1-5504-41-20 Auto Dry Desiccator BG/FN 574 x 524 x 1065 mm Reinforced Plastic Shelf Board with Calibration Certificate SP-BGFN-P
คุณลักษณะ
- The dead space in the desiccator is eliminated, and the inside of the cabinet can be used effectively.
- By adopting a new type of door opening/closing mechanism and eliminating dead space when opening/closing the door, it can be installed without clearance on the wall surface.
- The new dehumidification unit has no driving part and no source of sound or vibration, so it has excellent durability.
- Moisture inside the desiccator is released directly to the outside in a gaseous state, so water droplets (drains) do not appear.
- Comes with rubber feet.
- The humidity control is controlled (analog setting) on the front panel.
- Standard series of lightweight aluminum frame and resin clear panel.
- A new type of solid polymer electrolyte membrane (Rosal) is installed on the front panel to directly electrolyse and continuously remove moisture from the interior air, enabling stable dehumidification.
- Attached is the calibration certificate (Certificate of calibration, inspection report, traceability system chart) of the digital temperature and humidity monitor (THA-01M) supplied with the desiccator, which was calibrated at 25°C and 50% humidity at the time of shipment.
ข้อมูลจําเพาะ
- Auto Dry Type
- Dehumidification method: Electrolytic discharge of H2O by solid polymer electrolyte membrane
- Humidity setting range: 20 ~ 50% RH (depends on operating environment)
- Humidity Control Range: 20% RH to Indoor Humidity (at no load inside, depending on operating environment)
- Humidity control system: Automatic dial adjustment (relative humidity)
- Dehumidifying element effective film area: approximately 25 cm2
- Material (Body/Frame): PMMA (Acrylic)/Aluminum
- Caster specifications (front wheel 2-place stopper): None (rubber feet)
- Shelf Board Specifications: Reinforced Plastic
- Shelf dimensions/mounting pitch: 490 x 460 mm/50 mm
- Shelf board spacing: 35 mm
- Shelf Board Load Capacity: Approx. 10 kg/sheet
- Door packing: magnetic
- Power supply: 100 VAC 50/60 Hz
- Average power consumption: 4W
- Maximum power consumption: 27 W
- Power cord length: approx. 2.5 m (3 P plug)
- Body weight: 18 kg
- Accessories: 4 shelves, calibrated digital temperature and humidity monitor (THA-01M)
- External dimensions (mm): 574 x 524 x 1065
- Internal dimensions (mm): 560 x 483 x 864
- Reinforced plastic shelf with rubber feet
- The calibration point is 25 degrees C, 50%. If you would like additional points, please contact us separately.
*ผลิตภัณฑ์นี้อาจต้องการค่าธรรมเนียมเพิ่มเติม
| หมายเลขใบสั่ง | 1-5504-41-20 | |
|---|---|---|
| หมายเลขแบบจําลอง | SP-BGFN-P | |
| ราคามาตรฐาน |
JPY: 180,000
USD: 1,129.09
Excange rate 1USD= 159.42JPY
Valid price in Japan |
|
| ปริมาณ | 1unit | |
| หุ้นในประเทศญี่ปุ่น |
|
|
| หุ้นซัพพลายเออร์ |
|
|
ผลิตภัณฑ์ที่เกี่ยวข้อง (ขนาดที่แตกต่างกัน, ข้อมูลจําเพาะ,ผลิตภัณฑ์ตัวเลือก ฯลฯ)
| รูปภาพผลิตภัณฑ์ | หมายเลขใบสั่ง | ชื่อ | หมายเลขแบบจําลอง | ปริมาณ | ราคามาตรฐาน | ราคาที่ถูกต้องในประเทศญี่ปุ่น | หุ้น [หุ้นซัพพลายเออร์] |
|
|---|---|---|---|---|---|---|---|---|
 |
1-5504-41-20 | Auto Dry Desiccator BG/FN 574 x 524 x 1065 mm Reinforced Plastic Shelf Board with Calibration Certificate SP-BGFN-P | SP-BGFN-P |
|
1unit | JPY: 180,000 | USD: 1,129.09 |
|
 |
1-5504-42-20 | Auto Dry Desiccator BG/FN 574 x 524 x 1065 mm Stainless Steel Shelf Board with Calibration Certificate SP-BGFN-S | SP-BGFN-S |
|
1unit | JPY: 196,000 | USD: 1,229.46 |
|
