HIRAI TOOL CORPORATION

Mag Catch 도구

HIRAI TOOL CORPORATION

Rubber Grip 드라이버 시트 가지 6.3 x 100mm

HIRAI TOOL CORPORATION

Cushion Electric Works 드라이버 시트 가지 6.0 x 100mm

HIRAI TOOL CORPORATION

강력한 드라이버를 통한 사각형 샤프트

HIRAI TOOL CORPORATION

2방향 쿠션 스터비　D-37W

Cushion handle with shibboleth to suppress slippage of hands.
The insertion part is 6.35 mm.

HIRAI TOOL CORPORATION

쿠션래칫라이트, 조인트　D-88J

It glows in the dark, so you can avoid losing it.
This is a normal size ratchet type bit replacement type driver with joints attached to the D-88.

HIRAI TOOL CORPORATION

너트 드라이버

HIRAI TOOL CORPORATION

Bis catch 드라이버 - 4.3mm x 200mm

HIRAI TOOL CORPORATION

광폭 드라이버

HIRAI TOOL CORPORATION

후크 도구 L 유형　D-HK1

The L-shaped tip can be used for various tasks such as removing dust and removing hoses.

HIRAI TOOL CORPORATION

후크 도구 후크 유형　D-HK2

The tip part is bent into a hook shape, so it is convenient to use for various purposes such as removing garbage and drawing out hoses.
For pulling out hoses used in automobiles, maintenance of machinery, removal of garbage, etc.

HIRAI TOOL CORPORATION

엘도라　D-19

Since it is bent at 20 mm below the neck, it can be tightened at corner corners where a normal driver cannot enter or in places where there are narrow obstacles.
The shaft has a fully quenched black point processing magnet.

HIRAI TOOL CORPORATION

풀 아타카오(쿠기누키)　D-16

All-purpose strong tool with full body quenching type through angular shaft.
Comes with a hammer.

HIRAI TOOL CORPORATION

긴 공격자(범용 가우징 도구)　D-15L

Comes with a hammer.
All-purpose strong tool with full body quenching type through angular shaft.

HIRAI TOOL CORPORATION

작은 도구 제거　D-RM1

The tip is thin and can be used to remove clips from the lining of automobiles.
For removing the lining of an automobile or removing a clip, etc.

HIRAI TOOL CORPORATION

트리플 슬림비트 200mm　D-TSB-200

Suitable for tightening hard screws and heavy work.
This thickness of the center part and the slim part is hard to break even when working, relieves impact and transmits torque ideally. (PAT.) Long Type (200 mm) Torsion Type Bit.

HIRAI TOOL CORPORATION

내장 비트 영향 대응 유형　D-14

You can work without dropping stainless steel screws that don't have magnets. (PAT.)
Charging impact driver 14.4 V compatible 6.35 mm bit.

HIRAI TOOL CORPORATION

비스 캐치 드라이버 세트　D-12SET

You can work by attaching screws in places where fingertips cannot reach or holding stainless steel screws that do not work with magnets.
This set can handle most Phillips screws.

HIRAI TOOL CORPORATION

대형 이동식 도구　D-RM2

The tip is thin and can be used for removing the lining of a car.
For removing the lining of cars and removing clips.

HIRAI TOOL CORPORATION

［단종］육군 렌치 10 6 피스 세트

HIRAI TOOL CORPORATION

［단종］비상용 변기 세트(10회)

HIRAI TOOL CORPORATION

［단종］항균성 화장실세트(30회)