリエーション （サイズ違い・スペック違い・オプション品など）
商品イメージ
アズワン品番
商品名
型番
ปริมาณหุ้นในประเทศญี่ปุ่นass="init">
60-1267-77 Plain Coupled Meter (AE15-143 x -0.1/0.16MPA) DU12-100X-0.10.16MPA 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
The seven digits of the model number (model number) are below the scale mark.
Standard compliance seal (type approval) can be used. (depending on size, accuracy and pressure range)
The pressure measurement range is wide, and corrosion resistance is required.
Embedded in the panel and attached with screws or metal fittings.
When selecting a pressure gauge, select the pressure range so that the upper limit of normal pressure is within the following range to fully demonstrate the performance. (For constant pressure: 3/4 or less of maximum value of pressure range) (For fluctuating pressure: 2/3 or less of maximum value of pressure range)
Confirm that the wetted part material is suitable for the gas and liquid to be measured.
When using for oxygen, please specify that oil is prohibited.
When using for acetylene, specify that it is for corrosion-resistant use and that oil is prohibited.
The product image is an image. It may differ from the actual product.
Please note that the specifications of the listed products are subject to change or discontinuance without prior notice.
Only domestic specifications.
仕様
Type: Vertical Type (D Frame) (Mounting Bracket)
Surface Diameter: Φ100
Fluid to be measured: gas or liquid
Connection Screw: G1/2B
Wetted Part Material: Corrosion Resistant
Pressure Range (MPA): -0.1~0.16
Precision: JIS1.6 grade (according to JIS precision grade) JIS1.0 grade can also be manufactured by your request. (When the pressure range is 0.1MPA or more for Φ100, Φ150, and Φ200)
