60-1263-40 Standard Pressure Gauge (AC15-233 x 35MPA) DU38-75X35MPA
คุณลักษณะ
- The seven digits of the model number (model number) are below the scale mark.
- Standard compliance seal (type approval) can be used. (depending on size, accuracy and pressure range)
- The pressure measurement range is wide, and corrosion resistance is required.
- Embedded in the panel and attached with screws or metal fittings.
- When selecting a pressure gauge, select the pressure range so that the upper limit of normal pressure is within the following range to fully demonstrate the performance. (For constant pressure: 3/4 or less of maximum value of pressure range) (For fluctuating pressure: 2/3 or less of maximum value of pressure range)
- Confirm that the wetted part material is suitable for the gas and liquid to be measured.
- When using for oxygen, please specify that oil is prohibited.
- When using for acetylene, specify that it is for corrosion-resistant use and that oil is prohibited.
- The product image is an image. It may differ from the actual product.
- Please note that the specifications of the listed products are subject to change or discontinuance without prior notice.
- Only domestic specifications.
ข้อมูลจําเพาะ
- Type: Vertical Type (D Frame) (Mounting Hole)
- Surface Diameter: Φ75
- Fluid to be measured: gas or liquid
- Connection Screw: G3/8B
- Wetted Part Material: Corrosion Resistant
- Pressure range (MPA): 0~35
- Precision: JIS1.6 grade (according to JIS precision grade) JIS1.0 grade can also be manufactured by your request. (When the pressure range is 0.1MPA or more for Φ100, Φ150, and Φ200)
| หมายเลขใบสั่ง | 60-1263-40 | |
|---|---|---|
| หมายเลขแบบจําลอง | DU38-75X35MPA | |
| ราคามาตรฐาน |
JPY: 19,100
USD: 119.73
Excange rate 1USD= 159.53JPY
Valid price in Japan |
|
| ปริมาณ | 1piece | |
| หุ้นในประเทศญี่ปุ่น |
|
|
| หุ้นซัพพลายเออร์ |
|
|
ผลิตภัณฑ์ที่เกี่ยวข้อง (ขนาดที่แตกต่างกัน, ข้อมูลจําเพาะ,ผลิตภัณฑ์ตัวเลือก ฯลฯ)
| รูปภาพผลิตภัณฑ์ | หมายเลขใบสั่ง | ชื่อ | หมายเลขแบบจําลอง | ปริมาณ | ราคามาตรฐาน | ราคาที่ถูกต้องในประเทศญี่ปุ่น | หุ้น [หุ้นซัพพลายเออร์] |
|
|---|---|---|---|---|---|---|---|---|
 |
60-1263-14 | Standard Pressure Gauge (AC15-233 x 40KPA) DU38-75X40KPA | DU38-75X40KPA | 1piece | JPY: 21,100 | USD: 132.26 |
|
|
 |
60-1263-15 | Standard Pressure Gauge (AC15-233 x 50KPA) DU38-75X50KPA | DU38-75X50KPA | 1piece | JPY: 21,000 | USD: 131.64 |
|
|
 |
60-1263-16 | Standard Pressure Gauge (AC15-233 x 0.05MPA) DU38-75X0.05MPA | DU38-75X0.05MPA | 1piece | JPY: 21,000 | USD: 131.64 |
|
|
 |
60-1263-17 | Standard Pressure Gauge (AC15-233 x 0.1MPA) DU38-75X0.1MPA | DU38-75X0.1MPA | 1piece | JPY: 14,500 | USD: 90.89 |
|
|
 |
60-1263-18 | Standard Pressure Gauge (AC15-233 x 0.16MPA) DU38-75X0.16MPA | DU38-75X0.16MPA | 1piece | JPY: 14,500 | USD: 90.89 |
|
|
 |
60-1263-19 | Standard Pressure Gauge (AC15-233 x 0.2MPA) DU38-75X0.2MPA | DU38-75X0.2MPA | 1piece | JPY: 14,600 | USD: 91.52 |
|
|
 |
