Fukudaseiko

핸들 (45 ° Ø10 × 블레이드 길이 3.0 × 넥 지름이 있는 각도 커터 4)

Fukudaseiko

핸들 (60 ° Ø10 × 블레이드 길이 5.2 × 넥 지름이 있는 각도 커터 4)

Fukudaseiko

T Slot Endmill (HSS, × 블레이드 길이 5 × 넥 지름: 6.0)

FUJIGEN KOGYO Co., Ltd.

Nicecut용 Arm (음수 S형, 3피스)　AMNS-03

The machining type can be changed by replacing the arm.
Face milling.

FUJIGEN KOGYO Co., Ltd.

Nicecut용 Arm (음수 S형, 6피스)　AMNS-06

The machining type can be changed by replacing the arm.
Face milling.

FUJIGEN KOGYO Co., Ltd.

Nicecut용 Arm(네거티브 T 타입, 3피스)　AMNT-03

The machining type can be changed by replacing the arm.
Face milling.

FUJIGEN KOGYO Co., Ltd.

Nicecut용 Arm(네거티브 T 타입, 6피스)　AMNT-06

The machining type can be changed by replacing the arm.
Face milling.

FUJIGEN KOGYO Co., Ltd.

에어로밀(Aero Mill)(산크()　ARN12-30S

The use of a small diameter shank makes it suitable for use in low-stiffness machines.
By using different negative and positive types of machining work, it is possible to machine under more optimal conditions.

FUJIGEN KOGYO Co., Ltd.

에어로 밀(Aero Mill)(산크()　ARN16-40S

The use of a small diameter shank makes it suitable for use in low-stiffness machines.
By using different negative and positive types of machining work, it is possible to machine under more optimal conditions.

FUJIGEN KOGYO Co., Ltd.

에어로 밀(Aero Mill)("생크" 12, 머시닝 다이아믹 위", "포지티브 타입")　ARP12-30S

The use of a small diameter shank makes it suitable for use in low-stiffness machines.
By using different negative and positive types of machining work, it is possible to machine under more optimal conditions.

FUJIGEN KOGYO Co., Ltd.

에어로 밀(Aero Mill)("생크"16, 머시닝 다이아믹 위", "포지티브 타입")　ARP16-40S

The use of a small diameter shank makes it suitable for use in low-stiffness machines.
By using different negative and positive types of machining work, it is possible to machine under more optimal conditions.

FUJIGEN KOGYO Co., Ltd.

토크 렌치(T-20)　BT-20

Used to attach the clamp screw to the cutter.

FUJIGEN KOGYO Co., Ltd.

클램프 부품 세트　CL-1S

Used to attach the chip to the cutter.

FUJIGEN KOGYO Co., Ltd.

NICUT용 캡볼트　CP6-15

Used to attach the arm to the cutter.

FUJIGEN KOGYO Co., Ltd.

밀링 커터(8R - 10R)　DC32-40ALR

By replacing the chip, corner R shoulder machining from corner R5 to R10 is easy.
The long shank type uses a different material for the cutter body to increase its rigidity.

FUJIGEN KOGYO Co., Ltd.

밀링 커터(8R - 10R, 긴 유형)　DC32-40ALRL

By replacing the chip, corner R shoulder machining from corner R5 to R10 is easy.
The long shank type uses a different material for the cutter body to increase its rigidity.

FUJIGEN KOGYO Co., Ltd.

밀링 커터(5R - 7R)　DC32-40ASR

By replacing the chip, corner R shoulder machining from corner R5 to R10 is easy.
The long shank type uses a different material for the cutter body to increase its rigidity.

FUJIGEN KOGYO Co., Ltd.

밀링 커터(5R - 7R, 긴 유형)　DC32-40ASRL

By replacing the chip, corner R shoulder machining from corner R5 to R10 is easy.
The long shank type uses a different material for the cutter body to increase its rigidity.

FUJIGEN KOGYO Co., Ltd.

렌치(육각형 3mm)　K3

Used to attach the chip to the cutter.

FUJIGEN KOGYO Co., Ltd.

렌치(육각형 5mm)　K-5

Used to attach the chip to the cutter.

FUJIGEN KOGYO Co., Ltd.

토크 렌치(T-9)　MA-1

Used to attach the chip to the cutter.

FUJIGEN KOGYO Co., Ltd.

토크 렌치(T-15)　N-6

Used to attach the chip to the cutter.

FUJIGEN KOGYO Co., Ltd.

밀링 커터(시리린, 2개의 블레이드, 생크 위16, 머시닝 지름 위20)　NC2-1620

High feed and high-speed cutting with multiple blades is possible.
Excellent in shoulder grinding and grooving.

FUJIGEN KOGYO Co., Ltd.

