FUJIGEN KOGYO Co., Ltd.

Tibirsko 블레이드 지름: 위1.2-위9.7 끝 각도: 90 생크 지름: 10

FUJIGEN KOGYO Co., Ltd.

껍질이 없는 에코 블레이드 지름: 와. 90 생크 지름: 12

FUJIGEN KOGYO Co., Ltd.

Eco Men 블레이드 지름: 와. 2-와. 90 생크 지름: 20

FUJIGEN KOGYO Co., Ltd.

Chwimmi 팁 각도: 길이 90: 105 생크 지름: 10

FUJIGEN KOGYO Co., Ltd.

느슨해진 남자 팁 각도: 길이 90: 110 생크 지름: 16년

FUJIGEN KOGYO Co., Ltd.

큰 전나무 끝 각도: 길이 90: 130 생크 지름: 20

FUJIGEN KOGYO Co., Ltd.

Tibirsko 2 생크 지름: 16 최대 모따기 지름: 로18.0

FUJIGEN KOGYO Co., Ltd.

Eco 2 생크 지름 고정: 20 최대 모따기 지름: 로24.7

FUJIGEN KOGYO Co., Ltd.

Eco Men 2 생크 지름: 32 최대 모따기 지름: 로36.3

FUJIGEN KOGYO Co., Ltd.

바이텐더 세트(차체, 팔)

FUJIGEN KOGYO Co., Ltd.

청년 팁 각도: 30 생크 지름: 32년

FUJIGEN KOGYO Co., Ltd.

모따기 변위 루비 팁 각도에 대한 드릴링 머신: 45 생크 지름: 10

FUJIGEN KOGYO Co., Ltd.

Marchangelemir 팁 각도: 0-90 생크 지름: 32년

FUJIGEN KOGYO Co., Ltd.

알 스페셜 주니어 생크　NK25-05R

Chip replaceable and R chamfering up to 0.5~5R is possible.
Carbide chips that can be used on 4 sides with 1 chip, and the life is more than 5 times longer than Hiss.

FUJIGEN KOGYO Co., Ltd.

Ryan Men 시트 R 팁 각도: 45 생크 지름: 16년

FUJIGEN KOGYO Co., Ltd.

미니 R 팁 각도: 45 생크 지름: 20　MR20-16S

R chamfer and C chamfer can be performed by replacing the chip.
It uses a chip that can be used for 8 corners.

FUJIGEN KOGYO Co., Ltd.

클램프 나사 길이: 4.8cm M2.5 오른쪽

FUJIGEN KOGYO Co., Ltd.

잠금 핀 길이 20mm M6 오른쪽

FUJIGEN KOGYO Co., Ltd.

스패너 길이 90mm　NL-4

Used to attach clamp screws and lock pins to chamfer cutter tips.

FUJIGEN KOGYO Co., Ltd.

S 형식 Precision 클래스 팁 처리를 위한 면　S32GURDIA

Face milling, chamfering.

FUJIGEN KOGYO Co., Ltd.

모따기 변위 루비 30°

FUJIGEN KOGYO Co., Ltd.

모따기 커터 45° 생크 32　NK4530T

The problem of secondary scratching in various work materials was also cleared.
You can select an angle and chamfer up to 10 C.

FUJIGEN KOGYO Co., Ltd.

회전하지 않은 남자 45 ° 생크

FUJIGEN KOGYO Co., Ltd.

언헐드 맨 나노　SCN0845E

It is now possible to perform machining on areas where chamfering or fumigation could not be performed due to interference from vise or clamp.
Center hole/fizzle processing, countersunk chamfering, and edge chamfering are possible.

FUJIGEN KOGYO Co., Ltd.

Nicecut용 Arm (음수 S형, 3피스)　AMNS-03

The machining type can be changed by replacing the arm.
Face milling.

FUJIGEN KOGYO Co., Ltd.

Nicecut용 Arm (음수 S형, 6피스)　AMNS-06

The machining type can be changed by replacing the arm.
Face milling.

