해머, 펀치 및 끌
필터
-
RS PRO 5mm x 9 피스 판각 펀치 세트(0 → 9) 251-750
Punch for letters and numbers
Hand punch for engraving permanent identification mark Improves durability and achieves maximum safety Hardening and resistance processing Can be engraved on materials up to Rockwell hardness C scale 40 Sturdy plastic box included1 제품을 찾았습니다.
JPY: 3,100
USD: 19.43
-
RS PRO 직선 텅스텐 카바이드 팁 스크라이브 394-190
Tungsten Carbide
Engineered pattern straight or straight/angle-tipped scribe with carbide tip. The tungsten carbide tipped scribe is suitable for use with hard and abrasive materials, such as stainless steel, anodized aluminum, ceramic, and glass, where the sharpness of a typical HSS scribe can rapidly become dull.1 제품을 찾았습니다.
JPY: 1,320
USD: 8.27
-
RS 프로 스트레이트 다이아몬드 팁 플라스틱 스크라이브 394-217
Diamond Tip
Includes a 90 ° conical industrial diamond pocket clip top with a polished finish attached to steel that can be manually marked on very hard parts and materials. Can carve stainless steel, glass, ceramic, silica filled plastics Can permanently identify parts Best for manual scribing and splitting of glass rods up to 0.5 mm thick and ceramic or silicone materials Use part number 394-207 scribe for marking mild steel, aluminum, and other soft materials1 제품을 찾았습니다.
JPY: 7,760
USD: 48.64
-
RS PRO 고무 맬렛 550.0g 539-104
Rubber Hammer
Perfect for general industrial applications, metal working, woodworking and finishing work1 제품을 찾았습니다.
JPY: 2,650
USD: 16.61
-
RS 프로 라운드 폴리에틸렌 말렛 480g 222-1530
플라스틱 말렛 Thorex 초고분자량 폴리에틸렌 헤드가 있고 재 손잡이가 달린 헤드 파손 또는 박리 되지 않는 헤드는 나무와 황동 스파크 방지 웨지로 안전하게 고정됩니다. 내구성과 고내마모성이 결합된 매우 높은 충격 강도를 가지고 있습니다. 작업 표면에 변색되거나 자국이 남지 않습니다. 제조, 서비스 및 조립 산업에 이상적입니다
1 제품을 찾았습니다.
JPY: 6,030
USD: 37.80
-
애쉬 핸들이 달린 Facom 1.5kg급 망치 1262H.125
해머 이 말렛은 탄소강으로 만들어졌습니다. 이 단조 합금은 이 도구의 성능과 서비스 수명을 크게 향상시킵니다. 눈에 띄는 면은 평평하고 비스듬하며 손잡이는 재 나무 안에 있다. 이 말레는 목재 한 개와 금속 한 개의 모서리가 있는 높은 보안성을 지닌 디자인을 특징으로 합니다. 모델: 1250g.
1 제품을 찾았습니다.
JPY: 9,670
USD: 60.62
-
카바이드 직사 DELA.1589.00
카바이드 펜 스크라이버. 클립이 있는 육각형 강재 몸체. 12mm 팁 재조정 가능
1 제품을 찾았습니다.
