[Timken] AllProducts
랩 인스트루먼트 및 소모품
-
전자/전기 부품 및 제어 장치
공장 작업 도구 및 용품
-
생산 가공 장비
-
테이퍼 롤러 베어링 LM67048/LM67010, 31.75mm I.D, 59.13mm O.D LM67048/LM67010
테이퍼 롤러 베어링 - TS(테이퍼 싱글) 임페리얼/메트릭 이들 베어링은 가장 기본적이고 가장 널리 사용되는 테이퍼 롤러 베어링(tapered roller bearing)의 한 종류입니다. 두 개의 주요 분리 가능한 부품, 콘(내부 링) 어셈블리와 컵(외부 링)으로 구성됩니다. 이들은 일반적으로 하나의 축상에 서로 마주보는 쌍으로 장착되어 있다. 기능 및 이점 임페리얼/미터법 하나의 스탬프가 찍힌 스틸 케이지는 콘에 롤러를 유지합니다. 내경 범위는 7.937 mm ~ 86.360 mm입니다. 바깥지름은 31.991mm ~ 106.000mm입니다. 싱글 콘과 컵 제품 응용 프로그램 정보 전형적인 적용은 차량 전방 휠, 차동장치 및 피니언 구성, 컨베이어 롤, 기계 공구 스핀들 및 트레일러 휠을 포함한다.
1 제품을 찾았습니다.
JPY: 5,800
USD: 36.36
-
테이퍼 롤러 베어링 LM503349/LM503310, 45.98mm I.D, 74.97mm O.D LM503349/LM503310
테이퍼 롤러 베어링 - TS(테이퍼 싱글) 임페리얼/메트릭 이들 베어링은 가장 기본적이고 가장 널리 사용되는 테이퍼 롤러 베어링(tapered roller bearing)의 한 종류입니다. 두 개의 주요 분리 가능한 부품, 콘(내부 링) 어셈블리와 컵(외부 링)으로 구성됩니다. 이들은 일반적으로 하나의 축상에 서로 마주보는 쌍으로 장착되어 있다. 기능 및 이점 임페리얼/미터법 하나의 스탬프가 찍힌 스틸 케이지는 콘에 롤러를 유지합니다. 내경 범위는 7.937 mm ~ 86.360 mm입니다. 바깥지름은 31.991mm ~ 106.000mm입니다. 싱글 콘과 컵 제품 응용 프로그램 정보 전형적인 적용은 차량 전방 휠, 차동장치 및 피니언 구성, 컨베이어 롤, 기계 공구 스핀들 및 트레일러 휠을 포함한다.
1 제품을 찾았습니다.
JPY: 10,200
USD: 63.94
-
테이퍼 롤러 베어링 LM48548/LM48510, 34.92mm I.D, 65.08mm O.D LM48548/LM48510
Tapered Roller Bearings - TS (Tapered Single) Inches/Meters
This bearing is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). They are mounted mainly as facing pairs on the shaft.1 제품을 찾았습니다.
JPY: 6,720
USD: 42.12
-
테이퍼 롤러 베어링 LM11949/LM11910, 19.05mm I.D, 45.23mm O.D LM11949/LM11910
Tapered Roller Bearings - TS (Tapered Single) Inches/Meters
This bearing is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). They are mounted mainly as facing pairs on the shaft.1 제품을 찾았습니다.
JPY: 4,980
USD: 31.22
-
테이퍼 롤러 베어링 L44649/L44610, 26.98mm I.D, 50.29mm O.D L44649/L44610
Tapered Roller Bearings - TS (Tapered Single) Inches/Meters
This bearing is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). They are mounted mainly as facing pairs on the shaft.1 제품을 찾았습니다.
JPY: 5,680
USD: 35.61
-
테이퍼 롤러 베어링 07100S/07210X, 25.4mm I.D, 50.8mm O.D 07100S/07210X
Tapered Roller Bearings - TS (Tapered Single) Inches/Meters
This bearing is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). They are mounted mainly as facing pairs on the shaft.1 제품을 찾았습니다.