FUJIGEN KOGYO Co., Ltd.

Nicecut용 Arm(네거티브 T 타입, 3피스)　AMNT-03

The machining type can be changed by replacing the arm.
Face milling.

FUJIGEN KOGYO Co., Ltd.

Nicecut용 Arm(네거티브 T 타입, 6피스)　AMNT-06

The machining type can be changed by replacing the arm.
Face milling.

FUJIGEN KOGYO Co., Ltd.

에어로밀(Aero Mill)(산크()　ARN12-30S

The use of a small diameter shank makes it suitable for use in low-stiffness machines.
By using different negative and positive types of machining work, it is possible to machine under more optimal conditions.

FUJIGEN KOGYO Co., Ltd.

에어로 밀(Aero Mill)(산크()　ARN16-40S

The use of a small diameter shank makes it suitable for use in low-stiffness machines.
By using different negative and positive types of machining work, it is possible to machine under more optimal conditions.

FUJIGEN KOGYO Co., Ltd.

에어로 밀(Aero Mill)("생크" 12, 머시닝 다이아믹 위", "포지티브 타입")　ARP12-30S

The use of a small diameter shank makes it suitable for use in low-stiffness machines.
By using different negative and positive types of machining work, it is possible to machine under more optimal conditions.

FUJIGEN KOGYO Co., Ltd.

에어로 밀(Aero Mill)("생크"16, 머시닝 다이아믹 위", "포지티브 타입")　ARP16-40S

The use of a small diameter shank makes it suitable for use in low-stiffness machines.
By using different negative and positive types of machining work, it is possible to machine under more optimal conditions.

FUJIGEN KOGYO Co., Ltd.

Center chamfer mill aluminum samurai Ø10 Long Type　AZ10-90-L120

Uses the cutting edge shape that is ideal for aluminum processing, resulting in good sharpness and reduces the occurrence of keri and burr.
Reduces deburring work after machining.

FUJIGEN KOGYO Co., Ltd.

중앙 모따기 밀 알루미늄 사무라이　AZ10-90-L75

Uses the cutting edge shape that is ideal for aluminum processing, resulting in good sharpness and reduces the occurrence of keri and burr.
Reduces deburring work after machining.

FUJIGEN KOGYO Co., Ltd.

중앙 모따기 밀 알루미늄 사무라이　AZ4-90-L60

Uses the cutting edge shape that is ideal for aluminum processing, resulting in good sharpness and reduces the occurrence of keri and burr.
Reduces deburring work after machining.

FUJIGEN KOGYO Co., Ltd.

중앙 모따기 밀 알루미늄 사무라이　AZ6-90-L75

Uses the cutting edge shape that is ideal for aluminum processing, resulting in good sharpness and reduces the occurrence of keri and burr.
Reduces deburring work after machining.

FUJIGEN KOGYO Co., Ltd.

버디 시트 M8　BC16-14XS-M8

Significantly shortens the conventional process of cap bolt seat grinding.
The seat grinding and chamfering of the lower hole are performed simultaneously, and the depth of machining can be freely adjusted.

FUJIGEN KOGYO Co., Ltd.

버디 시트 M10　BC20-17.5XS-M10

Significantly shortens the conventional process of cap bolt seat grinding.
The seat grinding and chamfering of the lower hole are performed simultaneously, and the depth of machining can be freely adjusted.

FUJIGEN KOGYO Co., Ltd.

버디 시트 M12　BC20-20XS-M12

Significantly shortens the conventional process of cap bolt seat grinding.
The seat grinding and chamfering of the lower hole are performed simultaneously, and the depth of machining can be freely adjusted.

FUJIGEN KOGYO Co., Ltd.

버디 시트 M14　BC25-23XS-M14

Significantly shortens the conventional process of cap bolt seat grinding.
The seat grinding and chamfering of the lower hole are performed simultaneously, and the depth of machining can be freely adjusted.