캐비닛 하드웨어
필터
-
RS PRO M4 스프링 플런저, 9.8mm 길이 478-567
Ball Spring Plunger
Ideal when a predetermined positioning pin is required or when positioning the workpiece relative to the reference surface is required1 제품을 찾았습니다.
JPY: 9,010
USD: 56.48
-
RS PRO M3 스프링 플런저, 7.5mm 길이 478-743
Ball Spring Plunger
Ideal when a predetermined positioning pin is required or when positioning the workpiece relative to the reference surface is required1 제품을 찾았습니다.
JPY: 8,080
USD: 50.65
-
RS PRO M5 스프링 플런저, 12.9mm 길이 478-917
Ball Spring Plunger
Ideal when a predetermined positioning pin is required or when positioning the workpiece relative to the reference surface is required1 제품을 찾았습니다.
JPY: 8,980
USD: 56.29
-
RS PRO M6 스프링 플런저, 15mm 길이 478-927
Ball Spring Plunger
Ideal when a predetermined positioning pin is required or when positioning the workpiece relative to the reference surface is required1 제품을 찾았습니다.
JPY: 830
USD: 5.20
-
RS PRO Steel Hasp & Staple, 153mm, 8mm 751-332
Heavy Duty Hasp ; Staple
Ideal for general utility services Heavy duty style has a square hole on the hinge flap that permits the use of a 5/16 in1 제품을 찾았습니다.
JPY: 1,170
USD: 7.33
-
RS PRO 스틸 해스프 & 스테이플 751-348
Heavy Duty Hasp ; Staple
Ideal for general utility services Heavy duty style has a square hole on the hinge flap that permits the use of a 5/16 in1 제품을 찾았습니다.
JPY: 1,280
USD: 8.02
-
스테인레스 스틸 천연 토글 래치, 25kgf Op.Tension, 50 x 22.4 x 12mm 197-4126
표시를 돕는 차원 드로잉입니다. 소형의 기본 아연 패시베이트/스테인리스 스틸. 경량용 어플리케이션 M4에 적합한 기본 소형 토글 래치 캐치 및 래치 25kgf 작동 장력 캐치에서 래치 거리 44mm
1 제품을 찾았습니다.
JPY: 2,560
USD: 16.05
-
측면 마운트 그래버 도어 래치, 22N 풀 C3-805-RS
그래버 도어 캐치 - 사이드 마운트. 캐치는 섬유 강화 나일론으로 제조되어 내구성이 강하고 내부식성이 뛰어납니다. 문/프레임에 나사 또는 리벳팅할 수 있습니다. 케이스 내부에 마운트를 장착합니다. Heavy Duty Keeper를 눌러 닫거나 잡아당겨 중앙 작업 위에 로드된 스프링을 엽니다. 세 개의 잡아당기는 힘으로 사용할 수 있습니다.
1 제품을 찾았습니다.
JPY: 2,390
USD: 14.98
-
Southco 분말 코팅 다이 캐스트 아연 블랙 잠금, 비잠금 핸들, 82.5mm E3-11-15-RS
해당하는 경우 2개의 키 T 핸들. 매트 블랙 파우더가 코팅된 다이캐스트 아연 손잡이 손잡이의 반 바퀴 손잡이는 도어를 잡고 꽉 잡아당겨 일정한 압력을 가해 개스켓팅 등을 압축합니다. 최대 6.4mm를 사용하여 EMI 또는 RFI 유형의 가스켓팅 재료 RS 부품 번호 압축 245-5654 245-5654 및 ; 340-2229 340-2229는 키형입니다. 245-5503 245-5503 및; 340-2178 340-2178은 T-핸들 비잠금
1 제품을 찾았습니다.
JPY: 10,900
USD: 68.33
-
아세탈, 스티렌 부타디엔 고무, 아연 합금 블랙 분말 코팅 토글 래치, 50lbf op.Tension, 57 x 19 x 96.6mm 19-14-10-RS
헤비 듀티 스웰 래치 다양한 프레임 두께로 장착 가능 도어와 프레임 사이의 정렬 불량을 수용합니다(최대). 도어 두께는 6.4mm) 유리, 금속 또는 플라스틱과 함께 사용하기에 적합 블라인드 응용 프로그램에 이상적이며 진동 저항성 다이 캐스트 구성입니다
1 제품을 찾았습니다.
