Tsunoda Co., Ltd.

KingTTC 전용 공구 케이블 커터 2 구멍 유형　CA-60

Cuts cables (VCT, IV lines, etc.) and strands cleanly with light force.
The CA--22, 22 S, 38 and 60 have cutting blades at the tips, which are convenient for cutting and coating thin wires.

Tsunoda Co., Ltd.

KingTTC HARD WP 멀티플라이어 드라이버 3매　KT-606

With convenient shino, it is convenient to open the lid of the water meter box and the lid of the can.
With a platform cutter function that cuts wires.

Tsunoda Co., Ltd.

KingTTC 전용 도구 체인 탈착 플라이어 세로 형식　KT-802-1

With the combination of stepped tip and U/V groove, the roller chain can be installed and removed quickly and surely.
E-type retaining ring (E-ring) can also be installed and removed.

Tsunoda Co., Ltd.

파워 메탈 커터　PC-1100

Hard wire material cuts easily.
Can be cut with light force using double leverage.

Tsunoda Co., Ltd.

파워 엔드 커터　PC-1200

Hard wire can also be cut.
Blade shape suitable for cutting and pulling out parts protruding from the wall.

Tsunoda Co., Ltd.

KingTTC 전용 공구 플랫 유형 슬림 니퍼 스프링　SNP-145F

The tip is elongated to allow gate cutting without being disturbed by molded products or runners.

Tsunoda Co., Ltd.

KingTTC 전용 공구 원형 유형 슬림 니퍼 스프링　SNP-145R

The tip is elongated to allow gate cutting without being disturbed by molded products or runners.
Engineer plastic (PC, POM) can also be cut.

Tsunoda Co., Ltd.

삼위 얇은 니퍼　TM-02

The blade is thinly finished for plastic cutting, so the gate cuts cleanly.
Highly durable three-ply structure without rattling.

Tsunoda Co., Ltd.

트리니티 니들 - 노즈 플라이어(그루브)　TM-03

Suitable for fine machining and cutting wire at the tip.
It uses a three-ply structure, so it doesn't get rattled when used.

Tsunoda Co., Ltd.

트리니티 니들 - 노즈 플라이어(그루브)　TM-04

Convenient for mounting parts where fingers can't fit.
It has a three-ply construction, so it won't rattle when used.

Tsunoda Co., Ltd.

삼위일체 곡선팁 니들코 플라이어(그루브)　TM-05

The tip is bent at 45 degrees, making it easy to hold parts on a table.
It uses a three-ply structure, so it doesn't get rattled when used.

Tsunoda Co., Ltd.

삼위일체 곡선팁 니들코 플라이어(그루브)　TM-06

You can work in places where you can't put your finger without damaging it.
It uses a three-ply structure, so it doesn't get rattled when used.

Tsunoda Co., Ltd.

트리니티 히라구치 납 플라이어(그루브)　TM-07

It has a wide and flat mouth so you can bend metal plates and crush caulking balls and ball tips.
It uses a three-ply structure, so it doesn't get rattled when used.

Tsunoda Co., Ltd.

삼위 니퍼　TM-10

Since there is a blade at the tip of the thin head, it is suitable for cutting work in narrow parts.
It uses a three-ply structure, so it doesn't get rattled when used.

Tsunoda Co., Ltd.

삼위 매우 얇은 리드 플라이어　TM-13

Since the tip part is quenched, even if it's thin, it won't be sticky.
It uses a three-ply structure, so it doesn't get rattled when used.

Tsunoda Co., Ltd.

삼위 니퍼　TM-14

It is convenient for cutting and pulling out protrusions such as making wooden models.
It uses a three-ply structure, so it doesn't get rattled when used.

Tsunoda Co., Ltd.

삼위 테이퍼 니퍼(반플러시)　TM-15

The inclination of the blade is 10°, suitable for cutting closely spaced parts.
It uses a three-ply structure, so it doesn't get rattled when used.

Tsunoda Co., Ltd.

KingTTC 전용 공구 와이어 로프 커터 잠금 스프링　WC-150

The wire breaks beautifully without fraying.
The one-touch opening and closing lock mechanism is convenient for carrying, and the lock comes off easily when you just grip it with one hand.

Tsunoda Co., Ltd.

KingTTC 전용 공구 대형 와이어 로프 커터 잠금 스프링　WC-450

The wire breaks beautifully without fraying.
Wire ropes up to 14 mm can be cut.

Tsunoda Co., Ltd.

플라이어

Tsunoda Co., Ltd.

스프링 굽힘

Tsunoda Co., Ltd.

그립 니퍼 150mm　TH-150NC

Two PPA resin pads catch the chips.
You can also firmly grasp the binding band and ultra-fine wire of 0.1 mm or less.

Tsunoda Co., Ltd.

홈이 파인 워터 펌프 플라이어 250MM　WP-250

This product conforms to the Japanese Industrial Standard (JIS), which is manufactured under strict quality control.
Rust resistant plated finish.

Tsunoda Co., Ltd.

［단종］POWER Universal Pliers Elastomer Grip　PW-114DG

Compared to conventional products, the distance from the blade point (the point of action) to the caulking point (the fulcrum point) has been shortened, thereby reducing the load (grip strength) during cutting by 30%.
The eccentric lever increases the cutting force compared to conventional products.

Tsunoda Co., Ltd.

［단종］POWER Needle-Nose Pliers JIS(편심 레버리지) Elastomer Grip　PW-202DG

Eccentric lever cuts with less force than conventional products.
It is a JIS standard product.

Tsunoda Co., Ltd.

［단종］파워 멀티 라디오 엘라스토머 그립　PW-212DG

The tip blade can cut copper wire φ0.5.
Can be pinched and cut with just the tip.

Tsunoda Co., Ltd.

［단종］강력한 니퍼 JIS(편심 레버리지) Elastomer Grip　PW-302DG

The eccentric lever cuts with a lighter force than conventional products.

Tsunoda Co., Ltd.

［단종］파워 하드 와이어 니퍼 엘라스토머 그립　PW-322DG

With the special blade attachment and eccentric structure for hard steel, it is possible to cut stainless steel wire of φ1.6 mm with light force.
The eccentric lever cuts with a lighter force than conventional products.

Tsunoda Co., Ltd.

［단종］POWER 대각선으로 니퍼 (3매) 엘라스토머 그립　PW-351DG

Adopts a sandwich (three-ply) structure that does not rattle when used.
This is a highly functional tool that incorporates new functions and seeks greater ease of use.

Tsunoda Co., Ltd.

［단종］POWER 대각선으로 니퍼 (3매) 엘라스토머 그립　PW-352DG

Adopts a sandwich (three-ply) structure that does not rattle when used.
This is a highly functional tool that incorporates new functions and seeks greater ease of use.

Tsunoda Co., Ltd.

［단종］내부 링용 스냅 링 플라이어

Tsunoda Co., Ltd.

［단종］외부 링용 스냅 링 플라이어

Tsunoda Co., Ltd.

［단종］스프링 굽힘