60-1263-20 | Standard Pressure Gauge (AC15-233 x 0.25MPA) DU38-75X0.25MPA | DU38-75X0.25MPA | 1piece | JPY: 14,500 | USD: 90.89 |
|
|
 |
60-1263-21 | Standard Pressure Gauge (AC15-233 x 0.3MPA) DU38-75X0.3MPA | DU38-75X0.3MPA | 1piece | JPY: 14,600 | USD: 91.52 |
|
|
 |
60-1263-22 | Standard Pressure Gauge (AC15-233 x 0.4MPA) DU38-75X0.4MPA | DU38-75X0.4MPA | 1piece | JPY: 14,500 | USD: 90.89 |
|
|
 |
60-1263-23 | Standard Pressure Gauge (AC15-233 x 0.5MPA) DU38-75X0.5MPA | DU38-75X0.5MPA | 1piece | JPY: 14,600 | USD: 91.52 |
|
|
 |
60-1263-24 | Standard Pressure Gauge (AC15-233 x 0.6MPA) DU38-75X0.6MPA | DU38-75X0.6MPA | 1piece | JPY: 14,500 | USD: 90.89 |
|
|
 |
60-1263-25 | Standard Pressure Gauge (AC15-233 x 1MPA) DU38-75X1MPA | DU38-75X1MPA | 1piece | JPY: 14,500 | USD: 90.89 |
|
|
 |
60-1263-26 | Standard Pressure Gauge (AC15-233 x 1.5MPA) DU38-75X1.5MPA | DU38-75X1.5MPA | 1piece | JPY: 14,600 | USD: 91.52 |
|
|
 |
60-1263-27 | Standard Pressure Gauge (AC15-233 x 1.6MPA) DU38-75X1.6MPA | DU38-75X1.6MPA | 1piece | JPY: 14,500 | USD: 90.89 |
|
|
 |
60-1263-28 | Standard Pressure Gauge (AC15-233 x 2MPA) DU38-75X2MPA | DU38-75X2MPA | 1piece | JPY: 14,600 | USD: 91.52 |
|
|
 |
60-1263-29 | Standard Pressure Gauge (AC15-233 x 2.5MPA) DU38-75X2.5MPA | DU38-75X2.5MPA | 1piece | JPY: 14,500 | USD: 90.89 |
|
|
 |
60-1263-30 | Standard Pressure Gauge (AC15-233 x 3MPA) DU38-75X3MPA | DU38-75X3MPA | 1piece | JPY: 14,600 | USD: 91.52 |
|
|
 |
60-1263-31 | Standard Pressure Gauge (AC15-233 x 3.5MPA) DU38-75X3.5MPA | DU38-75X3.5MPA | 1piece | JPY: 14,600 | USD: 91.52 |
|
|
 |
60-1263-32 | Standard Pressure Gauge (AC15-233 x 4MPA) DU38-75X4MPA | DU38-75X4MPA | 1piece | JPY: 17,000 | USD: 106.56 |
|
|
 |
60-1263-33 | Standard Pressure Gauge (AC15-233 x 5MPA) DU38-75X5MPA | DU38-75X5MPA | 1piece | JPY: 17,100 | USD: 107.19 |
|
|
 |
60-1263-34 | Standard Pressure Gauge (AC15-233 x 6MPA) DU38-75X6MPA | DU38-75X6MPA | 1piece | JPY: 17,000 | USD: 106.56 |
|
|
 |
60-1263-35 | Standard Pressure Gauge (AC15-233 x 7MPA) DU38-75X7MPA | DU38-75X7MPA | 1piece | JPY: 17,100 | USD: 107.19 |
|
|
 |
60-1263-36 | Standard Pressure Gauge (AC15-233 x 10MPA) DU38-75X10MPA | DU38-75X10MPA | 1piece | JPY: 17,000 | USD: 106.56 |
|
|
 |
60-1263-37 | Standard Pressure Gauge (AC15-233 x 15MPA) DU38-75X15MPA | DU38-75X15MPA | 1piece | JPY: 19,100 | USD: 119.73 |
|
|
 |
60-1263-38 | Standard Pressure Gauge (AC15-233 x 16MPA) DU38-75X16MPA | DU38-75X16MPA | 1piece | JPY: 19,100 | USD: 119.73 |
|
|
 |
60-1263-39 | Standard Pressure Gauge (AC15-233 x 25MPA) DU38-75X25MPA | DU38-75X25MPA | 1piece | JPY: 19,100 | USD: 119.73 |
|
|
 |
60-1263-40 | Standard Pressure Gauge (AC15-233 x 35MPA) DU38-75X35MPA | DU38-75X35MPA | 1piece | JPY: 19,100 | USD: 119.73 |
|
|
 |
60-1263-41 | Standard Pressure Gauge (AC15-233 x 40MPA) DU38-75X40MPA | DU38-75X40MPA | 1piece | JPY: 22,700 | USD: 142.29 |
|
|
 |
60-1263-42 | Standard Pressure Gauge (AC15-233 x 50MPA) DU38-75X50MPA | DU38-75X50MPA | 1piece | JPY: 22,800 | USD: 142.92 |
|