JPY: 1,840
USD: 11.53
-
파콤 중심 펀치 257.G
Facom 257.G 자동 중심 펀치, 쉬어드(Sheathed) 주변 재료를 손상시키지 않고 금속과 같은 중량이 많은 재료의 범위를 안전하고 효율적으로 뚫거나 표시하기 위해 설계된 초내구성 손 도구인 파콤의 전문 센터 펀치를 소개합니다. Facom 중심 펀치는 57-60 HRc까지 단단한 팁이 있는 단단한 강철로 만들어집니다. 스타일리쉬한 블랙과 레드로 마감되어 부식 방지 기능이 있는 긴 길이의 핀 펀치를 제공합니다. 파콤 중심 펀치는 드릴링 하기 전에 정밀하게 금속에 표시를 하거나 구멍을 뚫는 데 적합합니다. 기능 및 이점: 매트 크롬 마감 처리된 내구성 크롬-몰리브데늄 강철 안전성 향상을 위해 경량성과 내구성 인체공학적 손잡이가 있는 구조 15kg에서 25kg까지 조절 가능한 충격 자동적이고 사용이 간편한 스프링 충격 구동 메커니즘 경화 팁 57 - 60HRc 높은 정밀도로 금속에 들여쓰기나 구멍을 만듭니다. 일반 응용 프로그램:. 핀 및 중심 펀치는 드릴이 "원정"하지 않도록 드릴하기 전에 구멍의 중심을 표시하는 데 사용되는 수공구입니다. 가운데 펀치와 핀 펀치는 두 가지 옵션으로 제공됩니다. 해머를 사용하지 않고 작동하는 자동 스프링 로드 도구 건설사 전기 기술자 배관공 설치 정비사. FAQ:. ;나&g이 펀치는 무엇으로 만들어졌나요? ;/i> 이 센터 펀치는 내구성이 강한 고품질 강철로 매트 크롬 마감 처리되어 있습니다. 팁은 57-60HRc로 단단하여 정밀성, 내구성 및 고성능을 보장합니다. ;나&g이 펀치의 치수는 어떻게 됩니까? ;/i> Facom 257.G 중심 펀치의 길이는 140 mm입니다. 생크 지름은 16mm이고 팁 지름은 3.5mm입니다. ;나&g자동 또는 수동 핀 펀치입니까? ;/i> 충격 강도를 조절할 수 있는 자동 펀치입니다.
1 제품을 찾았습니다.
JPY: 8,990
USD: 56.35
-
RS PRO 회전 펀치 플라이어 2.5; 3. 3.5. 4. 4.5. 5밀리미터 445-8841
펀치 플라이어 한 공구(2.5, 3.0, 3.5, 4.0, 4.5, 5.0mm)에 6개의 구멍 크기를 가진 개스킷 소재 또는 가죽 제품에 구멍을 내는 회전 펀치 플라이어 펀치 인덱스 및 위치 잠금 PVC 커버 핸들이 있는 니켈로 코팅된 강철로 제조됨 사용하지 않을 때 도구가 닫혀 있음
1 제품을 찾았습니다.
JPY: 2,570
USD: 16.11
-
RS Pro 10 mm 펀치, 120 mm 467-6623
DIN 7250. 중앙 펀치, DIN 7250. 광택 핀 팔각형 그립 생크, 칠한 금. 크롬-바나듐 에어경화 강으로 만든 센터 펀치. 충격 헤드의 멀티 코팅은 사실상 치핑과 부기를 해결합니다.
1 제품을 찾았습니다.
JPY: 900
USD: 5.64
-
RS PRO 10 mm 전기 기술자 치젤 467-6639
DIN 7254; DIN 7255; DIN 7256. 치젤, 개인 은색 치젤 블레이드 8각형 그립 생크, 칠한 금. 크롬-바나듐 에어경화 강철로 만든 끌. 충격 헤드의 멀티 코팅은 사실상 치핑과 부기를 해결합니다.
1 제품을 찾았습니다.
JPY: 1,430
USD: 8.96
-
RS Pro 200g 카본 스틸 압착 해머, 300mm 707-3011
마그네틱 압정 해머. 단조 고탄소 공구용 스틸 히커리 핸들
1 제품을 찾았습니다.
JPY: 6,140
USD: 38.49
-
RS PRO 중형 탄소강 슬레지해머, 3.2kg 251-463
Sledge Hammer
7lb (3.17kg) general purpose heavy duty for builders and contractors Both striking faces are precision ground, especially hardened & heat-treated to withstand the highest impact Fitted with a 30in Hickory handle1 제품을 찾았습니다.