JPY: 11,100
USD: 69.58
-
테이퍼 롤러 베어링 M86649/M86610, 30.16mm I.D, 64.29mm O.D M86649/M86610
Tapered Roller Bearings - TS (Tapered Single) Inches/Meters
This bearing is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). They are mounted mainly as facing pairs on the shaft.1 제품을 찾았습니다.
JPY: 8,450
USD: 52.97
-
테이퍼 롤러 베어링 M802048/M802011, 41.27mm I.D, 82.55mm O.D M802048/M802011
Tapered Roller Bearings - TS (Tapered Single) Inches/Meters
This bearing is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). They are mounted mainly as facing pairs on the shaft.1 제품을 찾았습니다.
JPY: 14,300
USD: 89.64
-
테이퍼 롤러 베어링 M88048/M88010, 3.333mm I.D, 6.826mm O.D M88048/M88010
Tapered Roller Bearings - TS (Tapered Single) Inches/Meters
This bearing is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). They are mounted mainly as facing pairs on the shaft.1 제품을 찾았습니다.
JPY: 8,610
USD: 53.97
-
테이퍼 롤러 베어링 09067/09195, 19.05mm I.D, 49.22mm O.D 09067/09195
Tapered Roller Bearings - TS (Tapered Single) Inches/Meters
This bearing is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). They are mounted mainly as facing pairs on the shaft.1 제품을 찾았습니다.
JPY: 10,600
USD: 66.45
-
테이퍼 롤러 베어링 JL819349/JL819310, 95mm I.D, 135mm O.D JL819349/JL819310
Tapered Roller Bearings - TS (Tapered Single) Inches/Meters
This bearing is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). They are mounted mainly as facing pairs on the shaft.1 제품을 찾았습니다.
JPY: 34,700
USD: 217.51
-
테이퍼 롤러 베어링 37431A/37625, 10.953mm I.D, 158.75mm O.D 37431A/37625
Tapered Roller Bearings - TS (Tapered Single) Inches/Meters
This bearing is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). They are mounted mainly as facing pairs on the shaft.1 제품을 찾았습니다.
JPY: 46,700
USD: 292.74
-
테이퍼 롤러 베어링 18690/18620, 46.03mm I.D, 79.37mm O.D 18690/18620
Tapered Roller Bearings - TS (Tapered Single) Inches/Meters
This bearing is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). They are mounted mainly as facing pairs on the shaft.1 제품을 찾았습니다.
JPY: 13,600
USD: 85.25
-
테이퍼 롤러 베어링 HM88649/HM88610, 34.92mm I.D, 72.23mm O.D HM88649/HM88610
Tapered Roller Bearings - TS (Tapered Single) Inches/Meters
This bearing is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). They are mounted mainly as facing pairs on the shaft.1 제품을 찾았습니다.
JPY: 10,700
USD: 67.07
-
테이퍼 롤러 베어링 HM801346X/HM801310, 38.1mm I.D, 82.55mm O.D HM801346X/HM801310
Tapered Roller Bearings - TS (Tapered Single) Inches/Meters
This bearing is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). They are mounted mainly as facing pairs on the shaft.1 제품을 찾았습니다.
JPY: 21,500
USD: 134.77
-
테이퍼 롤러 베어링 LM603049/LM603011, 45.24mm I.D, 77.78mm O.D LM603049/LM603011
Tapered Roller Bearings - TS (Tapered Single) Inches/Meters
This bearing is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). They are mounted mainly as facing pairs on the shaft.1 제품을 찾았습니다.
JPY: 9,440
USD: 59.17
-
테이퍼 롤러 베어링 JLM104948/JLM104910, 50mm I.D, 82mm O.D JLM104948/JLM104910
Tapered Roller Bearings - TS (Tapered Single) Inches/Meters
This bearing is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). They are mounted mainly as facing pairs on the shaft.1 제품을 찾았습니다.