JPY: 4,860
USD: 30.46
-
RS PRO 고무, 스테인레스 스틸 후드 래치 어셈블리 339-9151
RS Pro Hood 래치 어셈블리. RS Pro에서 이 후드 래치 어셈블리는 견고한 스테인레스 스틸 캐치 플레이트를 특징으로 하는 중용에서 중용에 이상적인 제품입니다. 래치 구성 요소는 클로로프렌 고무 구조로 되어 있으며 부동액이 추가되어 가혹하고 외부 환경에 적합합니다. 래치 구성 요소는 게이트와 프레임 사이의 덜컹거림을 방지하도록 고유하게 형성됩니다. 사용 편의성과 견고한 구성을 결합한 이 후드 래치 어셈블리는 다용도이며 견고합니다. 기능 및 이점 Removable Shaft 스테인레스 스틸 및 고무 구조 M4 고정 구멍
1 제품을 찾았습니다.
JPY: 5,290
USD: 33.16
-
강철, 아연 원통형 압착 캐치 E3-17-15-RS
부작용 인체공학적 손잡이입니다. 하우징과 손잡이는 흑색 파우더 코팅이있는 다이 캐스트 아연 합금입니다. 1/2 턴은 도어/패널을 걸어 단단히 당기는 데 필요한 모든 것입니다. EMI 또는 RFI 가스켓팅 재료에 최대 6.4mm의 압축을 적용하여 레틀 제거를 돕습니다. 조절가능한 그립 범위 2개 사용 가능 작동에 필요한 키 또는 특수 도구 없음
1 제품을 찾았습니다.
JPY: 6,890
USD: 43.19
-
스타인바흐 및 볼만 폴리아미드 블랙 록, 날개, 39mm 6719447
날개 손잡이 회전. 블랙 폴리아미드로 제조된 날개 손잡이와 하우징에는 아연 도금 스틸 혀 IP65 / NEMA4 밀봉 공급 완전 조립된 것이 있습니다. 그립 범위: 348-7113 - 13mm 348-7135 - 20mm 348-7141 - 26mm 348-7157 - 32mm
1 제품을 찾았습니다.
JPY: 2,460
USD: 15.42
-
RS PRO 스테인레스 스틸 스테인레스 스틸 Hasp & Staple, 90 x 36mm 434-9595
Hasp and Staple, 316 Stainless Steel. 316등급 스테인레스 강과 두 가지 크기로 제공 우수한 부식 방지 특성 식품, 화학 및 기타 '청정' 산업에서 사용하기에 이상적 스테인레스 스틸 고정 나사를 사용하여 완비
1 제품을 찾았습니다.
JPY: 2,400
USD: 15.04
-
RS PRO 스테인레스 스틸 게이트 래치 434-9624
304 스테인레스 스틸 게이트 래치. RS Pro에서 이 스테인리스 게이트 래치 어셈블리는 견고하고 신뢰할 수 있습니다. 자동 또는 중력의 게이트 래치는 자동으로 게이트가 닫히도록 잠그는 중력의 스냅 메커니즘을 사용할 수 있는 장점이 있습니다. 걸쇠를 풀기 위해 조작 가능한 엄지 스위치도 있다. 빠르고 쉽게 설치할 수 있도록 스테인레스 스틸 고정 나사를 완비한 이 래치는 정원 및 기타 야외 공간에 적합합니다. 기능 및 이점 자동 래치 견고한 구성 설치가 용이합니다. 크기. 받침 높이 48mm, 너비 37mm, 깊이 56mm 크랭크 스트라이커 바 길이 135mm
1 제품을 찾았습니다.
