사양

• Plug
• MALC-2~6HP-FL Model (Flange Fixed Type for High Pressure)
• Mass (g): 179
• Dimension (L1) (mm): 33
• Dimension (L2) (mm): (20)
• Dimension (L3) (mm): 6
• Dimensions (□S) (mm): 45
• Maximum Working Pressure: 21.0 MPa{214kgf/cm2} (Single Unit/8.0 MPa{81kgf/cm2})
• Valve Structure: Double-Way Open/Close Type (Liquid Dripping Reduction Type)
• Applicable fluid: hydraulic fluid
• Body Material: Special Steel (Surface Treatment/Electroless Nickel Phosphorus Plating)
• Withstand Pressure: 31.5 MPa{321kgf/cm2} (Single Unit/12.0 MPa{122kgf/cm2})
• Seal Material: Fluororubber (FKM)
• Operating temperature range *: -20 to +180°C
• *The available temperature range depends on the operating conditions.
• Recommended maximum tightening torque: 9 N · m{91kgf · cm}
• Compatibility: The socket and plug can be connected in the same size regardless of the mounting shape.
• Minimum cross-sectional area: 87 mm2
• Suitable for Vacuum Applications: Cannot be used for vacuum applications, either alone or connected.
• Amount of air mixed at the time of connection: 0.26 mL * Varies depending on operating conditions
• Amount of liquid dripping at the time of separation: 0.26 mL * Varies according to operating conditions
• Maximum connection holding force: 22000 N{2244kgf}
• Minimum Connection Holding Force Calculated *: P×460+190 N{p×4.6+19kgf}
• *Substitute the actual pressure [P (MPa), p (kgf/cm2)]. Use a force greater than the required minimum connection holding force. Do not exceed the maximum connection holding force.
•