JPY: 11,600
USD: 72.71
-
테이퍼 롤러 베어링 3780/3720, 50.8mm I.D, 93.26mm O.D 3780/3720
Tapered Roller Bearings - TS (Tapered Single) Inches/Meters
This bearing is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). They are mounted mainly as facing pairs on the shaft.1 제품을 찾았습니다.
JPY: 17,200
USD: 107.82
-
테이퍼 롤러 베어링 L68149/L68111, 34.98mm I.D, 59.97mm O.D L68149/L68111
Tapered Roller Bearings - TS (Tapered Single) Inches/Meters
This bearing is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). They are mounted mainly as facing pairs on the shaft.1 제품을 찾았습니다.
JPY: 6,300
USD: 39.49
-
테이퍼 롤러 베어링 L44643/L44610, 25.4mm I.D, 50.29mm O.D L44643/L44610
Tapered Roller Bearings - TS (Tapered Single) Inches/Meters
This bearing is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). They are mounted mainly as facing pairs on the shaft.1 제품을 찾았습니다.
JPY: 5,700
USD: 35.73
-
테이퍼 롤러 베어링 L45449/L45410, 29mm I.D, 50.29mm O.D L45449/L45410
Tapered Roller Bearings - TS (Tapered Single) Inches/Meters
This bearing is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). They are mounted mainly as facing pairs on the shaft.1 제품을 찾았습니다.
JPY: 4,390
USD: 27.52
-
테이퍼 롤러 베어링 LM501349/LM501310, 41.27mm I.D, 73.43mm O.D LM501349/LM501310
Tapered Roller Bearings - TS (Tapered Single) Inches/Meters
This bearing is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). They are mounted mainly as facing pairs on the shaft.1 제품을 찾았습니다.
JPY: 8,300
USD: 52.03
-
테이퍼 롤러 베어링 18790/18720, 50.8mm I.D, 85mm O.D 18790/18720
Tapered Roller Bearings - TS (Tapered Single) Inches/Meters
This bearing is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). They are mounted mainly as facing pairs on the shaft.1 제품을 찾았습니다.
JPY: 13,700
USD: 85.88
-
테이퍼 롤러 베어링 HM89449/HM89410, 36.51mm I.D, 76.2mm O.D HM89449/HM89410
Tapered Roller Bearings - TS (Tapered Single) Inches/Meters
This bearing is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). They are mounted mainly as facing pairs on the shaft.1 제품을 찾았습니다.
JPY: 14,600
USD: 91.52
-
테이퍼 롤러 베어링 HM803146/HM803110, 41.27mm I.D, 8.89mm O.D HM803146/HM803110
Tapered Roller Bearings - TS (Tapered Single) Inches/Meters
This bearing is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). They are mounted mainly as facing pairs on the shaft.1 제품을 찾았습니다.
JPY: 20,400
USD: 127.88
-
테이퍼 롤러 베어링 JM822049/JM822010, 110mm I.D, 165mm O.D JM822049/JM822010
Tapered Roller Bearings - TS (Tapered Single) Inches/Meters
This bearing is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). They are mounted mainly as facing pairs on the shaft.1 제품을 찾았습니다.
JPY: 69,000
USD: 432.52
-
테이퍼 롤러 베어링 LM11749/LM11710, 17.46cm I.D, 39.87cm O.D LM11749/LM11710
Tapered Roller Bearings - TS (Tapered Single) Inches/Meters
This bearing is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). They are mounted mainly as facing pairs on the shaft.1 제품을 찾았습니다.
JPY: 4,530
USD: 28.40
-
테이퍼 롤러 베어링 LM29749/LM29710, 38.1mm I.D, 65.08mm O.D LM29749/LM29710
Tapered Roller Bearings - TS (Tapered Single) Inches/Meters
This bearing is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). They are mounted mainly as facing pairs on the shaft.1 제품을 찾았습니다.
JPY: 8,050
USD: 50.46
-
테이퍼 롤러 베어링 07087X/07210X, 22.22mm I.D, 50.8mm O.D 07087X/07210X
Tapered Roller Bearings - TS (Tapered Single) Inches/Meters
This bearing is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). They are mounted mainly as facing pairs on the shaft.1 제품을 찾았습니다.