JPY: 19,000
USD: 119.10
-
RS PRO 5mm x 27피스 판각 펀치 세트(&, 글자: A → Z) 251-687
Punch for letters and numbers
Hand punch for engraving permanent identification mark Improves durability and achieves maximum safety Hardening and resistance processing Can be engraved on materials up to Rockwell hardness C scale 40 Sturdy plastic box included1 제품을 찾았습니다.
JPY: 9,850
USD: 61.74
-
RS PRO 6mm x 27피스 판각 펀치 세트(&, 글자: A → Z) 251-693
Punch for letters and numbers
Hand punch for engraving permanent identification mark Improves durability and achieves maximum safety Hardening and resistance processing Can be engraved on materials up to Rockwell hardness C scale 40 Sturdy plastic box included1 제품을 찾았습니다.
JPY: 13,600
USD: 85.25
-
RS PRO 4mm x 9 피스 판각 펀치 세트(0 → 8) 251-700
Punch for letters and numbers
Hand punch for engraving permanent identification mark Improves durability and achieves maximum safety Hardening and resistance processing Can be engraved on materials up to Rockwell hardness C scale 40 Sturdy plastic box included1 제품을 찾았습니다.
JPY: 2,910
USD: 18.24
-
RS PRO 1/8in x 113 피스 조각용 펀치 세트(블랭크(x12), 홀더, 개별 펀치(x100)) 251-716
Fount Punch Set
A set of 100 alpha-numeric characters (3 mm height) made from high quality hardened tool steel (characters hardened to 58-62 Rockwell C) to give clear, consistent marking throughout a long life1 제품을 찾았습니다.
JPY: 209,000
USD: 1,310.10
-
RS PRO 2.5mm x 27피스 판각 펀치 세트(&, 글자: A → Z) 251-722
Punch for letters and numbers
Hand punch for engraving permanent identification mark Improves durability and achieves maximum safety Hardening and resistance processing Can be engraved on materials up to Rockwell hardness C scale 40 Sturdy plastic box included1 제품을 찾았습니다.
JPY: 8,540
USD: 53.53
-
RS PRO 3mm x 27 조각 조각 펀치 세트(&, 글자: A → Z) 251-738
Punch for letters and numbers
Hand punch for engraving permanent identification mark Improves durability and achieves maximum safety Hardening and resistance processing Can be engraved on materials up to Rockwell hardness C scale 40 Sturdy plastic box included1 제품을 찾았습니다.
JPY: 8,300
USD: 52.03
-
RS PRO 8mm x 27피스 판각 펀치 세트(&, 글자: A → Z) 251-744
Punch for letters and numbers
Hand punch for engraving permanent identification mark Improves durability and achieves maximum safety Hardening and resistance processing Can be engraved on materials up to Rockwell hardness C scale 40 Sturdy plastic box included1 제품을 찾았습니다.
JPY: 18,200
USD: 114.09
-
RS PRO 2.5mm x 9 피스 판각 펀치 세트(0 → 9) 251-766
Punch for letters and numbers
Hand punch for engraving permanent identification mark Improves durability and achieves maximum safety Hardening and resistance processing Can be engraved on materials up to Rockwell hardness C scale 40 Sturdy plastic box included1 제품을 찾았습니다.
JPY: 2,790
USD: 17.49
-
RS PRO 3mm x 9 피스 판각 펀치 세트(0 → 9) 251-772
Punch for letters and numbers
Hand punch for engraving permanent identification mark Improves durability and achieves maximum safety Hardening and resistance processing Can be engraved on materials up to Rockwell hardness C scale 40 Sturdy plastic box included1 제품을 찾았습니다.
JPY: 2,790
USD: 17.49
-
RS PRO 6mm x 9 피스 판각 펀치 세트(0 → 9) 251-788
Punch for letters and numbers
Hand punch for engraving permanent identification mark Improves durability and achieves maximum safety Hardening and resistance processing Can be engraved on materials up to Rockwell hardness C scale 40 Sturdy plastic box included1 제품을 찾았습니다.
