Guhring Japan Corporation

사각 엔드밀 (3개의 블레이드, 비틀림 각도 45도, 위1.0 × 블레이드 길이 2mm)

Guhring Japan Corporation

엔드밀(멀티리드, RF 100 F, 절단하기 쉬운 재료, 일반 4개 블레이드, 길이 11mm × 4개 블레이드)

Guhring Japan Corporation

엔드밀(Endmill)(멀티리드, RF 100U, 범용, 4개 블레이드 일반, 위4 × 블레이드 길이 11mm)

Guhring Japan Corporation

스퀘어 엔드밀 (멀티리드, RF 100 SF, 고효율 마감용 6 블레이드, 위8 × 블레이드 길이: 19mm)

Guhring Japan Corporation

탄화물 황삭 엔드밀 (4 블레이드, × 블레이드 길이: (13)

Guhring Japan Corporation

탄화물 드릴(작은 직경, 알루미나 코팅, 로0.1 × 블레이드 길이 1.2 × 총 길이 38mm)

Guhring Japan Corporation

탄화물 드릴(작은 직경, 알루미나 코팅, 위1.0 × 블레이드 길이 10 × 총 길이 38mm)

Guhring Japan Corporation

탄화물 드릴(작은 직경, 알루미나 코팅, 위2.0 × 블레이드 길이 12 × 총 길이 38mm)

Guhring Japan Corporation

코발트 HSS 직선 드릴 (94 x 총 길이 142mm, 블리스터 팩)

Guhring Japan Corporation

HSS 직선 드릴 (Ø10.7 x 블레이드 길이 94 x 총 길이 142mm, 블리스터 팩)

Guhring Japan Corporation

나선 탭(미터 스레드, 수직, TIN 코팅, M2 x 0.4, 나사 길이: 4, 정밀도: OH2)

Guhring Japan Corporation

포인트 탭 (메트릭 스레드) 거친 TIN 코팅 M2x0.4 나사 길이: 8 정확도: OH2

Guhring Japan Corporation

M2x0 4 나사 길이: 4 정확도: RH4

Guhring Japan Corporation

초경합금 솔리드.레드 밀링 커터 M6x1.0 0

Guhring Japan Corporation

초경합금 솔리드.M6x1.0이 있는 레드 밀링 커터 오일 구멍

Guhring Japan Corporation

NC 스포팅 드릴 카운터싱크 각도(°): 길이 90: 46 생크 지름:3

Guhring Japan Corporation

NC 스팟팅 드릴(알루미나 코트) 카운터싱크 각도(°): 길이 90: 46 생크 지름:3

Guhring Japan Corporation

초경합금 NC 스포팅 드릴 카운터싱크 각도(°): 길이 90: 62 생크 지름:5

Guhring Japan Corporation

초경합금 NC 스포팅 드릴(알루미나 코트) 카운터싱크 각도(°): 길이 90: 62 생크 지름:5

Guhring Japan Corporation

TiAlN 초경합금 압연 파워 탭 코어스 M10. 0X1.5　4447-M10.0X1.5

Since plastic deformation forms a thread, chips do not come out.
With coolant duct.

Guhring Japan Corporation

TiAlN 초경합금 압연 파워 탭 코어스 M12. 0X1.75　4447-M12.0X1.75

Since plastic deformation forms a thread, chips do not come out.
With coolant duct.

Guhring Japan Corporation

TiAlN 초경합금 압연 파워 탭 코어스 M16. 0X2.0　4447-M16.0X2.0

Since plastic deformation forms a thread, chips do not come out.
With coolant duct.

Guhring Japan Corporation

TiAlN 초경합금 압연 파워 탭 코어스 M20. 0X2.5　4447-M20.0X2.5

Since plastic deformation forms a thread, chips do not come out.
With coolant duct.

Guhring Japan Corporation

TiAlN 초경합금 압연 파워 탭 코어스 M5. 0X0.8　4447-M5.0X0.8

Since plastic deformation forms a thread, chips do not come out.
With coolant duct.

Guhring Japan Corporation

TiAlN 초경합금 압연 파워 탭 코어스 M6. 0X1.0　4447-M6.0X1.0

Since plastic deformation forms a thread, chips do not come out.
With coolant duct.

