AS ONE Corporation

1-5504-41-57　Auto Dry Desiccator 574 x 524 x 1065mm Reinforced Plastic Shelf Board with Chinese Calibration Certificate　SP-BGFN-P

คุณลักษณะ

Eliminates dead space in the desiccator, allowing for efficient use of the interior.
By adopting a new door opening and closing mechanism and eliminating dead space when opening and closing the door, it can be installed without gaps on the wall.
The new dehumidification unit has no driving part and no source of sound or vibration, so it has excellent durability.
Since the moisture inside the desiccator is discharged directly to the outside in a gaseous state, no water drops (drain) are generated.
Comes with rubber feet.
Humidity is controlled by the front panel (analog setting).
Standard series with lightweight aluminum frame and resin clear panel.
Equipped with a new type of solid polymer electrolyte membrane (Rosal) on the front panel, it directly electrolyses and continuously removes moisture from the interior air, enabling stable dehumidification.

Auto Dry Type
Dehumidification Method: Electrolytic Discharge of H2O by Solid Polymer Electrolyte Membrane
Humidity Setting Range: 20~50%RH (Depends on Operating Environment)
Humidity Control Range: 20%RH~ Indoor Humidity (at no load in the storage, depends on operating environment)
Humidity control system: Dial automatic adjustment type (relative humidity)
Dehumidifying element effective film area: about 25 cm2
Material (Body/Frame): PMMA (Acrylic)/Aluminum
Caster Specification (2 Front Wheel Stoppers): None (Rubber Feet)
Shelf Board Specification: Made of Reinforced Plastic
Shelf Board Dimensions/Mounting Pitch: 490 x 460 mm/50 mm
Shelf Board Spacing: 35 mm
Shelf Board Load Capacity: Approx. 10 kg/Sheet
Door Packing: Magnet Type
Power: 100 VAC 50/60Hz
Average power consumption: 4 W
Maximum power consumption: 27 W
Power Cord Length: Approx. 2.5 m (3P Plug)
Body Weight: 19 kg
Accessories: Shelf Boards x 4, Digital Temperature and Humidity Monitor (THA-01M)
External Dimensions (mm): 574 x 522 x 1074
Inner Dimensions (mm): 494 x 460 x 848
Reinforced Plastic Shelf with Rubber Feet
*Special order and additional processing are available.

หมายเลขใบสั่ง	1-5504-41-57
หมายเลขแบบจําลอง	SP-BGFN-P
รหัส JAN	4580809899907
ราคามาตรฐาน	JPY: 187,000 USD: 1,173.00 Excange rate 1USD= 159.42JPY Valid price in Japan
ปริมาณ	1unit
หุ้นในประเทศญี่ปุ่น
หุ้นซัพพลายเออร์

รูปภาพผลิตภัณฑ์	หมายเลขใบสั่ง	ชื่อ	หมายเลขแบบจําลอง		ปริมาณ	ราคามาตรฐาน	ราคาที่ถูกต้องในประเทศญี่ปุ่น	หุ้น [หุ้นซัพพลายเออร์]
	1-5504-41-57	Auto Dry Desiccator 574 x 524 x 1065mm Reinforced Plastic Shelf Board with Chinese Calibration Certificate　SP-BGFN-P	SP-BGFN-P		1unit	JPY: 187,000	USD: 1,173.00
	1-5504-42-57	Auto Dry Desiccator 574 x 524 x 1065mm Stainless Steel Shelf Board with Chinese Calibration Certificate　SP-BGFN-S	SP-BGFN-S		1unit	JPY: 204,000	USD: 1,279.64

1 / 1 ページ