OSG SYSTEM PRODUCTS

비선 막대형 코터 선택롤러 L 60 마스터　L60T

It is a one-piece molding with no wire wrapped around it, so there is no breaking or loosening.
It is resistant to clogging and has excellent washability.

ACTIVE

스핀 코터용 샘플 스탠드 (적합한 기판 크기 )

필름 두께 측정기

미니 테스트 70

필름 두께 측정기

건식용 도막 두께 측정 장치　455

By cutting the coating surface with a chip with a fixed angle and observing the cut edge with a microscope, the coating thickness can be easily measured.
Suitable for measuring various materials such as iron, non-iron, resin, wood, concrete and pottery.

건식교체팁 제1호의 필름두께 측정장치　

건식교체용 팁(Tip) 4번 필름의 두께 측정장치　

건식교체팁 제5호의 필름두께 측정장치　

건식교체팁 6호의 필름두께 측정장치　

JFE Advantech

Ultrasonic Thickness Gauge

JFE Advantech

Ultrasonic Thickness Gauge with English Calibration Certificate　TI-70L

Measurements can be made only by touching the probe from one side, and thickness can be measured non-destructively.
It can be used immediately by adjusting the zero point and sound speed.

JFE Advantech

Ultrasonic Thickness Gauge with Chinese Calibration Certificate　TI-70L

Measurements can be made only by touching the probe from one side, and thickness can be measured non-destructively.
It can be used immediately by adjusting the zero point and sound speed.

JFE Advantech

Ultrasonic Thickness Gauge with English Calibration Certificate　TI-70K

Measurements can be made only by touching the probe from one side, and thickness can be measured non-destructively.
It can be used immediately by adjusting the zero point and sound speed.

JFE Advantech

Ultrasonic Thickness Gauge with Chinese Calibration Certificate　TI-70K

Measurements can be made only by touching the probe from one side, and thickness can be measured non-destructively.
It can be used immediately by adjusting the zero point and sound speed.

ACTIVE

스핀 코터 ACT-220AII (메인 유닛)

ACTIVE

스핀 코터 ACT-220AII 진공펌프(기판 흡입용)

FICHER INSTRUMENTS

포켓형 소형필름두께측정기 내장형 탐침형

FICHER INSTRUMENTS

Pocketable Small Film Thickness Meter Integrated Probe Type USB Connection with English Calibration Certificate　DUALSCOPEMP0R-FP

Both electromagnetic and eddy current (automatic switching) type.
The eddy current method is suitable for measuring non-magnetic coatings on non-magnetic metals (anodized aluminum, Cu, stainless steel insulating coatings, paint, etc.).

FICHER INSTRUMENTS

Pocketable Small Film Thickness Meter Integrated Probe Type USB Connection with Chinese Calibration Certificate　DUALSCOPEMP0R-FP

Both electromagnetic and eddy current (automatic switching) type.
The eddy current method is suitable for measuring non-magnetic coatings on non-magnetic metals (anodized aluminum, Cu, stainless steel insulating coatings, paint, etc.).

클램프 254 x 355mm 유리 테이블　10x14

It is a glass table for coating with an applicator or barcoater.
It has a clamp so you can pinch the specimen.

무선 바코터 접근 와76.2μm

바코터 접근 와76.2μm

TQC Sheen

Wet Film Thickness Gauge　LD2030

The gauge is applied vertically on the undried paint film and the film thickness is measured by reading where the paint is applied.

TQC Sheen

Square wet film thickness gauge measuring range: 20 ~ 370 micrometers

TQC Sheen

Wet film thickness measuring instrument measuring range: 0 ~ 100 micrometers

FIB Sample Table for Sample Preparation Fine Grid Molybdenum 25 Pieces

A&D

Dual Type Film Thickness Gauge　AD-3256

This measuring instrument can measure the thickness of paint on automobiles and bridges.
It automatically identifies the metal to be measured and measures it using the appropriate measurement method (Electromagnetic induction type, eddy current type).

A&D

Battery lid

A&D

Dual Type Film Thickness Gauge with General Calibration　AD3256-00A00

It comes with a general calibration certificate.
This measuring instrument can measure the thickness of paint on automobiles and bridges.

EPK

전자파두께측정기 스마트테스트 F2.6

EPK

자기 흡인형 막두께계 마이크로 테스트 G6

CUSTOM corporation

TG-01U용 보정 플레이트 세트

SANKO ELECTRONIC LABOLATORY CO., LTD.

Integral Dual use Film Thickness Meter Single Function type with English Calibration Certificate　SAMAC-FN

Base metal is automatically discriminated and measured.
Can be measured in the dark with the back light.

SANKO ELECTRONIC LABOLATORY CO., LTD.

Integral Dual use Film Thickness Meter Single Function type with Chinese Calibration Certificate　SAMAC-FN

Base metal is automatically discriminated and measured.
Can be measured in the dark with the back light.

SANKO ELECTRONIC LABOLATORY CO., LTD.

Integral Dual use Film Thickness Meter high Function type with English Calibration Certificate　SAMAC-PRO

Base metal is automatically discriminated and measured.
Can be measured in the dark with the back light.

SANKO ELECTRONIC LABOLATORY CO., LTD.

Integral Dual use Film Thickness Meter high Function type with Chinese Calibration Certificate　SAMAC-PRO

Base metal is automatically discriminated and measured.
Can be measured in the dark with the back light.

SANKO ELECTRONIC LABOLATORY CO., LTD.

Integrated Electromagnetic Coating Thickness Gauge with English Calibration Certificate　SAMAC-F

simple film thickness gauge
shipbuilding industry

SANKO ELECTRONIC LABOLATORY CO., LTD.

Integrated Electromagnetic Coating Thickness Gauge with Chinese Calibration Certificate　SAMAC-F

simple film thickness gauge
shipbuilding industry

A&D

초음파 두께 측정기　AD-3255

1개의 장치는 0.8 ~ 300mm의 넓은 측정 범위를 덮습니다.
넓은 범위에서 최소 두께를 측정하는 스캔 모드