1-7478-41-28 Constant Temperature Dryer (program function specification, natural convection type) 27 L with Pre-shipment Validation EOP-300V
ข้อมูลจําเพาะ
- Validated products are Azuwan original services that conduct FAT (Factory Acceptance Test) at Azuwan before shipping.
- Validate (FAT) before shipping.
- After receiving the order, a FAT instruction form (plan) is sent to the user, and after the signature is returned, the FAT is performed.
- Appendix: FAT report/Calibration Certificate of used measuring instrument copied
- *I am attaching Azwan's original FAT instruction manual (see the sample at the bottom left of the Screen).
- Temperature points: 9 points at 300 degrees Celsius
- Capacity (L): 27
- Temperature adjustment range: room temperature + 20 ~ 300 degrees C
- Maximum temperature reach time: approximately 55 minutes
- Temperature distribution (JTM K05): +/- 8 degrees C (at 300 degrees C)
- Temperature variation (JIS): +/- 3 degrees C (at 300 degrees C)
- Temperature Gradient (JIS): 31 degrees C (at 300 degrees C)
- Temperature control system: PID control, SSR output
- Additional Features: Program Function Specifications/Air Jacket Natural Convection Type - > Program Function of Up to 8 Steps x 4 Patterns
- Safety devices: Independent overtemperature protection device (operating temperature can be set digitally)/Overcurrent breaker/burnout mechanism (heater OFF when sensor is disconnected)
- Heater capacity: 1000 W
- Temperature Sensor: K thermocouples x 2 (1 each for controlling temperature and preventing excessive rise)
- Internal dimensions: 300 x 300 x 300 mm
- Shelf Pitch/Number of Racks: 35 mm/7 Racks
- Exterior/Interior: Steel powder coating/Stainless steel (SUS 304)
- Vent: 32 mm in diameter x 2
- External dimensions: 400 x 410 x 630 mm
- Weight: approximately 30 kg
- Power supply: 100 VAC 50/60 Hz Cord length 2 m (3P plug)
- Current rating: 10.5 A
- Shelf load capacity: 15 kg
- Accessories: 2 shelf boards, 2 shelf rails
- Local validation services (IQ/OQ) are also available. Please contact us.
- *The on-site validation service is a service that performs installation qualification (IQ) and operational performance qualification (OQ) at the installation site and submits an inspection form.
- *Do not put combustible materials in the cabinet.
- *If you would like to request a local IQOQ, please contact us separately. We need your installation address for the estimate.
| หมายเลขใบสั่ง | 1-7478-41-28 | |
|---|---|---|
| หมายเลขแบบจําลอง | EOP-300V | |
| รหัส JAN | 4589638434846 | |
| ราคามาตรฐาน |
JPY: 198,000
USD: 1,241.15
Excange rate 1USD= 159.53JPY
Valid price in Japan |
|
| ปริมาณ | 1box | |
| หุ้นในประเทศญี่ปุ่น |
|
|
| หุ้นซัพพลายเออร์ |
|
|
ผลิตภัณฑ์ที่เกี่ยวข้อง (ขนาดที่แตกต่างกัน, ข้อมูลจําเพาะ,ผลิตภัณฑ์ตัวเลือก ฯลฯ)
| รูปภาพผลิตภัณฑ์ | หมายเลขใบสั่ง | ชื่อ | หมายเลขแบบจําลอง | ปริมาณ | ราคามาตรฐาน | ราคาที่ถูกต้องในประเทศญี่ปุ่น | หุ้น [หุ้นซัพพลายเออร์] |
|
|---|---|---|---|---|---|---|---|---|
 |
1-7478-41-28 | Constant Temperature Dryer (program function specification, natural convection type) 27 L with Pre-shipment Validation EOP-300V | EOP-300V |
|
1box | JPY: 198,000 | USD: 1,241.15 |
|
 |
1-7478-42-28 | Constant Temperature Dryer (program function specification, natural convection type) 87 L with Pre-shipment Validation EOP-450V | EOP-450V |
|
1box | JPY: 218,000 | USD: 1,366.51 |
|
 |
1-9382-41-28 | Constant Temperature Dryer (program function specification, natural convection type) 150 L with Pre-shipment Validation EOP-600V | EOP-600V |
|
1box | JPY: 240,000 | USD: 1,504.42 |
|
 |
1-9382-42-28 | Constant Temperature Dryer (program function specification, natural convection type) 135 L with Pre-shipment Validation EOP-700V | EOP-700V |
|
1box | JPY: 240,000 | USD: 1,504.42 |
|
