[DIJET INDUSTRIAL Co., Ltd.]탄화물 코팅 드릴
필터
-
탄화물 드릴(평판드릴, DZ코팅 TiAlN, 블레이드 직경 3 × 블레이드 길이 12mm) TLDM030
Drill for counterboring with "flat" front.
It is possible to perform stable machining without pre-holes even in inclined plane and cross hole machining.1 제품을 찾았습니다.
JPY: 11,900
USD: 74.65
-
탄화물 드릴(평판드릴, DZ코팅 TiAlN, 블레이드 직경 3.1 × 블레이드 길이 12mm) TLDM031
Drill for counterboring with "flat" front.
It is possible to perform stable machining without pre-holes even in inclined plane and cross hole machining.1 제품을 찾았습니다.
JPY: 12,700
USD: 79.66
-
탄화물 드릴(평판드릴, DZ코팅 TiAlN, 블레이드 직경 3.2 × 블레이드 길이 12mm) TLDM032
Drill for counterboring with "flat" front.
It is possible to perform stable machining without pre-holes even in inclined plane and cross hole machining.1 제품을 찾았습니다.
JPY: 12,700
USD: 79.66
-
탄화물 드릴(평판드릴, DZ코팅 TiAlN, 블레이드 직경 3.3 × 블레이드 길이 13mm) TLDM033
Drill for counterboring with "flat" front.
It is possible to perform stable machining without pre-holes even in inclined plane and cross hole machining.1 제품을 찾았습니다.
JPY: 12,700
USD: 79.66
-
탄화물 드릴(평판드릴, DZ코팅 TiAlN, 블레이드 직경 3.4 × 블레이드 길이 13mm) TLDM034
Drill for counterboring with "flat" front.
It is possible to perform stable machining without pre-holes even in inclined plane and cross hole machining.1 제품을 찾았습니다.
JPY: 12,700
USD: 79.66
-
탄화물 드릴(평판드릴, DZ코팅 TiAlN, 블레이드 직경 3.5 × 블레이드 길이 13mm) TLDM035
Drill for counterboring with "flat" front.
It is possible to perform stable machining without pre-holes even in inclined plane and cross hole machining.1 제품을 찾았습니다.
JPY: 12,700
USD: 79.66
-
탄화물 드릴(평판드릴, DZ코팅 TiAlN, 블레이드 직경 3.6 × 블레이드 길이 14mm) TLDM036
Drill for counterboring with "flat" front.
It is possible to perform stable machining without pre-holes even in inclined plane and cross hole machining.1 제품을 찾았습니다.
JPY: 13,100
USD: 82.17
-
탄화물 드릴(평판드릴, DZ코팅 TiAlN, 블레이드 직경 3.7 × 블레이드 길이 14mm) TLDM037
Drill for counterboring with "flat" front.
It is possible to perform stable machining without pre-holes even in inclined plane and cross hole machining.1 제품을 찾았습니다.
JPY: 13,100
USD: 82.17
-
탄화물 드릴(평판드릴, DZ코팅 TiAlN, 블레이드 직경 3.8 × 블레이드 길이 15mm) TLDM038
Drill for counterboring with "flat" front.
It is possible to perform stable machining without pre-holes even in inclined plane and cross hole machining.1 제품을 찾았습니다.
JPY: 13,100
USD: 82.17
-
탄화물 드릴(평판드릴, DZ코팅 TiAlN, 블레이드 직경 3.9 × 블레이드 길이 15mm) TLDM039
Drill for counterboring with "flat" front.
It is possible to perform stable machining without pre-holes even in inclined plane and cross hole machining.1 제품을 찾았습니다.
JPY: 13,100
USD: 82.17
-
탄화물 드릴(평판드릴, DZ코팅 TiAlN, 블레이드 직경 4 × 블레이드 길이 15mm) TLDM040
Drill for counterboring with "flat" front.
It is possible to perform stable machining without pre-holes even in inclined plane and cross hole machining.1 제품을 찾았습니다.
JPY: 13,100
USD: 82.17
-
탄화물 드릴(평판드릴, DZ코팅 TiAlN, 블레이드 직경 4.1 × 블레이드 길이 16mm) TLDM041
Drill for counterboring with "flat" front.
It is possible to perform stable machining without pre-holes even in inclined plane and cross hole machining.1 제품을 찾았습니다.
JPY: 14,100
USD: 88.45
-
탄화물 드릴(평판드릴, DZ코팅 TiAlN, 블레이드 직경 4.2 × 블레이드 길이 16mm) TLDM042
Drill for counterboring with "flat" front.
It is possible to perform stable machining without pre-holes even in inclined plane and cross hole machining.1 제품을 찾았습니다.
JPY: 14,100
USD: 88.45
-
탄화물 드릴(평판드릴, DZ코팅 TiAlN, 블레이드 직경 4.3 × 블레이드 길이 17mm) TLDM043
Drill for counterboring with "flat" front.
