[TP GIKEN] AllProducts
-
-
-
-
-
-
-
-
-
-
-
-
-
-
처짐 시험기(처짐 시험기) BOX Type JIS Standard 140 x 40 x 30mm
3 제품을 찾았습니다.
JPY: 186,000-
USD: 1,165.93-
-
-
안료 분산 비교 시험기 500 x 420 x 650mm TP-035
This machine has been developed as a dispersion comparison test machine that is closest to the dispersion principle of Eyeliter sand grind mill.
Pigments, vehicles, and glass beads are prepared in a glass tube, tightly stoppered, and loaded into the unit. When horizontal motion is applied in the longitudinal direction of the tube, the dispersion effect is exerted by the movement and vibration of the glass bead.1 제품을 찾았습니다.
JPY: 990,000
USD: 6,205.73
-
표범의 내마모성 시험기 515 x 310 x 360mm TP-152
This machine is used to measure the degree of wear of surface treatment materials such as coating and plating, plastics, rubber, decorative plywood, fibers, and other materials.
1 제품을 찾았습니다.
JPY: 1,250,000
USD: 7,835.52
-
세탁 테스터(랙 2개) 480 x 650 x 720mm TP-153
It is an excellent testing machine that performs cleaning resistance tests on paint coatings, plastics, floor materials, and other materials and is manufactured in accordance with JIS standards and the Gardner system.
The specimen surface is reciprocated at constant speed by the prescribed brush to observe the condition of feeding the specimen.1 제품을 찾았습니다.
JPY: 1,198,000
USD: 7,509.56
-
필름 마찰 테스트 기계 400 x 350 x 600mm TP-154
This machine measures the friction durability of marker pens for metal coatings and stationery by rubbing them with gauze, felt, sand eraser, etc.
1 제품을 찾았습니다.
JPY: 824,000
USD: 5,165.17
-
Erichsen 테스트 장비 240 x 480 x 300mm TP-180
This unit measures the coating strength of a painted surface.
The specimen set in the specimen holder is fastened and fixed with a die, and the punch is extruded from the back of the film surface.1 제품을 찾았습니다.
JPY: 1,188,000
USD: 7,446.88
-
흡입 플레이트 160 x 260 x 50mm TP-201
When the applicator, sag tester, etc., is used to create a constant thickness coating film, the purpose of this system is to create a constant coating film by sucking and adhering the test specimen onto the plate (float glass) to maintain smooth contact.
1 제품을 찾았습니다.
JPY: 73,800
USD: 462.61
-
필름 자동어플리케이터(바를 코터로도 사용되는 형) 940 x 540 x 300mm TP-202
This is a test machine that performs optimum coating tests on sheets of paper, metal, film, etc., by setting the coating speed with an applicator or bar coater.
1 제품을 찾았습니다.
JPY: 1,370,000
USD: 8,587.73
-
JIS 유형 픽업 시간 테스트기 없음 450 x 400 x 400mm TP-250
This machine measures the drying time of traffic paint. It rolls the machine on the painted surface at a constant speed (passing through the paint film for 1 second) and checks whether the paint film has adhered to the tire of the test roll.
Use the traffic applicator to create a 150 mm wide coating film. Test the film 15 minutes after 1 type, 10 minutes after 2 types, and 3 types after 3 minutes to check for adhesion and reference the no-pickup time.1 제품을 찾았습니다.
JPY: 459,000
USD: 2,877.20
-
펜슬 스크래치 테스트 기계(수동 유형) 150(130) x 80 x 65mm TP-260
This is a manual pencil scratching tester manufactured in accordance with JIS K-5600 and equipped with the function of a pencil scratching tester.
The hardness and adhesion strength of the coating film are measured by the hardness of the pencil that scratches when the paint or varnish is scratched with a pencil held at a load of 750 g and an angle of 45 degrees.1 제품을 찾았습니다.
JPY: 86,700
USD: 543.47
-
건식내구시험기 TP-261
It is used for a pass/fail test to determine whether a single coating or multilayer coating system of a paint or related product has reached a cured dry state after a specified drying time has elapsed.
It can also be used to measure the time it takes to reach the cured dry state.1 제품을 찾았습니다.
JPY: 349,000
USD: 2,187.68
-
포드 컵 스테인레스 스틸 200 x 180 x 280mm TP-304
This device fills a cup with a sample of paint, varnish, etc., and measures the viscosity easily and quickly by grinding the surface tension with the attached glass plate and the flow time from a fixed orifice.
1 제품을 찾았습니다.
JPY: 155,000
USD: 971.60
-
-
-
스토머 점도계 210 x 210 x 415mm TP-330
Viscosity of paint in a 500 ml sample can is measured in seconds of 100 revolutions by the resistance value of the accurately finished rotor blade.
This is a test machine that measures the time and calculates the KU value by determining the head so that the rotor rotates 100 times in about 30 seconds.1 제품을 찾았습니다.
JPY: 568,000
USD: 3,560.46
-
-
JIS 투습 컵 410 x 250 x 200mm TP-415
This unit is used to measure the moisture permeability of plastic paper, tarpaulin paper, and other packaging materials.
1 제품을 찾았습니다.
JPY: 298,000
USD: 1,867.99
-
-
［단종］RC형 피막건조시간 측정기 I형(건조기록기) 240 x 500 x 110mm
2 제품을 찾았습니다.
JPY: 495,000-
USD: 3,102.87-