밀링 커터(시리린, 3개의 블레이드, 생크 로 25, 머시닝 지름 위 30)　NC3-2530

High feed and high-speed cutting with multiple blades is possible.
Excellent in shoulder grinding and grooving.

FUJIGEN KOGYO Co., Ltd.

밀링 커터(시리린, 4개의 블레이드, 생크 조32, 가공직경 조40)　NC4-3240

High feed and high-speed cutting with multiple blades is possible.
Excellent in shoulder grinding and grooving.

FUJIGEN KOGYO Co., Ltd.

밀링 커터(시리린, 5개의 블레이드, 생크 로 32, 머시닝 지름 위 50)　NC5-3250

High feed and high-speed cutting with multiple blades is possible.
Excellent in shoulder grinding and grooving.

FUJIGEN KOGYO Co., Ltd.

밀링커터(SUKATCUT, Shank Ø32, 머시닝 지름 Ø40)　NK9040T

Uses a unique mechanism to achieve right-angle accuracy after machining.
Due to the negative tip, 6 corners can be used on both sides.

FUJIGEN KOGYO Co., Ltd.

밀링커터(SUKATCUT, Shank Ø20, 머시닝 지름 Ø40)　NK9040T-20

Uses a unique mechanism to achieve right-angle accuracy after machining.
Due to the negative tip, 6 corners can be used on both sides.

FUJIGEN KOGYO Co., Ltd.

밀링커터(SUKATCUT, Shank Ø32, 머시닝 지름 Ø50)　NK9050T

Uses a unique mechanism to achieve right-angle accuracy after machining.
Due to the negative tip, 6 corners can be used on both sides.

FUJIGEN KOGYO Co., Ltd.

밀링커터(SUKATCUT, Shank Ø20, 머시닝 지름 Ø50)　NK9050T-20

Uses a unique mechanism to achieve right-angle accuracy after machining.
Due to the negative tip, 6 corners can be used on both sides.

FUJIGEN KOGYO Co., Ltd.

밀링커터(SUKATCUT, Shank Ø32, 머시닝 지름 Ø60)　NK9060T

Uses a unique mechanism to achieve right-angle accuracy after machining.
Due to the negative tip, 6 corners can be used on both sides.

FUJIGEN KOGYO Co., Ltd.

밀링커터(SUKATCUT, Shank Ø32, 머시닝 지름 Ø70)　NK9070T

Uses a unique mechanism to achieve right-angle accuracy after machining.
Due to the negative tip, 6 corners can be used on both sides.

FUJIGEN KOGYO Co., Ltd.

밀링커터(SUKATCUT, Shank Ø32, 머시닝 지름 Ø80)　NK9080T

Uses a unique mechanism to achieve right-angle accuracy after machining.
Due to the negative tip, 6 corners can be used on both sides.

FUJIGEN KOGYO Co., Ltd.

밀링 커터(니코트, 3개의 블레이드, 조100, S형)　NKN32-100S-03

The machining diameter can be changed by replacing the base, and the machining type can be changed by replacing the arm.
Face milling.

FUJIGEN KOGYO Co., Ltd.

밀링 커터(니코트, 3개의 블레이드, 위110, T형)　NKN32-110T-03

The machining diameter can be changed by replacing the base, and the machining type can be changed by replacing the arm.
Face milling.

FUJIGEN KOGYO Co., Ltd.

밀링 커터(니코트, 3개의 블레이드, 조130, S형)　NKN32-130S-03

The machining diameter can be changed by replacing the base, and the machining type can be changed by replacing the arm.
Face milling.

FUJIGEN KOGYO Co., Ltd.

밀링 커터(니코트(NICECUT), 3개의 블레이드, 위140, T형)　NKN32-140T-03

The machining diameter can be changed by replacing the base, and the machining type can be changed by replacing the arm.
Face milling.

FUJIGEN KOGYO Co., Ltd.

밀링 커터(수미코, 생크 25, 머시닝 지름 위 30, 2.5 R - 5R)　SK25-30ALR

Nose R is R0.5 to R5.
The outer blade has a back taper and can be used mainly in the corner R and bottom R.

FUJIGEN KOGYO Co., Ltd.

밀링 커터(수미코, 생크 25, 머시닝 지름 위 30, 2.5 R - 5R, Long Type)　SK25-30ALRL

Nose R is R0.5 to R5.
The outer blade has a back taper and can be used mainly in the corner R and bottom R.

FUJIGEN KOGYO Co., Ltd.

밀링커터(수미코, 생크 25, 머시닝 지름 위 30, 2.5R 이하)　SK25-30ASR

Nose R is R0.5 to R5.
The outer blade has a back taper and can be used mainly in the corner R and bottom R.