It is possible to perform stable machining without pre-holes even in inclined plane and cross hole machining.1 제품을 찾았습니다.
JPY: 14,100
USD: 88.45
-
탄화물 드릴(평판드릴, DZ코팅 TiAlN, 블레이드 직경 4.4 × 블레이드 길이 17mm) TLDM044
Drill for counterboring with "flat" front.
It is possible to perform stable machining without pre-holes even in inclined plane and cross hole machining.1 제품을 찾았습니다.
JPY: 14,100
USD: 88.45
-
탄화물 드릴(평판드릴, DZ코팅 TiAlN, 블레이드 직경 4.5 × 블레이드 길이 17mm) TLDM045
Drill for counterboring with "flat" front.
It is possible to perform stable machining without pre-holes even in inclined plane and cross hole machining.1 제품을 찾았습니다.
JPY: 14,100
USD: 88.45
-
탄화물 드릴(평판드릴, DZ코팅 TiAlN, 블레이드 직경 4.6 × 블레이드 길이 18mm) TLDM046
Drill for counterboring with "flat" front.
It is possible to perform stable machining without pre-holes even in inclined plane and cross hole machining.1 제품을 찾았습니다.
JPY: 15,300
USD: 95.97
-
탄화물 드릴(평판드릴, DZ코팅 TiAlN, 블레이드 직경 4.7 × 블레이드 길이 18mm) TLDM047
Drill for counterboring with "flat" front.
It is possible to perform stable machining without pre-holes even in inclined plane and cross hole machining.1 제품을 찾았습니다.
JPY: 15,300
USD: 95.97
-
탄화물 드릴(평판드릴, DZ코팅 TiAlN, 블레이드 직경 4.8 × 블레이드 길이 18mm) TLDM048
Drill for counterboring with "flat" front.
It is possible to perform stable machining without pre-holes even in inclined plane and cross hole machining.1 제품을 찾았습니다.
JPY: 15,300
USD: 95.97
-
탄화물 드릴(평판드릴, DZ코팅 TiAlN, 블레이드 직경 4.9 × 블레이드 길이 19mm) TLDM049
Drill for counterboring with "flat" front.
It is possible to perform stable machining without pre-holes even in inclined plane and cross hole machining.1 제품을 찾았습니다.
JPY: 15,300
USD: 95.97
-
탄화물 드릴(평판드릴, DZ코팅 TiAlN, 블레이드 직경 5 × 블레이드 길이 19mm) TLDM050
Drill for counterboring with "flat" front.
It is possible to perform stable machining without pre-holes even in inclined plane and cross hole machining.1 제품을 찾았습니다.
JPY: 15,300
USD: 95.97
-
탄화물 드릴(플랫 드릴, DZ 코팅 TiAlN, 블레이드 직경 5.1 × 블레이드 길이 20mm) TLDM051
Drill for counterboring with "flat" front.
It is possible to perform stable machining without pre-holes even in inclined plane and cross hole machining.1 제품을 찾았습니다.
JPY: 16,200
USD: 101.62
-
탄화물 드릴(플랫 드릴, DZ 코팅 TiAlN, 블레이드 직경 5.2 × 블레이드 길이 20mm) TLDM052
Drill for counterboring with "flat" front.
It is possible to perform stable machining without pre-holes even in inclined plane and cross hole machining.1 제품을 찾았습니다.
JPY: 16,200
USD: 101.62
-
탄화물 드릴(플랫 드릴, DZ 코팅 TiAlN, 블레이드 직경 5.3 × 블레이드 길이 20mm) TLDM053
Drill for counterboring with "flat" front.
It is possible to perform stable machining without pre-holes even in inclined plane and cross hole machining.1 제품을 찾았습니다.
JPY: 16,200
USD: 101.62
-
탄화물 드릴 (플랫 드릴, DZ 코팅 TiAlN, 블레이드 직경 5.4 × 블레이드 길이 21mm) TLDM054
Drill for counterboring with "flat" front.
It is possible to perform stable machining without pre-holes even in inclined plane and cross hole machining.1 제품을 찾았습니다.
JPY: 16,200
USD: 101.62
-
탄화물 드릴(플랫 드릴, DZ 코팅 TiAlN, 블레이드 직경 5.5 × 블레이드 길이 21mm) TLDM055
Drill for counterboring with "flat" front.
It is possible to perform stable machining without pre-holes even in inclined plane and cross hole machining.1 제품을 찾았습니다.
JPY: 16,200
USD: 101.62
-
탄화물 드릴 (플랫 드릴, DZ 코팅 TiAlN, 블레이드 직경 5.6 × 블레이드 길이 22mm) TLDM056
Drill for counterboring with "flat" front.
