[드라이버 유형] 추출기 121mm　EA584AG-21

Since the iron core of φ10 mm is penetrated, the impact of the hammer is transmitted to the tip as it is.
With bolsters, high torque is output by using wrenches, etc.

121mm 교환 가능한 드라이버 핸들　EA584AG-22

Since the iron core of φ10 mm is penetrated, the impact of the hammer is transmitted to the tip as it is.
Driver bits with a bit depth of 33 mm and a total length of 50 mm or more can be used.

나사 추출기 세트 M5 - M16　EA584BD

A sturdy chrome vanadium screw extractor.
You can drill a hole in the center of the broken bolt and pull the bolt out by screwing a suitably sized extractor in the counterclockwise direction.

나사 추출기 3/8 "

탭 집합(HSS) M3 - M12　EA683PF

Smooth tapping is possible with steam oxidation treatment on the surface.
Each Size (Tip, Medium, Finishing) Contains 3 Pieces

Straight Drill(HSS) 1.0 -10.0mm/10개/세트

Straight Drill(CO-HSS) 1.0 -10.0mm/19개 조각 세트

교차 드릴(도자기 타일용) 9.0mm

SDS Plus 드릴 비트(Hard Stone용) 11.0 x 166mm　EA810MF-11

Uses cemented carbide chips suitable for hard stone materials and has excellent cutting and durability.
Holes close to a round circle can be drilled, making positioning easier.

육각 샤프트 드릴 비트 10.0 x 280mm

280mm의 끌축(16진수 축)

HSS Bull Point( 16진수 축 ) 280mm

HSS 콜드 치젤(16진수 축) 16 x 280mm

끌(SDS-max) 600mm

HSS Bull Point( SDS-max ) 280mm

HSS 콜드 치젤 ( SDS-max ) 16 x 280 mm　EA810TC-76

It uses chrome molybdenum steel, has excellent toughness and uses high speed steel at the tip to maintain sharpness, making it ideal for continuous work.
The bite of the shank part is good, and the bit does not shake, and the target part can be touched efficiently.

스크레이퍼(SDS Plus) 80 x 320 mm

스크레이퍼 교체 블레이드(직선) 40 x 80mm

끌(SDS Plus) 250mm　EA810XB-250

구멍톱세트(급수용)[카바이드(Carbide)]　EA823LY-5B

< Features of Hole Saw >
With a carbide tip, it has a longer life than a high speed or bi-metal hole saw.

구멍톱 세트[전기기기용] [카바이드]　EA823LY-6B

< Features of Hole Saw >
With a carbide tip, it has a longer life than a high speed or bi-metal hole saw.

카바이드가 부착된 홀 톱 세트(전기 및 공기조절 기기용).　EA823LY-10A

< Features of Hole Saw >
With a carbide tip, it has a longer life than a high speed or bi-metal hole saw.

파일럿 드릴[카바이드 사용]　EA823LZ-1A

탄화물을 사용한 구멍 톱 [ LENOX ] 19mm

헥스 샤프트 필리 제거 펀치 2 mm

스트레이트 드릴( Double-Flute/HSS ) 3.2mm

스트레이트 드릴( Double-Flute/HSS ) 3.2mm

카운터싱크 드릴 비트, 목공(16진수 축) 9.0 x 2.5, mm

카운터싱크 드릴 비트, 목공(16진수 축) 10.5 x 3.0, mm

카운터싱크 드릴 비트, 목공(16진수 축) 12.0 x 3.0, mm

카운터싱크 드릴 비트, 목공(16진수 축) 15.0 x 4.0, mm

카운터싱크 드릴 비트, 목공(16진수 축) 18.0 x 4.5, mm　EA824DX-44.5

The hexagonal shank paneling cone is a cone that can simultaneously perform a pre-hole such as a screw and a countersink for embedding.

Coutersink 드릴 비트, Ironworking(16진수 축) 9.0 x 2.5mm

Coutersink 드릴 비트, Ironworking(16진수 축) 10.5 x 3.0mm

Coutersink 드릴 비트, Ironworking(16진수 축) 12.0 x 3.0mm

Coutersink 드릴 비트, Ironworking(16진수 축) 15.0 x 4.0mm

Coutersink 드릴 비트, Ironworking(16진수 축) 18.0 x 4.5mm　EA824DY-44.5

The hexagonal shank paneling cone is a cone that can simultaneously perform a pre-hole such as a screw and a countersink for embedding.

Nail Eater 28.6 x 195 mm

구멍 톱(Co-HSS 코팅) 7 mm

구멍 톱(Co-HSS/코팅) 11mm　EA824HG-11

Ideal for drilling of stainless steel, iron, aluminum and other thin plates of 1.5 mm or less.