Snap-on Tools Japan K.K.

시트 옷 TOP Corporation 나사 크기: 3/8 24 조정 범위(인치): 0.001.Red 점보

Snap-on Tools Japan K.K.

카운터 싱크 적분 파일럿 유효 블레이드 직경(인치): 3/32 블레이드 수:3

Snap-on Tools Japan K.K.

카운터 싱크 통합 파일럿 세트 3/32, 1/8, 5/32, 3/16　ATI420D-4PC

NATO stock number.
High concentric quality achieved by carving.

TRUSCO NAKAYAMA CORPORATION

나이스 맨 G 티타늄 코팅 유효 블레이드 직경: 15 생크 지름:6

카운터 싱크 Ti 코트 팁 각도: 90 유효 블레이드 지름: 6.3

TRUSCO NAKAYAMA CORPORATION

카운터 싱크 셋 티 코트 6 셋 티타늄 코팅 6.3, 8.3, 10.4, 12.4, 16.5, 20.5　TSCSC

High Speed Steel is used as the base material and has excellent wear and heat resistance.
Surface hardness is high by surface titanium coating treatment, and heat and wear resistance and sharpness are improved compared with high speed.

TRUSCO NAKAYAMA CORPORATION

8mm용 카운터 싱크 수동 핸들

Walter Japan KK

카운터 싱크 Ti 코트 팁 각도: 90 유효 블레이드 지름: 6.3

NOGAJAPAN Ltd.

카운터 싱크 세트 3 블레이드 Ti 코팅 팁 각도: 90. 3, 10. 4, 16. 5, 25. 0　CJ5154T

Heat treated high speed steel is bladed with CBN polishing.
It is a deep and sharp cutting edge.

NOGAJAPAN Ltd.

카운터 싱크 세트 3 블레이드 Ti 코팅 팁 각도: 90 위 6.3, 위 8.3, 위 10.4, 위 16.5, 위 20.5　CJ6152T

Heat treated high speed steel is bladed with CBN polishing.
It is a deep and sharp cutting edge.

ILIX Prazisionswerkzeuge GmbH

카운터 싱크 세트 4 세트 DLC 코팅 위16.5, 20.5, 25.0, 37.0　6277-LSDC

Excellent adhesion prevention and low friction characteristic of DLC (Diamond-Like Carbon Coat) allows for excellent efficiency and finish surface processing.
Work Material: Aluminum Alloy/Copper Alloy.

Walter Japan KK

카운터 싱크 팁 각도: 90 유효 블레이드 지름: 4.3

TRUSCO NAKAYAMA CORPORATION

카운터 싱크 코발트 HSS 팁 각도: 90 유효 블레이드 지름: 6.3

TRUSCO NAKAYAMA CORPORATION

카운터 싱크 코발트 HSS 세트 6 Non-coating Ø6.3, 8.3, 10.4, 12.4, 16.5, 20.5　TSCS

Uses cobalt high speed steel as the base material and has excellent wear and heat resistance.
With the use of 3 blades, the cutting powder is well drained and the finish is beautiful.

NOGAJAPAN Ltd.

카운터 싱크 코발트 HSS 3개 블레이드 팁 각도: 90 유효 블레이드 지름: 6.3

NOGAJAPAN Ltd.

초경합금 카운터 싱크 3 블레이드 팁 각도: 90 유효 블레이드 지름: 6.3

ONISHI MANUFACTURING Co., Ltd.

드릴 홈 길이 15 유효 블레이드 지름의 육각 축 드릴 커터: 9.0

ONISHI MANUFACTURING Co., Ltd.

드릴(L 15mm) 3.0mm에서만 드릴 커터

STAR-M Corporation

HSS 모따기 커터 팁 각도: 90 유효 블레이드 지름:6

YAMAWA MFG. Co., Ltd.