JPY: 3,490
USD: 21.88
-
아연 도금 마감 처리된 RS PRO 스틸 게이트 래치 436-0536
RS Pro 자동 게이트 래치 RS 프로에서 이 스테인레스 스틸 게이트 래치 어셈블리는 견고하고 신뢰할 수 있으며 추가 내구성을 위해 아연 도금된 마감을 가지고 있습니다. 자동 또는 중력의 게이트 래치는 자동으로 게이트가 닫히도록 잠그는 중력의 스냅 메커니즘을 사용할 수 있는 장점이 있습니다. 걸쇠를 풀기 위해 조작 가능한 엄지 스위치도 있다. 빠르고 쉽게 설치할 수 있도록 스테인레스 스틸 고정 나사를 완비한 이 래치는 정원 및 기타 야외 공간에 적합합니다. 기능 및 이점 자동 래치 견고한 구성 설치가 용이합니다. 크기. 받침 높이 56mm, 너비 63mm, 깊이 60mm 크랭크 스트라이커 바 길이 120mm
1 제품을 찾았습니다.
JPY: 1,470
USD: 9.22
-
아연 도금 마감 처리된 RS PRO 스틸 링 게이트 래치 436-0564
링 게이트 래치입니다. RS Pro에서 이 링 래치 어셈블리는 게이트를 안전하게 닫을 수 있는 간단하고 비용 효율적인 방법입니다. 링 래치 시스템은 단순히 링을 사용하여 래치를 캐치에서 들어올리는 방식으로 작동하며 게이트의 양쪽에서 작동할 수 있습니다. 이 견고한 링 래치는 아연 도금된 마감처리가 된 강철로 만들어졌습니다. 직선 래치가 있는 원형 링 게이트 아연 도금 강철 마감 래치 길이 7in. 내후성 견고한 공사
1 제품을 찾았습니다.
JPY: 3,650
USD: 22.88
-
스콰이어 스틸 파우더 코팅 도어 볼트, 120 x 50mm RSCOMBI-4
보안 나사. 콤비 볼트2 다이캐스팅 아연 합금으로 제조되며, 블랙 파우더 코트 마감처리 추가 보안을 위해 열린 위치와 닫힌 위치에서 잠금 가능 내부 및 외부 사용에 적합 10000개의 조합으로 복원 가능 바디 길이 120mm
1 제품을 찾았습니다.
JPY: 9,090
USD: 56.98
-
스틸 아연 도금 토글 래치, 67.6 x 22.6 x 12.7mm 726-4144
기본 후크 스타일 전환 래치 40.4mm 거리를 잡기 위해 연결 아연 도금 스틸 래치의 곡률로 인해 캐치 플레이트가 필요하지 않은 표준 토글 래치
1 제품을 찾았습니다.
JPY: 1,880
USD: 11.79
-
스틸 아연 도금 토글 래치, 400daN Op.Tension 726-4150
접시. 큰 아연 도금 강철 조정 래치 큰 아연 도금 강판 조정 가능한 토글 래치 나사 후크는 선 드로잉 최대 작동 장력 400 daN 영구 변형 전 최대 장력 600 daN에 표시된 대로 75에서 96 mm 사이의 치수 X를 갖는 캐치 플레이트와 조립될 때 작동 장력 35 daN으로 조립시 21mm의 조정 및 작동 후 개스켓의 재텐션을 가능하게 합니다
1 제품을 찾았습니다.
JPY: 6,740
USD: 42.25
-
RS PRO 스틸 자동 게이트 래치 894-6761
자동 게이트 래치 RS Pro에서 이 스틸 게이트 래치 어셈블리는 견고하고 신뢰할 수 있습니다. 자동 또는 중력의 게이트 래치는 자동으로 게이트가 닫히도록 잠그는 중력의 스냅 메커니즘을 사용할 수 있는 장점이 있습니다. 걸쇠를 풀기 위해 조작 가능한 엄지 스위치도 있다. 이 걸쇠는 정원 및 기타 야외 공간에 적합합니다. 기능 및 이점 자동 래칭 견고한 구성 간편한 설치
1 제품을 찾았습니다.
