YUKO Corporation

플렉스 혼 #SC180

YUKO Corporation

소형 브러시

YUKO Corporation

KIC 연마립 입력 나일론 브러시

YUKO Corporation

BC10#AO240 플렉스 혼. 0

YUKO Corporation

BC4#AO180 Flex Horn입니다. 0　BC-40AO180

YUKO Corporation

플렉스 혼#SC320 BC64입니다. 0　BC-640SC320

It is a structure in which a ball of sintered population abrasive grain is attached to a foot made of fiber resin that comes out from the shaft.
The feet are made of nylon resin and are highly elastic. The inner surface of the workpiece is burr and the inner surface of the workpiece with irregularities can be polished.

YUKO Corporation

핸디형 진공 펌프

YUKO Corporation

소형 브러시(스테인레스 스틸 와이어 브러시)　81-A-0.6

Industrial manual super fine wire brush.
Use this product to remove burrs in cross holes of φ12 or less which cannot be covered by flex horn ®.

YUKO Corporation

소형 브러시(스테인레스 스틸 와이어 브러시)　81-A-0.8

Industrial manual super fine wire brush.
Use this product to remove burrs in cross holes of φ12 or less which cannot be covered by flex horn ®.

YUKO Corporation

소형 브러시 81-AY Inc. (연마용 청키 나일론 브러시)　81-AY-0.8

Ultra-fine nylon brush with abrasive grains.
It is attached to a drill and used with a right rotation of 1000rpm or less.

YUKO Corporation

소형 브러시(스테인레스 스틸 와이어 브러시)　81-B-10.0

Industrial manual super fine wire brush.
Use this product to remove burrs in cross holes of φ12 or less which cannot be covered by flex horn ®.

YUKO Corporation

소형 브러시(스테인레스 스틸 와이어 브러시)　81-B-11.0

Industrial manual super fine wire brush.
Use this product to remove burrs in cross holes of φ12 or less which cannot be covered by flex horn ®.

YUKO Corporation

소형 브러시(스테인레스 스틸 와이어 브러시)　81-B-12.0

Industrial manual super fine wire brush.
Use this product to remove burrs in cross holes of φ12 or less which cannot be covered by flex horn ®.

YUKO Corporation

소형 브러시(스테인레스 스틸 와이어 브러시)　81-B-7.0

Industrial manual super fine wire brush.
Use this product to remove burrs in cross holes of φ12 or less which cannot be covered by flex horn ®.

YUKO Corporation

소형 브러시(스테인레스 스틸 와이어 브러시)　81-B-8.0

Industrial manual super fine wire brush.
Use this product to remove burrs in cross holes of φ12 or less which cannot be covered by flex horn ®.

YUKO Corporation

소형 브러시(스테인레스 스틸 와이어 브러시)　81-B-9.0

Industrial manual super fine wire brush.
Use this product to remove burrs in cross holes of φ12 or less which cannot be covered by flex horn ®.

YUKO Corporation

소형 브러시(연마용 청키 나일론 브러시)　81-BY-10.0

Ultra-fine nylon brush with abrasive grains.
It is attached to a drill and used with a right rotation of 1000rpm or less.

YUKO Corporation

소형 브러시(연마용 청키 나일론 브러시)　81-BY-11.0

Ultra-fine nylon brush with abrasive grains.
It is attached to a drill and used with a right rotation of 1000rpm or less.

YUKO Corporation

소형 브러시(연마용 청키 나일론 브러시)　81-BY-12.0

Ultra-fine nylon brush with abrasive grains.
It is attached to a drill and used with a right rotation of 1000rpm or less.

YUKO Corporation

소형 브러시(연마용 청키 나일론 브러시)　81-BY-7.0

Ultra-fine nylon brush with abrasive grains.
It is attached to a drill and used with a right rotation of 1000rpm or less.

YUKO Corporation

소형 브러시(연마용 청키 나일론 브러시)　81-BY-8.0

Ultra-fine nylon brush with abrasive grains.
It is attached to a drill and used with a right rotation of 1000rpm or less.

YUKO Corporation

소형 브러시(연마용 청키 나일론 브러시)　81-BY-9.0

Ultra-fine nylon brush with abrasive grains.
It is attached to a drill and used with a right rotation of 1000rpm or less.

YUKO Corporation

플렉스 혼 #SC600 SC60　BC-10.0 SC600

It is a structure in which a ball of sintered population abrasive grain is attached to a foot made of fiber resin that comes out from the shaft.
The feet are made of nylon resin and are highly elastic. The inner surface of the workpiece is burr and the inner surface of the workpiece with irregularities can be polished.

YUKO Corporation

플렉스 혼 #SC60 SC60　BC-11.0 SC60

It is a structure in which a ball of sintered population abrasive grain is attached to a foot made of fiber resin that comes out from the shaft.
The feet are made of nylon resin and are highly elastic. The inner surface of the workpiece is burr and the inner surface of the workpiece with irregularities can be polished.

YUKO Corporation

플렉스 혼 #AO60 AO60　BC-12.0 AO60

It is a structure in which a ball of sintered population abrasive grain is attached to a foot made of fiber resin that comes out from the shaft.
The feet are made of nylon resin and are highly elastic. The inner surface of the workpiece is burr and the inner surface of the workpiece with irregularities can be polished.