It is possible to perform stable machining without pre-holes even in inclined plane and cross hole machining.1 제품을 찾았습니다.
JPY: 17,400
USD: 109.15
-
탄화물 드릴 (플랫 드릴, DZ 코팅 TiAlN, 블레이드 직경 5.7 × 블레이드 길이 22mm) TLDM057
Drill for counterboring with "flat" front.
It is possible to perform stable machining without pre-holes even in inclined plane and cross hole machining.1 제품을 찾았습니다.
JPY: 17,400
USD: 109.15
-
탄화물 드릴 (플랫 드릴, DZ 코팅 TiAlN, 블레이드 직경 5.8 × 블레이드 길이 22mm) TLDM058
Drill for counterboring with "flat" front.
It is possible to perform stable machining without pre-holes even in inclined plane and cross hole machining.1 제품을 찾았습니다.
JPY: 17,400
USD: 109.15
-
탄화물 드릴 (플랫 드릴, DZ 코팅 TiAlN, 블레이드 직경 5.9 × 블레이드 길이 23mm) TLDM059
Drill for counterboring with "flat" front.
It is possible to perform stable machining without pre-holes even in inclined plane and cross hole machining.1 제품을 찾았습니다.
JPY: 17,400
USD: 109.15
-
탄화물 드릴(평판드릴, DZ코팅 TiAlN, 블레이드 직경 6 × 블레이드 길이 23mm) TLDM060
Drill for counterboring with "flat" front.
It is possible to perform stable machining without pre-holes even in inclined plane and cross hole machining.1 제품을 찾았습니다.
JPY: 16,300
USD: 102.25
-
탄화물 드릴(평판드릴, DZ코팅 TiAlN, 블레이드 직경 6.1 × 블레이드 길이 23mm) TLDM061
Drill for counterboring with "flat" front.
It is possible to perform stable machining without pre-holes even in inclined plane and cross hole machining.1 제품을 찾았습니다.
JPY: 18,100
USD: 113.54
-
탄화물 드릴(평판드릴, DZ코팅 TiAlN, 블레이드 직경 6.2 × 블레이드 길이 24mm) TLDM062
Drill for counterboring with "flat" front.
It is possible to perform stable machining without pre-holes even in inclined plane and cross hole machining.1 제품을 찾았습니다.
JPY: 18,100
USD: 113.54
-
탄화물 드릴(평판드릴, DZ코팅 TiAlN, 블레이드 직경 6.3 × 블레이드 길이 24mm) TLDM063
Drill for counterboring with "flat" front.
It is possible to perform stable machining without pre-holes even in inclined plane and cross hole machining.1 제품을 찾았습니다.
JPY: 18,100
USD: 113.54
-
탄화물 드릴(평판드릴, DZ코팅 TiAlN, 블레이드 직경 6.4 × 블레이드 길이 25mm) TLDM064
Drill for counterboring with "flat" front.
It is possible to perform stable machining without pre-holes even in inclined plane and cross hole machining.1 제품을 찾았습니다.
JPY: 18,100
USD: 113.54
-
탄화물 드릴(평판드릴, DZ코팅 TiAlN, 블레이드 직경 6.5 × 블레이드 길이 25mm) TLDM065
Drill for counterboring with "flat" front.
It is possible to perform stable machining without pre-holes even in inclined plane and cross hole machining.1 제품을 찾았습니다.
JPY: 18,100
USD: 113.54
-
탄화물 드릴(평판드릴, DZ코팅 TiAlN, 블레이드 직경 6.6 × 블레이드 길이 25mm) TLDM066
Drill for counterboring with "flat" front.
It is possible to perform stable machining without pre-holes even in inclined plane and cross hole machining.1 제품을 찾았습니다.
JPY: 19,200
USD: 120.44
-
탄화물 드릴(평판드릴, DZ코팅 TiAlN, 블레이드 직경 6.7 × 블레이드 길이 26mm) TLDM067
Drill for counterboring with "flat" front.
It is possible to perform stable machining without pre-holes even in inclined plane and cross hole machining.1 제품을 찾았습니다.
JPY: 19,200
USD: 120.44
-
탄화물 드릴(평판드릴, DZ코팅 TiAlN, 블레이드 직경 6.8 × 블레이드 길이 26mm) TLDM068
Drill for counterboring with "flat" front.
It is possible to perform stable machining without pre-holes even in inclined plane and cross hole machining.1 제품을 찾았습니다.
JPY: 19,200
USD: 120.44
-
탄화물 드릴(플랫 드릴, DZ 코팅 TiAlN, 블레이드 직경 6.9 × 블레이드 길이 27mm) TLDM069
Drill for counterboring with "flat" front.
It is possible to perform stable machining without pre-holes even in inclined plane and cross hole machining.1 제품을 찾았습니다.
JPY: 19,200
USD: 120.44