JPY: 1,320
USD: 8.27
-
RS PRO 스틸 링 게이트 래치(블랙 에폭시 마감 포함) 894-6765
링 게이트 래치, 블랙 RS Pro에서 이 링 래치 어셈블리는 게이트를 안전하게 닫을 수 있는 간단하고 비용 효율적인 방법입니다. 링 래치 시스템은 단순히 링을 사용하여 래치를 캐치에서 들어올리는 방식으로 작동하며 게이트의 양쪽에서 작동할 수 있습니다. 이 견고한 링 래치는 블랙 에폭시 스틸로 만들어졌습니다. 기능 및 이점 내후성 견고한 건축설계
1 제품을 찾았습니다.
JPY: 3,500
USD: 21.94
-
RS PRO 스틸 링 게이트 래치(블랙 에폭시 마감 포함) 894-6780
꼬인 링이 있는 RS 프로 링 게이트 래치. RS Pro에서 이 링 래치 어셈블리는 게이트를 안전하게 닫을 수 있는 간단하고 비용 효율적인 방법입니다. 링 래치 시스템은 단순히 링을 사용하여 래치를 캐치에서 들어올리는 방식으로 작동하며 게이트의 양쪽에서 작동할 수 있습니다. 이 견고한 링 래치는 블랙 에폭시 스틸로 만들어졌습니다. 내후성 견고한 건축 비틀림설계
1 제품을 찾았습니다.
JPY: 3,200
USD: 20.06
-
RS PRO M6 인덱스 플런저, 37mm 길이 237-384
Standard/Flat Plate Index Plunger
Standard type for positioning equipment within a certain range and flat plate type for fixing to a thin panel with screws or rivets Available with or without rest position. In the rest position type, the head can be rotated 90 degrees and fixed in the position where the plunger is contracted. It is made of burnish-finished steel, hard steel plunger and black knob made of plastic technopolymer. Flat plate made of galvanized steel1 제품을 찾았습니다.
JPY: 11,500
USD: 72.09
-
RS PRO M16 인덱스 플런저, 54mm 길이 237-388
Standard/Flat Plate Index Plunger
Standard type for positioning equipment within a certain range and flat plate type for fixing to a thin panel with screws or rivets Available with or without rest position. In the rest position type, the head can be rotated 90 degrees and fixed in the position where the plunger is contracted. It is made of burnish-finished steel, hard steel plunger and black knob made of plastic technopolymer. Flat plate made of galvanized steel1 제품을 찾았습니다.
JPY: 16,800
USD: 105.31
-
RS PRO M10 인덱스 플런저, 51mm 길이 237-390
Precision Index/Rest Position
For applications requiring precise positioning, such as curing plunger rotary index heads1 제품을 찾았습니다.
JPY: 22,500
USD: 141.04
-
RS PRO M12 인덱스 플런저, 61mm 길이 237-401
Precision Index/Rest Position
For applications requiring precise positioning, such as curing plunger rotary index heads1 제품을 찾았습니다.
JPY: 28,700
USD: 179.90
-
RS PRO M16 인덱스 플런저, 75.5mm 길이 237-407
Precision Index/Rest Position
For applications requiring precise positioning, such as curing plunger rotary index heads1 제품을 찾았습니다.
JPY: 37,000
USD: 231.93
-
RS PRO M20 인덱스 플런저, 69mm 길이 237-417
The index pin for this plunger may differ slightly from the illustration. Some products have a black oxidized finish for decoration only.
Cam Action Index Plunger1 제품을 찾았습니다.
JPY: 9,330
USD: 58.48
-
RS PRO M16 인덱스 플런저, 54mm 길이 237-429
Standard/Flat Plate Index Plunger
Standard type for positioning equipment within a certain range and flat plate type for fixing to a thin panel with screws or rivets Available with or without rest position. In the rest position type, the head can be rotated 90 degrees and fixed in the position where the plunger is contracted. It is made of burnish-finished steel, hard steel plunger and black knob made of plastic technopolymer. Flat plate made of galvanized steel1 제품을 찾았습니다.