YUKO Corporation

플렉스 #AO180 AO18　BC-12.7 AO180

It is a structure in which a ball of sintered population abrasive grain is attached to a foot made of fiber resin that comes out from the shaft.
The feet are made of nylon resin and are highly elastic. The inner surface of the workpiece is burr and the inner surface of the workpiece with irregularities can be polished.

YUKO Corporation

플렉스 혼 #AO600 AO60　BC-12.7 AO600

It is a structure in which a ball of sintered population abrasive grain is attached to a foot made of fiber resin that comes out from the shaft.
The feet are made of nylon resin and are highly elastic. The inner surface of the workpiece is burr and the inner surface of the workpiece with irregularities can be polished.

YUKO Corporation

플렉스 혼 #SC600 SC60　BC-18.0 SC600

It is a structure in which a ball of sintered population abrasive grain is attached to a foot made of fiber resin that comes out from the shaft.
The feet are made of nylon resin and are highly elastic. The inner surface of the workpiece is burr and the inner surface of the workpiece with irregularities can be polished.

YUKO Corporation

플렉스 #AO120 AO12　BC-19.0 AO120

It is a structure in which a ball of sintered population abrasive grain is attached to a foot made of fiber resin that comes out from the shaft.
The feet are made of nylon resin and are highly elastic. The inner surface of the workpiece is burr and the inner surface of the workpiece with irregularities can be polished.

YUKO Corporation

플렉스 혼 #SC600 SC60　BC-19.0 SC600

It is a structure in which a ball of sintered population abrasive grain is attached to a foot made of fiber resin that comes out from the shaft.
The feet are made of nylon resin and are highly elastic. The inner surface of the workpiece is burr and the inner surface of the workpiece with irregularities can be polished.

YUKO Corporation

플렉스 혼 #AO320 AO32　BC-22.0 AO320

It is a structure in which a ball of sintered population abrasive grain is attached to a foot made of fiber resin that comes out from the shaft.
The feet are made of nylon resin and are highly elastic. The inner surface of the workpiece is burr and the inner surface of the workpiece with irregularities can be polished.

YUKO Corporation

플렉스 혼 #SC120 SC12　BC-23.8 SC120

It is a structure in which a ball of sintered population abrasive grain is attached to a foot made of fiber resin that comes out from the shaft.
The feet are made of nylon resin and are highly elastic. The inner surface of the workpiece is burr and the inner surface of the workpiece with irregularities can be polished.

YUKO Corporation

플렉스 혼 #AO240 AO24　BC-25.4 AO240

It is a structure in which a ball of sintered population abrasive grain is attached to a foot made of fiber resin that comes out from the shaft.
The feet are made of nylon resin and are highly elastic. The inner surface of the workpiece is burr and the inner surface of the workpiece with irregularities can be polished.

YUKO Corporation

플렉스 혼 #SC60 SC60　BC-29.0 SC60

It is a structure in which a ball of sintered population abrasive grain is attached to a foot made of fiber resin that comes out from the shaft.
The feet are made of nylon resin and are highly elastic. The inner surface of the workpiece is burr and the inner surface of the workpiece with irregularities can be polished.

YUKO Corporation

플렉스 혼 #SC320 SC32　BC-35.0 SC320

It is a structure in which a ball of sintered population abrasive grain is attached to a foot made of fiber resin that comes out from the shaft.
The feet are made of nylon resin and are highly elastic. The inner surface of the workpiece is burr and the inner surface of the workpiece with irregularities can be polished.

YUKO Corporation

플렉스 혼 #SC60 SC60　BC-35.0 SC60

It is a structure in which a ball of sintered population abrasive grain is attached to a foot made of fiber resin that comes out from the shaft.
The feet are made of nylon resin and are highly elastic. The inner surface of the workpiece is burr and the inner surface of the workpiece with irregularities can be polished.

YUKO Corporation

플렉스 혼 #SC180 SC18　BC-4.5 SC180

It is a structure in which a ball of sintered population abrasive grain is attached to a foot made of fiber resin that comes out from the shaft.
The feet are made of nylon resin and are highly elastic. The inner surface of the workpiece is burr and the inner surface of the workpiece with irregularities can be polished.

YUKO Corporation

플렉스 혼 #SC320 SC32　BC-41.0 SC320

It is a structure in which a ball of sintered population abrasive grain is attached to a foot made of fiber resin that comes out from the shaft.
The feet are made of nylon resin and are highly elastic. The inner surface of the workpiece is burr and the inner surface of the workpiece with irregularities can be polished.

YUKO Corporation

플렉스 혼 #AO240 AO24　BC-5.0 AO240

It is a structure in which a ball of sintered population abrasive grain is attached to a foot made of fiber resin that comes out from the shaft.
The feet are made of nylon resin and are highly elastic. The inner surface of the workpiece is burr and the inner surface of the workpiece with irregularities can be polished.

YUKO Corporation

플렉스 #AO120 AO12　BC-51.0 AO120

It is a structure in which a ball of sintered population abrasive grain is attached to a foot made of fiber resin that comes out from the shaft.
The feet are made of nylon resin and are highly elastic. The inner surface of the workpiece is burr and the inner surface of the workpiece with irregularities can be polished.