Guhring Japan Corporation

TiAlN 초경합금 압연 파워 탭 코어스 M8. 0X1.25　4447-M8.0X1.25

Since plastic deformation forms a thread, chips do not come out.
With coolant duct.

Guhring Japan Corporation

TiAlN 나선 탭(고효율, 굵은 스레드, M10X1.5)　4449-M10.0X1.5

The machining range of work material is wide, and high-efficiency machining is possible.
The combination of powder high speed and TiAlN coating reduces wear and provides long life.

Guhring Japan Corporation

TiAlN 나선 탭(고효율, 굵은 스레드, M12X1.7)　4449-M12.0X1.75

The machining range of work material is wide, and high-efficiency machining is possible.
The combination of powder high speed and TiAlN coating reduces wear and provides long life.

Guhring Japan Corporation

TiAlN 나선 탭(고효율, 굵은 스레드, M14X2.0)　4449-M14X2.0

The machining range of work material is wide, and high-efficiency machining is possible.
The combination of powder high speed and TiAlN coating reduces wear and provides long life.

Guhring Japan Corporation

TiAlN 나선 탭(고효율, 굵은 스레드, M16X2.0)　4449-M16.0X2.0

The machining range of work material is wide, and high-efficiency machining is possible.
The combination of powder high speed and TiAlN coating reduces wear and provides long life.

Guhring Japan Corporation

TiAlN 나선 탭(고효율, 굵은 스레드, M18X2.5)　4449-M18.0X2.5

The machining range of work material is wide, and high-efficiency machining is possible.
The combination of powder high speed and TiAlN coating reduces wear and provides long life.

Guhring Japan Corporation

TiAlN 나선 탭(고효율, 굵은 스레드, M2X0.4)　4449-M2.0X0.4

The machining range of work material is wide, and high-efficiency machining is possible.
Powdered Hice and TiAlN coating reduce wear and extend life.

Guhring Japan Corporation

TiAlN 나선 탭(고효율, 굵은 스레드, M2.5X0.45)　4449-M2.5X0.45

The machining range of work material is wide, and high-efficiency machining is possible.
The combination of powder high speed and TiAlN coating reduces wear and provides long life.

Guhring Japan Corporation

TiAlN 나선 탭(고효율, 굵은 스레드, M20X2.5)　4449-M20.0X2.5

The machining range of work material is wide, and high-efficiency machining is possible.
The combination of powder high speed and TiAlN coating reduces wear and provides long life.

Guhring Japan Corporation

TiAlN 나선 탭(고효율, 굵은 스레드, M3X0.5)　4449-M3.0X0.5

The machining range of work material is wide, and high-efficiency machining is possible.
The combination of powder high speed and TiAlN coating reduces wear and provides long life.

Guhring Japan Corporation

TiAlN 나선 탭(고효율, 굵은 스레드, M4X0.7)　4449-M4.0X0.7

The machining range of work material is wide, and high-efficiency machining is possible.
The combination of powder high speed and TiAlN coating reduces wear and provides long life.

Guhring Japan Corporation

TiAlN 나선 탭(고효율, 굵은 스레드, M5X0.8)　4449-M5.0X0.8

The machining range of work material is wide, and high-efficiency machining is possible.
The combination of powder high speed and TiAlN coating reduces wear and provides long life.

Guhring Japan Corporation

TiAlN 나선 탭(고효율, 굵은 스레드, M6x1.0)　4449-M6.0X1.0

The machining range of work material is wide, and high-efficiency machining is possible.
The combination of powder high speed and TiAlN coating reduces wear and provides long life.

Guhring Japan Corporation

TiAlN 나선 탭(고효율, 굵은 스레드, M8X1.25)　4449-M8.0X1.25

The machining range of work material is wide, and high-efficiency machining is possible.
The combination of powder high speed and TiAlN coating reduces wear and provides long life.

Guhring Japan Corporation

TiAlN 나선 탭(고효율, UNF, M10X1.0)　4450-M10.0X1.0

The machining range of work material is wide, and high-efficiency machining is possible.
The combination of powder high speed and TiAlN coating reduces wear and provides long life.