JPY: 18,600
USD: 116.59
-
RS PRO M12 인덱스 플런저, 45mm 길이 237-491
Standard/Flat Plate Index Plunger
Standard type for positioning equipment within a certain range and flat plate type for fixing to a thin panel with screws or rivets Available with or without rest position. In the rest position type, the head can be rotated 90 degrees and fixed in the position where the plunger is contracted. It is made of burnish-finished steel, hard steel plunger and black knob made of plastic technopolymer. Flat plate made of galvanized steel1 제품을 찾았습니다.
JPY: 15,400
USD: 96.53
-
RS PRO M12 인덱스 플런저 237-564
Basic Index Plunger with Pull/Lift Ring Basic Index Plunger Galvanized Steel Body, Stainless Steel Plunger Small, Low-Cost Index Solution Not Suitable for Precision Index Applications
1 제품을 찾았습니다.
JPY: 20,500
USD: 128.50
-
RS PRO M12 인덱스 플런저, 45mm 길이 237-570
Standard/Flat Plate Index Plunger
Standard type for positioning equipment within a certain range and flat plate type for fixing to a thin panel with screws or rivets Available with or without rest position. In the rest position type, the head can be rotated 90 degrees and fixed in the position where the plunger is contracted. It is made of burnish-finished steel, hard steel plunger and black knob made of plastic technopolymer. Flat plate made of galvanized steel1 제품을 찾았습니다.
JPY: 18,600
USD: 116.59
-
RS PRO M8 인덱스 플런저, 44mm 길이 237-665
Standard/Flat Plate Index Plunger
Standard type for positioning equipment within a certain range and flat plate type for fixing to a thin panel with screws or rivets Available with or without rest position. In the rest position type, the head can be rotated 90 degrees and fixed in the position where the plunger is contracted. It is made of burnish-finished steel, hard steel plunger and black knob made of plastic technopolymer. Flat plate made of galvanized steel1 제품을 찾았습니다.
JPY: 10,700
USD: 67.07
-
RS PRO M6 인덱스 플런저 237-671
Basic Index Plunger with Pull/Lift Ring Basic Index Plunger Galvanized Steel Body, Stainless Steel Plunger Small, Low-Cost Index Solution Not Suitable for Precision Index Applications
1 제품을 찾았습니다.
JPY: 14,400
USD: 90.27
-
RS PRO M10 인덱스 플런저 237-687
Basic Index Plunger with Pull/Lift Ring Basic Index Plunger Galvanized Steel Body, Stainless Steel Plunger Small, Low-Cost Index Solution Not Suitable for Precision Index Applications
1 제품을 찾았습니다.
JPY: 18,800
USD: 117.85
-
RS PRO M8 인덱스 플런저 237-750
Basic Index Plunger with Pull/Lift Ring Basic Index Plunger Galvanized Steel Body, Stainless Steel Plunger Small, Low-Cost Index Solution Not Suitable for Precision Index Applications
1 제품을 찾았습니다.
JPY: 16,600
USD: 104.06
-
RS PRO M6 인덱스 플런저, 37mm 길이 237-760
Standard/Flat Plate Index Plunger
Standard type for positioning equipment within a certain range and flat plate type for fixing to a thin panel with screws or rivets Available with or without rest position. In the rest position type, the head can be rotated 90 degrees and fixed in the position where the plunger is contracted. It is made of burnish-finished steel, hard steel plunger and black knob made of plastic technopolymer. Flat plate made of galvanized steel1 제품을 찾았습니다.
JPY: 12,400
USD: 77.73
-
RS PRO M10 인덱스 플런저, 51mm 길이 237-766
Precision Index/Rest Position
For applications requiring precise positioning, such as curing plunger rotary index heads1 제품을 찾았습니다.
JPY: 35,300
USD: 221.28
-
RS PRO M8 인덱스 플런저, 46mm 길이 237-772
Standard/Flat Plate Index Plunger
Standard type for positioning equipment within a certain range and flat plate type for fixing to a thin panel with screws or rivets Available with or without rest position. In the rest position type, the head can be rotated 90 degrees and fixed in the position where the plunger is contracted. It is made of burnish-finished steel, hard steel plunger and black knob made of plastic technopolymer. Flat plate made of galvanized steel1 제품을 찾았습니다.
JPY: 14,400
USD: 90.27
