[ICHINEN TASCO CO., LTD.]절삭 공구
필터
-
동제의 관 브러쉬 TA504CB
Ideal for removing oxide film and dirt from the inner and outer surfaces of pipes before brazing.
The body is made of resin and has a double screw fastening structure, so it is easy to replace the replacement brush.1 제품을 찾았습니다.
JPY: 1,220
USD: 7.65
-
-
동관 확공기 TA530
Since it has 5 blades, it can be used for deburring.
It has a finishing file.1 제품을 찾았습니다.
JPY: 4,200
USD: 26.33
-
대구경 파이프 리머 TA530DM
Can deburr inner and outer surfaces.
With a hexagonal shaft for use with an electric drill.1 제품을 찾았습니다.
JPY: 38,000
USD: 238.20
-
마무리용 파일 TA530Y
Used to trim the cut surface of copper pipe after reaming.
details1 제품을 찾았습니다.
JPY: 3,000
USD: 18.81
-
-
나사 잠금 TA930
For relatively small detachable screws of M6 or less.
An inhibitor for loosening, leaking, and rusting screws.1 제품을 찾았습니다.
JPY: 2,690
USD: 16.86
-
나사 잠금 슈퍼 TA930A
Low strength type
Apply to gaps in metal parts such as screws and shafts to start curing by blocking air.1 제품을 찾았습니다.
JPY: 4,400
USD: 27.58
-
플레어너트 풀림방지제 TA930R
Low Strength Type
Prevents loosening of the flare nut due to vibration.1 제품을 찾았습니다.
JPY: 5,800
USD: 36.36
-
냉매 배관 단열재용 접착제 TA931RB
If the adhesive film is transparent, the protruding part will not be noticeable.
There is no corrosion of the copper pipe even when it is directly attached to the refrigerant copper pipe.1 제품을 찾았습니다.
JPY: 1,350
USD: 8.46
-
-
-
-
-
-
-
-
매우 긴 드릴 TA655MP
Cross blade shape that can penetrate the deck plate.
1 제품을 찾았습니다.
JPY: 10,400
USD: 65.19
-
-
육각축 가죽 비트 세트 TA668RA
5 Piece Set of 5, 8, 10, 13, 15 mm
Shank 1/4′′ (6.35 mm) Hexagonal Shaft1 제품을 찾았습니다.
JPY: 7,410
USD: 46.45
-
-
티타늄 코팅 스텝 드릴 TA681MA
Beautiful cutting surface! You can drill 10 size holes with 1!
The cutting edge is thinned, which increases the cutting speed and creates a beautiful cutting surface.1 제품을 찾았습니다.
JPY: 8,150
USD: 51.09
-
-
-
-
모든 나사에 대한 너트 빠른 회전 비트 TA732NT
Attach it to your impact screwdriver for easy work.
Can be used even if there are obstacles in the front and back of the nut.1 제품을 찾았습니다.
JPY: 1,710
USD: 10.72
-
-
-
-
-
［단종］스테인리스 스틸 파이프 리머 TA530DK
Can deburr inner and outer surfaces.
Smooth deburring and beautiful finish with 40 blades from stainless steel pipe to copper pipe.1 제품을 찾았습니다.
JPY: 11,010
USD: 69.02
-
-
-
-
-
-
［단종］드릴링용 드릴 가이드 TA404RJ
Before drilling a hole in the wall, you can see where the drill tip comes out. Essential items for drilling operations such as electrical wiring, cable installation, and concrete detection.
Can be used on various types of non-magnetic wall surfaces up to 300 mm thick, including wood, tile, gypsum board, brick, and concrete1 제품을 찾았습니다.
JPY: 30,700
USD: 192.44
-
-
-
［단종］스텝 드릴(충격 드라이버용) 4-14mm
2 제품을 찾았습니다.
JPY: 10,970-
USD: 68.76-
