[SANKO TECHNO CO., LTD.] AllProducts
공장 작업 도구 및 용품
-
SANKO TECHNO 올코어 드릴 (L 150, LV Type SDS Shaft 25mm)
21 제품을 찾았습니다.
JPY: 7,040-
USD: 44.13-
-
SANKO TECHNO 올코어 드릴 (L 150, LV Type SDS Shaft 29mm)
20 제품을 찾았습니다.
JPY: 8,560-
USD: 53.66-
-
SANKO TECHNO 올코어 드릴 (L 150, LV Type SDS 샤프트 32mm)
11 제품을 찾았습니다.
JPY: 8,560-
USD: 53.66-
-
모든 드릴(타입 B, 진동, 블리스터 팩 Øs3.4 × 블레이드 길이 50)
6 제품을 찾았습니다.
JPY: 580-
USD: 3.64-
-
모든 드릴 (타입 B, 진동, 블리스터 팩 5 피스 Rich3.4 × 블레이드 길이 50)
6 제품을 찾았습니다.
JPY: 2,210-
USD: 13.85-
-
드릴(AMERA 시리즈, AMD 유형, 9.0 x 블레이드 길이 70)
5 제품을 찾았습니다.
JPY: 1,510-
USD: 9.47-
-
앵커 드릴 (ADX-SDS Type, 와 8.0 x 블레이드 길이 100 x 총 길이 160)
36 제품을 찾았습니다.
JPY: 1,760-
USD: 11.03-
-
콘크리트 드릴(파워 SDS, PWL 유형, 위5.0 x 블레이드 길이 100 x 총 길이 160)
13 제품을 찾았습니다.
JPY: 1,240-
USD: 7.77-
-
SDS Long Adapter(SANKO TECHNO, 500mm)
3 제품을 찾았습니다.
JPY: 14,600-
USD: 91.52-
-
모든 드릴 (SDS Type, Blister Pack Ø3.4 x Blade 길이 45 x 총 길이 110)
17 제품을 찾았습니다.
JPY: 969-
USD: 6.07-
-
앵커 드릴(ADX2-MAX, 위14.5 x 블레이드 길이 160 x 총 길이 300)
39 제품을 찾았습니다.
JPY: 6,000-
USD: 37.61-
-
앵커 드릴 (육각 축, 위 10.5 x 블레이드 길이 160 x 전체 길이 280)
45 제품을 찾았습니다.
JPY: 3,740-
USD: 23.44-
-
ผู้ถือมือของจุดยึดของด้ามจับอุปกรณ์เลเซอร์
4 제품을 찾았습니다.
JPY: 980-
USD: 6.14-
-
ผู้ถือสกอตเตอร์สําหรับอุปกรณ์เลเซอร์
6 제품을 찾았습니다.
JPY: 710-
USD: 4.45-
-
เครื่องจักรสําหรับอุปกรณ์เลเซอร์
2 제품을 찾았습니다.
JPY: 1,790-
USD: 11.22-
-
อาซาฮี คาเซย์ คอร์ปอเรชั่น เป็นฐานของระบบอุปกรณ์เลเซอร์
6 제품을 찾았습니다.
JPY: 4,840-
USD: 30.34-
-
Techno Asahi Casei Corporation คือ System Resin Set (epoxy resin)
4 제품을 찾았습니다.
JPY: 6,190-
USD: 38.80-
-
ประเภทเคมีของบริษัทเทคโนอาซาฮี คาเซอิ คอร์ปอเรชั่น (การหมุน ประเภทระเบิด)
23 제품을 찾았습니다.
JPY: 240-
USD: 1.50-
-
ประเภทเคมีของบริษัทอาซาฮี คาเซย์ (การหมุน, การเป่าประเภทฟิล์ม)
7 제품을 찾았습니다.
JPY: 190-
USD: 1.19-
-
ประเภท MU ทางเคมีของอาซาฮี คาเซย์ (ประเภทที่ฝังไว้)
5 제품을 찾았습니다.
JPY: 260-
USD: 1.63-
-
-
-
สร้างจุดยึดหลังจากการสร้างเทนไซล์ทดสอบการโหลดเครื่อง AT-10D2
Tests up to 100 kN are possible with simple operation.
You can measure and store loads and displacements digitally.1 제품을 찾았습니다.
JPY: 1,054,286
USD: 6,608.70
-
เครื่องทดสอบการโหลดสายจุดยึด AT-200
Tests up to 200 kN are possible with simple operation.
The use of a lightweight aluminum cylinder has resulted in a weight reduction of 11 kg.1 제품을 찾았습니다.
JPY: 2,372,143
USD: 14,869.57
-
-
-
-
เพาเวอร์แทป ซิงค์ ไดกิ คอร์ปอเรชั่น BT-4X25-P100
It is a simple construction that only tightens with a screwdriver.
For Gypsum Board, Plywood and Cakal Board (8 mm or less).1 제품을 찾았습니다.
JPY: 6,730
USD: 42.19
-
รายการแพ็คสําหรับบอร์ด BTP-3.5X25-P100
It is a simple construction that can be fastened with a screwdriver.
It is also ideal for GL method.1 제품을 찾았습니다.
JPY: 6,730
USD: 42.19
-
-
-
레이저 장비 AL-H-SDS Type M10, W3/8의 모든 머신 홀더용 앵커
2 제품을 찾았습니다.
JPY: 8,620-
USD: 54.03-
-
ALC 드라이브 ALD 타입 스테인레스 스틸 ALD435P
9 제품을 찾았습니다.
JPY: 3,129-
USD: 19.61-
-
-
보드 패스너 유형 B 강철 B438P B-438P
The screws can be attached and detached freely.
Simple construction gives a uniform finish.1 제품을 찾았습니다.
JPY: 1,757
USD: 11.01
-
테크노 올 앵커 전용 전자유압기계 앵커 구동기 SD-365R
All anchors can be installed safely, reliably and comfortably.
It can be easily installed in narrow places and ceilings.1 제품을 찾았습니다.
JPY: 160,800
USD: 1,007.96
-
선 코스트 브러시 W0910 W-0910
Brush for cleaning chips in holes.
Finely scratch the surface of the concrete hole at the wire part to increase the sticking force of the adhesive anchor.1 제품을 찾았습니다.
JPY: 1,297
USD: 8.13
-
썬 코와브러쉬 W 1213 W-1213
Finely scratch the surface of the concrete hole at the wire part to increase the sticking force of the adhesive anchor.
Brush for cleaning chips in holes.1 제품을 찾았습니다.
JPY: 1,390
USD: 8.71
-
썬 코와브러쉬 W 1415 W-1415
Finely scratch the surface of the concrete hole at the wire part to increase the sticking force of the adhesive anchor.
Brush for cleaning chips in holes.1 제품을 찾았습니다.
JPY: 1,297
USD: 8.13
-
썬 코와브러쉬 W 1618 W-1618
Finely scratch the surface of the concrete hole at the wire part to increase the sticking force of the adhesive anchor.
Brush for cleaning chips in holes.1 제품을 찾았습니다.
JPY: 1,297
USD: 8.13
