69-9194-83 Bushing for Mitsuboshi Belt Maxter Wedge Pulley R1-75N-JIS
기능
- Can be easily attached to and removed from the shaft with a single spanner.
- No damage to shaft and shaft holes. When attaching to the shaft, it enters smoothly, and tightens firmly using the taper by tightening the tightening bolt, so there is no slight wear at the fitting part during use, and the life of the shaft is extended.
- Since shaft holes and key grooves corresponding to the standard shaft diameter are machined on the bushing, machining is not required during use.
- Position change of rotating body such as pulley on shaft is smooth, and centering can be easily performed.
사양
- Shape: R1
- Type: Type 2
- Shaft Hole Diameter (mm): 75
- Key Dimensions (mm): 20 x 12
- L(mm):73
- U(mm):15.9
- T(mm):57.1
- D (mm) Large Diameter: 101.6
- D (mm) Small Diameter: 98.425
- H(mm):136.5
- V(mm):117.5
- W(mm):20
- X(mm):50.8
- Y(mm):6.3
- R(mm):6.3
- S(mm):7
- Number of bolts: 3
- Bolt Size: M10 x 40
- Approximate mass (kg): 3.4
| 주문 번호 | 69-9194-83 | |
|---|---|---|
| 모델 번호 | R1-75N-JIS | |
| 표준 가격 |
JPY: 24,070
USD: 150.88
Excange rate 1USD= 159.53JPY
Valid price in Japan |
|
| 수량 | 1piece | |
| 일본의 주식 |
|
|
| 공급자 재고 |
|
|
다양한 상품군(多樣한) (다른 사이즈,다른 사양,옵션등)
| 제품 이미지 | 주문 번호 | 이름 | 모델 번호 | 수량 | 표준 가격 | 일본에서의 유효 가격 | 재고 [공급자 재고] |
|
|---|---|---|---|---|---|---|---|---|
 |
69-9189-65 | Bushing for Mitsuboshi Belt Maxter Wedge Pulley H-32N-JIS | H-32N-JIS | 1piece | JPY: 6,550 | USD: 41.06 |
|
|
 |
69-9189-66 | Bushing for Mitsuboshi Belt Maxter Wedge Pulley H-35N-JIS | H-35N-JIS | 1piece | JPY: 6,550 | USD: 41.06 |
|
|
 |
69-9194-82 | Bushing for Mitsuboshi Belt Maxter Wedge Pulley Q1-30N-JIS | Q1-30N-JIS | 1piece | JPY: 12,350 | USD: 77.42 |
|
|
 |
69-9194-83 | Bushing for Mitsuboshi Belt Maxter Wedge Pulley R1-75N-JIS | R1-75N-JIS | 1piece | JPY: 24,070 | USD: 150.88 |
|
|
 |
69-9200-02 | Bushing for Mitsuboshi Belt Maxter Wedge Pulley W1-130N-JIS | W1-130N-JIS | 1piece | JPY: 429,650 | USD: 2,693.22 |
|