JPY: 11,900
USD: 74.59
-
테이퍼 롤러 베어링 M84548/M84510, 25.4mm I.D, 57.15mm O.D M84548/M84510
Tapered Roller Bearings - TS (Tapered Single) Inches/Meters
This bearing is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). They are mounted mainly as facing pairs on the shaft.1 제품을 찾았습니다.
JPY: 9,370
USD: 58.74
-
테이퍼 롤러 베어링 LM806649/LM806610, 53.97mm I.D, 8.89mm O.D LM806649/LM806610
Tapered Roller Bearings - TS (Tapered Single) Inches/Meters
This bearing is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). They are mounted mainly as facing pairs on the shaft.1 제품을 찾았습니다.
JPY: 13,200
USD: 82.74
-
테이퍼 롤러 베어링 HM89446/HM89410, 34.92mm I.D, 76.2mm O.D HM89446/HM89410
Tapered Roller Bearings - TS (Tapered Single) Inches/Meters
This bearing is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). They are mounted mainly as facing pairs on the shaft.1 제품을 찾았습니다.
JPY: 14,400
USD: 90.27
-
테이퍼 롤러 베어링 LM67049A/LM67010, 31.75mm I.D, 59.13mm O.D LM67049A/LM67010
Tapered Roller Bearings - TS (Tapered Single) Inches/Meters
This bearing is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). They are mounted mainly as facing pairs on the shaft.1 제품을 찾았습니다.
JPY: 7,450
USD: 46.70
-
테이퍼 롤러 베어링 15123/15245, 31.75mm I.D, 62mm O.D 15123/15245
Tapered Roller Bearings - TS (Tapered Single) Inches/Meters
This bearing is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). They are mounted mainly as facing pairs on the shaft.1 제품을 찾았습니다.
JPY: 8,540
USD: 53.53
-
테이퍼 롤러 베어링 368A/362A, 50.8mm I.D, 88.9mm O.D 368A/362A
Tapered Roller Bearings - TS (Tapered Single) Inches/Meters
This bearing is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). They are mounted mainly as facing pairs on the shaft.1 제품을 찾았습니다.
JPY: 15,700
USD: 98.41
-
테이퍼 롤러 베어링 JL68145/JL68111Z, 35mm I.D, 60mm O.D JL68145/JL68111Z
Tapered Roller Bearings - TS (Tapered Single) Inches/Meters
This bearing is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). They are mounted mainly as facing pairs on the shaft.1 제품을 찾았습니다.
JPY: 8,370
USD: 52.47
-
테이퍼 롤러 베어링 25590/25520, 45.61mm I.D, 82.93mm O.D 25590/25520
Tapered Roller Bearings - TS (Tapered Single) Inches/Meters
This bearing is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). They are mounted mainly as facing pairs on the shaft.1 제품을 찾았습니다.
JPY: 11,800
USD: 73.97
-
테이퍼 롤러 베어링 18590/18520, 41.27mm I.D, 73.02mm O.D 18590/18520
Tapered Roller Bearings - TS (Tapered Single) Inches/Meters
This bearing is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). They are mounted mainly as facing pairs on the shaft.1 제품을 찾았습니다.
JPY: 15,600
USD: 97.79
-
테이퍼 롤러 베어링 3490/3420, 38.1mm I.D, 79.37mm O.D 3490/3420
Tapered Roller Bearings - TS (Tapered Single) Inches/Meters
This bearing is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). They are mounted mainly as facing pairs on the shaft.1 제품을 찾았습니다.
JPY: 22,800
USD: 142.92
-
테이퍼 롤러 베어링 M86647/M86610, 28.57mm I.D, 64.29mm O.D M86647/M86610
Tapered Roller Bearings - TS (Tapered Single) Inches/Meters
This bearing is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). They are mounted mainly as facing pairs on the shaft.1 제품을 찾았습니다.
JPY: 12,900
USD: 80.86