JPY: 4,430
USD: 27.77
-
RS PRO 8mm x 9 피스 판각 펀치 세트(0 → 9) 251-794
Punch for letters and numbers
Hand punch for engraving permanent identification mark Improves durability and achieves maximum safety Hardening and resistance processing Can be engraved on materials up to Rockwell hardness C scale 40 Sturdy plastic box included1 제품을 찾았습니다.
JPY: 5,950
USD: 37.30
-
RS PRO 4mm x 27피스 판각 펀치 세트(&, 글자: A → Z) 251-801
Punch for letters and numbers
Hand punch for engraving permanent identification mark Improves durability and achieves maximum safety Hardening and resistance processing Can be engraved on materials up to Rockwell hardness C scale 40 Sturdy plastic box included1 제품을 찾았습니다.
JPY: 8,300
USD: 52.03
-
RS 프로 앵글; 직선형 텅스텐 카바이드 팁 스크라이브 394-184
Tungsten Carbide
Engineered pattern straight or straight/angle-tipped scribe with carbide tip. The tungsten carbide tipped scribe is suitable for use in hard and abrasive materials, such as stainless steel, anodized aluminum, ceramic, and glass, where the sharpness of a typical HSS scribe can rapidly become dull.1 제품을 찾았습니다.
JPY: 3,350
USD: 21.00
-
RS PRO 직선 수납형 텅스텐 카바이드 팁 스크라이브 394-194
Stretchable Sharp Tip
Polished sharp double tip angle for precision work Stretchable spring road carbide scribe core scribe length adjustable (internally adjustable) High quality pen-style machined aluminum body pocket clip1 제품을 찾았습니다.
JPY: 24,800
USD: 155.46
-
RS 프로 앵글; 직선 알루미늄 스크라이브 394-201
Steel Scribe
Both of the scribe tips are hardened and resistant. Standard scribe with only one straight tip and double end scribe with one straight and one 90 ° curved tip are available. The scribe comes with a protective sleeve at the tip. Standard: Length 150, Diameter 4.3, Double End: Length 180, Diameter 6.51 제품을 찾았습니다.
JPY: 3,030
USD: 18.99
-
RS 프로 스트레이트 스틸 스크라이브 394-207
Steel Scribe
Both of the scribe tips are hardened and resistant. Standard scribe with only one straight tip and double end scribe with one straight and one 90 ° curved tip are available. The scribe comes with a protective sleeve at the tip. Standard: Length 150, Diameter 4.3, Double End: Length 180, Diameter 6.51 제품을 찾았습니다.
JPY: 1,280
USD: 8.02
-
RS PRO 5 피스 병렬 핀 펀치 세트 484-748
DIN 6450
5-Piece Set of Pin Punches1 제품을 찾았습니다.
JPY: 17,400
USD: 109.07
-
RS PRO 스틸 클로우 해머, 567g 537-007
Fibreglass Shaft Claw Hammer
20oz (570g) fibreglass shafted quality claw hammer with drop forged hardened and tempered steel head Fibreglass shafts aid in absorbing the shock vibrations, reducing user fatigue and offer high strength characteristics, being virtually unbreakable Fitted with a black rubber grip moulded directly onto the shaft1 제품을 찾았습니다.
JPY: 5,030
USD: 31.53
-
RS 프로동 Rawhide Mallet 1.1kg 539-097
Copper & Skin Double-ended Hammer
The head of the hammer is malleable cast iron, one side is made of copper, the other side is lined with highly compressed cow skin, and the handle is made of oblong ash wood. It can give a reliable and strong impact on the copper side, and the hard but elastic impact on the cow skin side, leaving no scar on the finish.1 제품을 찾았습니다.
JPY: 8,960
USD: 56.17
-
RS PRO 폴리에틸렌 말렛 320.0g 539-110
Plastic Hammer
Thorex Super Plastic Hammer The head made of polypropylene with a very high molecular weight is attached to the handle of ash wood. The head, which does not crack or peel, is secured safely with spark-resistant wooden and brass wedges. Durability and high wear resistance for very high impact strength Perfect for the manufacturing, service, and assembly industries where the hammer's striking surface does not change color and leaves no trace1 제품을 찾았습니다.
