Showa Sokki Corporation

진동 스위치　MODEL-1500B

Small vibration monitoring switch with integrated sensor, amplifier and relay.
Alarm level can be set in the range of 1~99% at 2 alarm relay contacts.

Showa Sokki Corporation

디지털 충격 및 진동 가속도계　MODEL-1340B

Ultra-compact, easy-to-operate impact and vibration accelerometer.
It is very small and light, so it is convenient to carry with excellent workability.

Showa Sokki Corporation

휴대용 진동 진동계　MODEL-1332B

Handy type portable vibrometer.
Vibration measurement is easy for anyone. Ultra-compact, simple, practical and speedy measurement.

Showa Sokki Corporation

Portable Balancer　MODEL-7102B

A strobe type field balancer that can easily measure the balance of a rotating machine.
There is an output terminal for monitoring and waveform observation and recording are possible.

Showa Sokki Corporation

휴대용 진동계 DIGI-VIBRO(대용량 입력 유형)

Showa Sokki Corporation

DIGI-VIBRO용 저소음 케이블 1.5m

Showa Sokki Corporation

DIGI-VIBRO용 컬 케이블　LNC-3F-CC

A curl cable that can be used for 1332B series devices other than lightweight sensor types.
When you want to use a curl cable on the 1332B.

Showa Sokki Corporation

DIGI-VIBRO용 자석

Showa Sokki Corporation

DIGI-VIBRO용 L 접촉 핀

Showa Sokki Corporation

3.5phi-BNC 출력 케이블　9803-97

Output cable for 1332B.
You can output AC from the 1332B and load it into the recorder.

Showa Sokki Corporation

바이브로 레코더　9801

It can be connected to a vibrometer for easy waveform recording.
Can be recorded on a C F card and transferred to a personal computer.

Showa Sokki Corporation

CF 카드　9803-73

A CF card for use with a vibro recorder. The vibro recorder cannot store vibration waveforms without a CF card.

Showa Sokki Corporation

배터리 팩　9780

Battery pack used for vibro recorder.
Vibrorecorders cannot be charged without a battery pack.

Showa Sokki Corporation

BNC-BNC 출력 케이블　9803-95

BNC- An output cable for a vibro recorder connected by BNC.
Since it is BNC-BNC, it can be used with other products.

Showa Sokki Corporation

Clip-BNC 출력 케이블　9803-96

Clip — An output cable for a vibro recorder connected by a BNC.

Showa Sokki Corporation

변환 커넥터　BNCP-C25J

Connector for converting 10-32 to BNC.

Showa Sokki Corporation

바이브로 레코더용 휴대용 케이스　9782

This optional special case fits the vibro recorder set perfectly.

Showa Sokki Corporation

FFT 분석 소프트웨어　9803-90

This software enables waveform display and frequency analysis of data recorded with a Vibrorecorder or Vibroview on a personal computer.
1/3 Octave band analysis function is provided.

Showa Sokki Corporation

피에조 전기 가속도 센서

Showa Sokki Corporation

휴대용 진동계 미니 진동계　1022A

Compact and lightweight analog meter type portable vibrometer.
Vibration measurement of rotating machinery and reciprocating machinery can be accurately performed.

Showa Sokki Corporation

미니 진동용 자석(1022A용)　MG-2

Magnet that can be used for 1022 A.

Showa Sokki Corporation

미니 진동 센서 케이블(1022A용)　CA2411-1

Sensor cable for use with 1022 A.

Showa Sokki Corporation

저주파 미니 진동용 진동계　1422A

Handy size, portable low frequency vibrometer from 2Hz.
Vibrometer developed for low frequency vibration measurement.

Showa Sokki Corporation

Vibro 레코더 세트(1332B용)　9801-T01

1332B data recording set.
Connecting to the 1332B for easy waveform recording

Showa Sokki Corporation

진동 변환기(가속도법)

Showa Sokki Corporation

PLC용 교류 출력 진동 센서　2507

Standard cable is 3 meters.
Vibration sensor specialized for PLC (programmable logic controller) connection. Outputs waveform signals of vibration acceleration with high accuracy detection.

Showa Sokki Corporation

디지털 모니터　2590C-A11

This digital vibration monitor can be combined with vibration converter 2502 series to easily measure and monitor vibration.
It receives a signal of 4~20 mA and can be scaled.

Showa Sokki Corporation

진동 컨버터용 자석　MG-6

Special magnet for vibro converter 2502 series.

Showa Sokki Corporation

Vibro Converter 모니터 세트(가속도측정)

Showa Sokki Corporation

PLC용 센서 증폭기　9401-02

Vibration sensor amplifier developed for PLC (Pluggable Logic Controller) which aggregates IoT data.
It can be combined with various vibration sensors suitable for various applications and environments, and passes high-precision vibration waveform information to the PLC in real time.

Showa Sokki Corporation

증폭기가 내장된 가속도계

Showa Sokki Corporation

PLC 센서 증폭기용 센서 케이블(2470 및 2479-9401용) 5m

Showa Sokki Corporation

PLC 센서 증폭기용 출력 케이블(9401용)　CA2153-1

This output cable connects the 9401 inch model to the PLC.

Showa Sokki Corporation

교정을 위한 휴대용 셰이커　8100

It is a vibrator for easily calibrating vibration sensors and vibration meters in the field.
The vibrator, oscillator and vibrometer are compactly integrated.

Showa Sokki Corporation

엘리베이터의 진동 측정 장치　6601

Vibration measurement equipment conforming to ISO's elevator diagnostic standards.
This equipment is put on the elevator, and the data is acquired and analyzed by the PC.

Showa Sokki Corporation

이동식 밸런서(한면 수정 세트)

Showa Sokki Corporation

잔액보정계산기　CAL-40

It is a small computer equipped with a special program for balance correction.
You can calculate the weight and mounting position of the balance weight simply by entering each parameter numerically according to the screen display.

Showa Sokki Corporation

지진모니터링용 진동검출기　2702

It is a vibration detector for monitoring ground motion.
3 direction vector of XYZ The combined vibration acceleration is output at DC4-20 mA.

Showa Sokki Corporation

［단종］지진감시 진동검출기 디지털 모니터 세트　MODEL2702D1

3 direction vector of XYZ The combined vibration acceleration is output 4-20 mA.
Display and alarm output are performed on the digital monitor 2590B.