[Bunkaboeki Kogyo Co., Ltd.] AllProducts
공장 작업 도구 및 용품
-
작업 도구, 공급
-
생산 가공 장비
-
-
-
-
확장기 2526-45
As well as being lightweight, it can be swaged to close to a circle in one go.
After the tube is expanded, the head can be easily pulled out.1 제품을 찾았습니다.
JPY: 117,000
USD: 733.40
-
-
-
R-410A 볼 밸브형 매니폴드 키트 410-FMK
A kit with manifold for R410A/R32 and special hose for R410A in a carrying case for easy carrying.
Comes with a sight glass to visually check the condition of the refrigerant.1 제품을 찾았습니다.
JPY: 32,000
USD: 200.59
-
R-410A 볼 밸브 타입 싱글 매니폴드 키트 W1-410BVK-2
It is a set with 3 charging hoses.
Ideal for room air conditioners with only low-voltage single service ports.1 제품을 찾았습니다.
JPY: 25,000
USD: 156.71
-
R-410A 매니폴드 키트 충전 호스 케이스 키트 410-PMK
Manifold kit for R410A/R32.
The manifold body is thin and compact.1 제품을 찾았습니다.
JPY: 26,400
USD: 165.49
-
래칫 벤더 세트 RB-147W
Uses aluminum wheels.
Since it is made of aluminum, it is sturdy, and it eliminates the problem that the copper tube gets stuck after processing and hardly comes off.1 제품을 찾았습니다.
JPY: 44,580
USD: 279.45
-
초경량 플레어 도구(내장 플런저) 700-FNPA
With the sliding plunger positioning structure, when the fixed position of the yoke part slides, it stops at the appropriate position. (Utility Model Registration No. 3181779)
Aluminum alloy is extremely lightweight, about 50% the weight of conventional aluminum alloy. (our company ratio)1 제품을 찾았습니다.
JPY: 31,900
USD: 199.96
-
반단면 자동관절단기 TC-320S
The spring type blade feed mechanism realizes cutting that is hard to burr.
By making the cutting blade single-edged, copper tubes can be cut cleanly and efficiently.1 제품을 찾았습니다.
JPY: 6,036
USD: 37.84
-
튜브 커터의 교체 블레이드(TC-220S 및 TC-320S용) TC-320S-B2
Replacement blades for automatic tube cutters TC-220S and TC-320S.
1 제품을 찾았습니다.
JPY: 4,500
USD: 28.21
-
소형 자동 튜브 절단기 TC-220S
The automatic mechanism, which does not require the blade to be fed, makes cutting difficult to burr.
When the handle is tightened according to the material of the copper pipe, the copper pipe can be cut without further tightening the handle due to the stretching action of the built-in spring.1 제품을 찾았습니다.
JPY: 4,643
USD: 29.10
-
래칫형 경량 플레어링 툴 700-RPA
Built-in ratchet mechanism allows smooth switching.
The forward/reverse rotation changeover knob is mounted under the handle to prevent malfunction.1 제품을 찾았습니다.
JPY: 30,700
USD: 192.44
-
［단종］감지 감도를 위한 가스 누출 탐지기 프레온 가스(R-410A) LS-790B
The lockout (automatic density storage) method enables easy detection of leakage sources.
You can set 10 sensitivity levels to accurately display the amount of leakage. (Bar graph LED display)1 제품을 찾았습니다.
JPY: 59,286
USD: 371.63
-
［단종］감지 감도를 위한 가스 누출 탐지기 프레온 가스(R-410A) LS3000
Fully automatic, the amount of gas leakage is indicated by LED and the leakage area is indicated by alarm sound.
Sensor system.1 제품을 찾았습니다.
JPY: 61,714
USD: 386.85
-
-
［단종］튜브 자동절단기(타이타늄 코딩 블레이드 규격) TC320T
The spring type blade feed mechanism realizes cutting that is hard to burr.
Titanium coated blade.1 제품을 찾았습니다.
JPY: 4,179
USD: 26.20
-
［단종］발리 전용 파이프 리머 구리 211-F
With 11 blades, it can be smoothly deburred with no deviation.
Deburring of copper, aluminum, brass and hard PVC pipes.1 제품을 찾았습니다.
JPY: 3,621
USD: 22.70
-
［단종］오일 이스트폴리올로 탄소 회수 장치 RM300
This portable recovery machine is equipped with a 1 horsepower (750 W) compressor with a gas recovery capacity of 200 g or more per minute.
High speed and stable recovery is possible with a twin cylinder compressor.1 제품을 찾았습니다.
JPY: 211,000
USD: 1,322.64
-
［단종］소형 충전량 BS500
It can measure up to a cylinder containing 20 kg of fluorocarbon (fluorocarbon gas).
Convenient dry battery (9V alkaline battery) and AC adaptor type.1 제품을 찾았습니다.
JPY: 43,495
USD: 272.65
-
［단종］단일 디지털 매니폴드 R-410A WD2410CMB
The sensor detects negative pressure.
There is no need to worry about damage due to pressure like a normal vacuum gauge.1 제품을 찾았습니다.
JPY: 33,429
USD: 209.55
-
［단종］볼밸브 디지털 매니폴드 WD2410CMB2
The sensor detects negative pressure.
There is no need to worry about damage due to pressure like a normal vacuum gauge.1 제품을 찾았습니다.
JPY: 33,429
USD: 209.55
-
［단종］기어 작동식 래칫 플레어 툴 1000-FN
The changeover knob type ratchet mechanism and the upward handle make it easier to operate.
The plunger type positioning structure stops the bar at the correct position.1 제품을 찾았습니다.
JPY: 23,214
USD: 145.52
-
［단종］슬림형 미니 디지털 매니폴드 세트 WD3-32B
This digital manifold can measure from vacuum pressure (-0.100 MPa) to gas pressure (+5.000 MPa).
The weight of the manifold is about 40% lighter than conventional products.1 제품을 찾았습니다.
JPY: 36,214
USD: 227.00
-
［단종］슬림형 미니 디지털 매니폴드 WD3-32CMB
This digital manifold can measure from vacuum pressure (-0.100 MPa) to gas pressure (+5.000 MPa).
It is about 40% lighter than conventional products.1 제품을 찾았습니다.
JPY: 24,607
USD: 154.25
-
［단종］무유성 불화탄소 회수 시스템 RM330
It is an inverter type lightweight collection machine.
It is also strong in low voltage and voltage drop environments.1 제품을 찾았습니다.
JPY: 204,286
USD: 1,280.55
-
［단종］소형 충전량 LMC-200
Prevents malfunction due to static electricity.
Accurate gas filling every 5 grams is possible.1 제품을 찾았습니다.
JPY: 32,500
USD: 203.72