JPY: 4,840
USD: 30.34
-
RS PRO 나일론 말렛 450.0g(얼굴 교체 가능) 547-852
Soft Face Hammer
A soft face hammer that can deliver a strong blow without compromising material (such as polished or treated surfaces during assembly of panels or equipment) Two screw-on nylon faces with cellulose ash handles in all sizes Attached chrome-plated zinc head knurls prevent loosening of the face during use The nylon face is highly waterproof and resistant to embrittlement and harsh handling during blows. On the other side is a grey soft PVC face that is highly elastic and shock absorbent and can be used for more delicate and fragile parts.1 제품을 찾았습니다.
JPY: 4,840
USD: 30.34
-
RS 프로 나일론 대체 몰렛 페이스 547-868
Soft Face Hammer
A soft face hammer that can deliver a strong blow without compromising material (such as polished or treated surfaces during assembly of panels or equipment) Two screw-on nylon faces with cellulose ash handles in all sizes Attached chrome-plated zinc head knurls prevent loosening of the face during use The nylon face is highly waterproof and resistant to embrittlement and harsh handling during blows. On the other side is a grey soft PVC face that is highly elastic and shock absorbent and can be used for more delicate and fragile parts.1 제품을 찾았습니다.
JPY: 1,510
USD: 9.47
-
RS PRO PVC 교체 맬릿 페이스 547-874
Soft Face Hammer
A soft face hammer that can deliver a strong blow without compromising material (such as polished or treated surfaces during assembly of panels or equipment) Two screw-on nylon faces with cellulose ash handles in all sizes Attached chrome-plated zinc head knurls prevent loosening of the face during use The nylon face is highly waterproof and resistant to embrittlement and harsh handling during blows. On the other side is a grey soft PVC face that is highly elastic and shock absorbent and can be used for more delicate and fragile parts.1 제품을 찾았습니다.
JPY: 1,270
USD: 7.96
-
RS PRO 나일론 말렛 900.0g(얼굴 교체 가능) 600-795
Recoaction-Free Hammer ・ Soft Face Hammer with Die-Cast Aluminum Alloy Shock-Absorbing Rubber Grip and Two Easily Replaceable Screw-In Nylon Faces This Head Has a Sealed Cavity Containing Fine Metal Shots, When the Hammer Accelerates Forward, It Moves to the Back of the Cavity. During Impact, the Shots Move Forward to Resist the Maximum Impact of a Hard Hit and Prevent Bounce Back This Hammer Is Designed to Transmit a Hard Hit Without Hurting the Material or the User Typical Use: Assembly/Positioning of Precision Parts, Shaping Sheet Metal
1 제품을 찾았습니다.
JPY: 9,960
USD: 62.43
-
RS 프로 나일론 대체 몰렛 페이스 600-802
Nylon Face Hammer
Hollow head sealed hammer with built-in lead.Shock-absorbent rubber handle grip and screw-in nylon face ensure no damage to hammer surface.Replacement nylon face or even sturdier polyurethane face is available.1 제품을 찾았습니다.
JPY: 2,140
USD: 13.41
-
RS PRO 폴리우레탄 대체 맬릿 면 600-818
Nylon Face Hammer
Hollow head sealed hammer with built-in lead.Shock-absorbent rubber handle grip and screw-in nylon face ensure no damage to hammer surface.Replacement nylon face or even sturdier polyurethane face is available.1 제품을 찾았습니다.
JPY: 2,780
USD: 17.43
-
RS PRO 6 피스 스프링 핀 펀치 세트 600-896
Spring Tension Pin Punch
Each punch has been cured, resistant, and polished, and the body has been blackened and rolled.1 제품을 찾았습니다.
JPY: 7,580
USD: 47.52