HSS(카운터 싱크) 팁 각도: 90 유효 블레이드 지름:6

RUKO

육각 생크 카운터 싱크 비코트 팁 각도: 90 유효 블레이드 지름: 6.3

RUKO

육각 생크 카운터 싱크 Ti 코트 팁 각도: 90 유효 블레이드 지름: 6.3

Fukudaseiko

SKH51 팁 각도 가운데 재생: 60 유효 블레이드 지름:6

Walter Japan KK

DIN 6535 HA 어댑터 AK610.Z12.E12.022

Walter Japan KK

HSS 카운터 싱커 E681812.5

Walter Japan KK

HSS 카운터 싱커 E6819TIN10

Walter Japan KK

HSS 카운터 싱커 E781816

RUKO

카운터싱크 "빠른 시트" 티타늄 알루미늄 19.0mm

RUKO

카운터 싱크 "빠른 시트" 23.0mm

MAPAL KK

MEGA-Countersink(CDS110) 무균분 3 블레이드　COS110-0630-335C-SP345

The use of unequal split blades (patent pending) greatly reduces cutting resistance and prevents burrs and thread collapse.
Suppresses vibration and improves surface roughness and roundness.

MAPAL KK

MEGA-Countersink(CDS110) 무균분 3 블레이드　COS110-1040-335C-SP345

The use of unequal split blades (patent pending) greatly reduces cutting resistance and prevents burrs and thread collapse.
Suppresses vibration and improves surface roughness and roundness.

MAPAL KK

MEGA-Countersink(CDS110) 무균분 3 블레이드　COS110-1650-335C-SP345

The use of unequal split blades (patent pending) greatly reduces cutting resistance and prevents burrs and thread collapse.
Suppresses vibration and improves surface roughness and roundness.

MAPAL KK

MEGA-Countersink(CDS110) 무균분 3 블레이드　COS110-2050-335C-SP345

The use of unequal split blades (patent pending) greatly reduces cutting resistance and prevents burrs and thread collapse.
Suppresses vibration and improves surface roughness and roundness.

MAPAL KK

MEGA-Countersink(CDS110) 무균분 3 블레이드　COS110-2500-335C-SP345

The use of unequal split blades (patent pending) greatly reduces cutting resistance and prevents burrs and thread collapse.
Suppresses vibration and improves surface roughness and roundness.

MAPAL KK

MEGA-Countersink(CDS110) 무균분 3 블레이드　COS110-6.3-25-335C-SP345-SET

The use of unequal split blades (patent pending) greatly reduces cutting resistance and prevents burrs and thread collapse.
Suppresses vibration and improves surface roughness and roundness.

TRUSCO NAKAYAMA CORPORATION

Counter Sink Cobalt HSS 4.3mm　TCS43

Uses cobalt high speed steel as the base material and has excellent wear and heat resistance.
With the use of 3 blades, it has a beautiful finish with good powder removal.

TRUSCO NAKAYAMA CORPORATION

카운터싱크 티타늄 질화물 알루미나 코팅 10.4mm　TCSA104

The use of 3 blades for the cutting edge shape makes it easy to remove chips and gives a beautiful finish.
The surface titanium nitride alumina coating process significantly improves cutting speed and abrasion resistance compared to conventional titanium coatings.

TRUSCO NAKAYAMA CORPORATION

카운터싱크 티타늄 질화물 알루미나 코팅 12.4mm　TCSA124

The use of 3 blades for the cutting edge shape makes it easy to remove chips and gives a beautiful finish.
The surface titanium nitride alumina coating process significantly improves cutting speed and abrasion resistance compared to conventional titanium coatings.

TRUSCO NAKAYAMA CORPORATION

카운터싱크 티타늄 질화물 알루미나 코팅 16.5mm　TCSA165

The use of 3 blades for the cutting edge shape makes it easy to remove chips and gives a beautiful finish.
The surface titanium nitride alumina coating process significantly improves cutting speed and abrasion resistance compared to conventional titanium coatings.

TRUSCO NAKAYAMA CORPORATION

카운터싱크 티타늄 질화물 알루미나 코팅 20.5mm　TCSA205

The use of 3 blades for the cutting edge shape makes it easy to remove chips and gives a beautiful finish.
The surface titanium nitride alumina coating process significantly improves cutting speed and abrasion resistance compared to conventional titanium coatings.