금속수리제
필터
-
-
-
강금속 보수재용 희석제
주로 알루미늄으로 구성된 원팩 타입의 강금속 보수재로서 희석제로 희석한 후 사용한다.
경화되면, 그것은 금속처럼 되고, 금속 광택을 내기 위해 절단되고, 뚫고, 광택이 날 수 있습니다.1 제품을 찾았습니다.
JPY: 1,900
USD: 11.82
-
-
-
내열성 보수제 메탈릭 패티 200g 16324
It is a metal repair agent for high heat resistance applications that can be used for metal products such as aluminum and stainless steel products that require heat resistance.
Polishing produces a stainless-steel metallic luster.1 제품을 찾았습니다.
JPY: 18,800
USD: 116.97
-
내화학성 라이닝 물질 EC7000AR 2갤런 12750
Chemical resistant corrosion resistant lining material with excellent sulfuric acid, hydrochloric acid and nitric acid resistance in two-liquid mixing type.
It also exerts excellent effects on concentrated sulfuric acid and hydrochloric acid.1 제품을 찾았습니다.
JPY: 244,000
USD: 1,518.17
-
EC 프라이머 2Kg 207061
Primer for EC7000AR, safe zone (AS-150, AS-2500).
Can be used on concrete, mortar, metal and wood.1 제품을 찾았습니다.
JPY: 27,500
USD: 171.11
-
-
-
UW450g 16800
Underwater construction and underwater hardening putty.
Filling holes in pipes and other mechanical parts such as flanges, repairing cracks, regenerating corroded parts, and filling are possible.1 제품을 찾았습니다.
JPY: 17,700
USD: 110.13
-
-
HR 수퍼 3000 500g HRS3000
Suitable for repairing areas affected by heat cycles.
Use together with attached glass tape to increase strength at high temperature and pressure.1 제품을 찾았습니다.
JPY: 69,700
USD: 433.67
-
-
-
첫 번째 세트 스틸 패티 454g EA3473 219293
It is a repair agent containing epoxy steel, and it can be cured and restored in about 10 minutes.
For steel, cast iron, stainless steel, concrete, aluminum, copper, etc.1 제품을 찾았습니다.
JPY: 9,940
USD: 61.85
-
-
-
스테인레스 스틸 복구 퍼티 900g EA934RX-1
Molding repair of defects, wear, and breakage. Repair of leaks in pipes, tanks and valves. For repairing metals, PVC, castings, plastics, concrete, etc.
Solvent-free type on high-viscosity putty suitable for filling holes, cracks, nests of castings, joints, etc., filling holes, or film thickness lining. (A rubber spatula or a gold trowel will be used for the construction.)1 제품을 찾았습니다.
JPY: 30,000
USD: 186.66
-
철분 수리 퍼티(내마모성 및 내충격성) 500g EA934WC-17
Long curing time and excellent impact resistance.
It hardens in water and on wet surfaces.1 제품을 찾았습니다.
JPY: 27,920
USD: 173.72
-
빨리 고치기 글루2 1019
Holes, cracks and chips can be easily and strongly repaired.
If you pour liquid (polymer liquid adhesive) and powder (welding powder) on it, it will cure in about 10 seconds (24 hours if secondary processing is required).1 제품을 찾았습니다.
JPY: 7,000
USD: 43.55
-
-
-
다중 복구 퍼티 1161
It does not require any special equipment or technology, just by mixing the main agent and the curing agent, it can be cured like a metal, and it can be easily filled in the hole, filled in the nest, plated, glued and repaired.
After complete curing, holes, threads, polishing, painting, etc. can be added, and since it is an electrically defective conductor, electrical corrosion does not occur even when repair between dissimilar metals is performed.1 제품을 찾았습니다.
JPY: 10,500
USD: 65.33
-
고성능 내마모성 아강트 노드백 2574389
High performance epoxy resin with large ceramic beads and micro silicone carbide can handle up to 121°C and protect against sliding wear.
It is the type not applicable to poison drama.1 제품을 찾았습니다.
JPY: 131,000
USD: 815.08
-
고성능 내마모성 제제 노드백 2604614
Poisonous and deleterious substances are not applicable.
Excellent protection against corrosion and erosion.1 제품을 찾았습니다.
JPY: 145,000
USD: 902.19
-
JAPAN DURMETAL COLDWELDING SYSTEM, LTD.
작업 키트 BM-025AC
The Velometal Action Kit 250 g consists of two agents each of super rapid and standard types. One is a base agent with a high content of selected special steel and other metal molecules, and the other is an active agent containing a high content of aluminum ultrafine particles.
The chemical reaction occurs when these two agents are mixed well in a one-to-one volume ratio. The Super Rapid product cures in about 3 minutes at 20°C, and the Standard product cures in about 3 hours at 20°C.1 제품을 찾았습니다.
JPY: 123,180
USD: 766.43
-
-
-
-
-
-
금속 보수용 접착제 DV10130J
It is putty-like and can fill holes in pipes and other mechanical parts such as flanges, repair cracks, regenerate corroded parts, and plate.
After curing, it can be machined, perforated and tapped.1 제품을 찾았습니다.
JPY: 104,000
USD: 647.09
-
-
-
금속 보수용 접착제 DV10710J
It can be filled, bonded and repaired to various equipment.
For making various jigs and taking shapes.1 제품을 찾았습니다.
JPY: 11,700
USD: 72.80
-
-
메탈 스틱 퍼티 80g EA934AD-1
Filling dents in automobiles, repairing screw holes in machine tools, repairing pipe connections and cracks, and bonding and repairing various metals. *Does not adhere to difficult-to-adhere materials such as polyethylene, polypropylene, nylon, silicone resin, fluororesin, and soft PVC.
1 제품을 찾았습니다.
JPY: 4,050
USD: 25.20
-
메탈릭 퍼티 200g EA934DB-5
If it is even buffed, it will give a stainless steel look.
1 제품을 찾았습니다.
JPY: 19,400
USD: 120.71
-
